Skip to contentSkip to conversation

How to change PCI Configuration space?

DISCUSSION Rajat Jain 3 participants 6 messages Aug 30, 2005 – Aug 31, 2005

lore
Share & tools
lore

Rajat Jain

author
#0 lore raw

Hi List,

I want to change the PCI Configuration space of a particular device in my system. I am trying to use the "pcitweak" utility to do so, but am not suceeding. I would appreciate if some body could provide me any pointers in how to do so.

In this case, I want to change the value at offset 64:

$ pcitweak -r 5:9:1 64
0x01000001                 //original value
$ pcitweak -w 5:9:1 64 0x02000002      //new value
$ pcitweak -r 5:9:1 64
0x01000001                //no change?

TIA,

Rajat Jain
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 4 lines · Rajat Jain

I want to change the PCI Configuration space of a particular device in my system. I am trying to use the "pcitweak" utility to do so, but am not suceeding. I would appreciate if some body could provide me any pointers in how to do so.

Don't use pcitweak. Use setpci instead.

Signature · 11 lines
"Next the statesmen will invent cheap lies, putting the blame upon 
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince 
himself that the war is just, and will thank God for the better sleep 
he enjoys after this process of grotesque self-deception." -- Mark Twain
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
In reply to Rajat Jain
Quoted 12 lines · Rajat Jain

Hi List,

I want to change the PCI Configuration space of a particular device in my system. I am trying to use the "pcitweak" utility to do so, but am not suceeding. I would appreciate if some body could provide me any pointers in how to do so.

In this case, I want to change the value at offset 64:

$ pcitweak -r 5:9:1 64
0x01000001                 //original value
Quoted 8 lines
$ pcitweak -w 5:9:1 64 0x02000002      //new value
$ pcitweak -r 5:9:1 64
0x01000001                //no change?

TIA,

Rajat Jain

Dear Rajat Jain:

'man pcitweak' indicates that it requires root privileges.
the '$' prompt in your console indicates 'user' privileges. My 'root' prompt is a '#'.
I suggest that you do not have 'root' privileges when executing a '-w' (write) command.

HTH, Chuck

"Pcitweak is a utility that can be used to examine or
change registers in the PCI configuration space. On most platfoms pcitweak can only be run by the root user."
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#3 lore raw
Quoted 30 lines · chuck gelm
Quoted 12 lines · Rajat Jain

Hi List,

I want to change the PCI Configuration space of a particular device in my system. I am trying to use the "pcitweak" utility to do so, but am not suceeding. I would appreciate if some body could provide me any pointers in how to do so.

In this case, I want to change the value at offset 64:

$ pcitweak -r 5:9:1 64
0x01000001                 //original value
Quoted 8 lines
$ pcitweak -w 5:9:1 64 0x02000002      //new value
$ pcitweak -r 5:9:1 64
0x01000001                //no change?

TIA,

Rajat Jain

Dear Rajat Jain:

'man pcitweak' indicates that it requires root privileges.
the '$' prompt in your console indicates 'user' privileges. My 'root' prompt is a '#'.
I suggest that you do not have 'root' privileges when executing a '-w' (write) command.

Quoted 6 lines

HTH, Chuck

"Pcitweak is a utility that can be used to examine or
change registers in the PCI configuration space. On most platfoms pcitweak can only be run by the root user."

Un ... I'm sorry ... I put that "$" prompt manually here in this mail. I AM the root and working on the "#" prompt. I would appreciate if somebody can tell me any other commands than "pcitweak" and "setpci" to change PCI configuration space.

Thanks & Regards,

Rajat Jain
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#4 lore raw
Quoted 42 lines · Rajat Jain
Quoted 31 lines · chuck gelm
Quoted 12 lines · Rajat Jain

Hi List,

I want to change the PCI Configuration space of a particular device in my system. I am trying to use the "pcitweak" utility to do so, but am not suceeding. I would appreciate if some body could provide me any pointers in how to do so.

In this case, I want to change the value at offset 64:

$ pcitweak -r 5:9:1 64
0x01000001                 //original value
Quoted 8 lines
$ pcitweak -w 5:9:1 64 0x02000002      //new value
$ pcitweak -r 5:9:1 64
0x01000001                //no change?

TIA,

Rajat Jain

Dear Rajat Jain:

'man pcitweak' indicates that it requires root privileges. the '$' prompt in your console indicates 'user' privileges. My 'root' prompt is a '#'.
I suggest that you do not have 'root' privileges when executing a '-w' (write) command.

Quoted 6 lines

HTH, Chuck

"Pcitweak is a utility that can be used to examine or change registers in the PCI configuration space. On most platfoms pcitweak can only be run by the root user."

Quoted 8 lines

Un ... I'm sorry ... I put that "$" prompt manually here in this mail. I AM the root and working on the "#" prompt. I would appreciate if somebody can tell me any other commands than "pcitweak" and "setpci" to change PCI configuration space.

Thanks & Regards,

Rajat Jain

Hi, Rajat Jain:

Sorry, I cannot help. Just for fun, I used pcitweak, scanpci, lspci,
and 'cat /proc/pci' and looked at my two rtl8139 ethernet cards. I think I found that they have 256 bytes of memory; one card uses memory 0x3e014000 - 0x3e140ff or 0x100 bytes.
(cat /proc/pci |grep -A 1 -B 4 ealtek)

pcitweak read 32 bits (4 bytes) so
pcitweak 0:9:0 -r 0
would show bytes offset 0, 1, 2, & 3.

pcitweak 0:9:0 -r[-w] 64 [value]
would read[write] bytes offset 64, 65, 66, 67
or 0x100, 0x101, 0x102, 0x103
which is undefined. There might be no RAM memory at byte offset 64.

I also used pcitweak 0:9:0 -r 4096, which I assume is outside the
configuration space of my pci device, but pcitweak dutifully displayed output. :-|

Hopefully you are not writing to ROM. :-|

Good luck,
Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#5 lore raw
In reply to Rajat Jain
Quoted 12 lines · Rajat Jain

Hi List,

I want to change the PCI Configuration space of a particular device in my system. I am trying to use the "pcitweak" utility to do so, but am not suceeding. I would appreciate if some body could provide me any pointers in how to do so.

In this case, I want to change the value at offset 64:

$ pcitweak -r 5:9:1 64
0x01000001                 //original value
Quoted 8 lines
$ pcitweak -w 5:9:1 64 0x02000002      //new value
$ pcitweak -r 5:9:1 64
0x01000001                //no change?

TIA,

Rajat Jain

(This response is limited to linux-newbie, although there should be a better list-server for this depth of a problem.)

Hi, Rajat Jain:

Sorry, I cannot help. Just for fun, I used pcitweak, scanpci, lspci,
and 'cat /proc/pci' and looked at my two rtl8139 ethernet cards. I think I found that they have 256 bytes of memory; one card uses memory 0x3e014000 - 0x3e140ff or 0x100 bytes.
(cat /proc/pci |grep -A 1 -B 4 ealtek)

pcitweak read 32 bits (4 bytes) so
pcitweak 0:9:0 -r 0
would show bytes offset 0, 1, 2, & 3.

pcitweak 0:9:0 -r[-w] 64 [value]
would read[write] bytes offset 64, 65, 66, 67
or 0x100, 0x101, 0x102, 0x103
which is undefined. There might be no memory at byte offset 64.

I also used pcitweak 0:9:0 -r 4096, which I assume is outside the
configuration space of my pci device, but pcitweak dutifully displayed output. :-|

Hopefully you are not writing to ROM. :-|

Good luck,
Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs