MTD/uclinux help
Hello all
I am using the following NAND flash device : Samsung K9F5608UOC i have tried to add it to the nand_ids.h file with these parameters.
{"Samsung K9F5608UOC", NAND_MFR_SAMSUNG, 0x75, 25, 0, 2, 0x4000}
However when i boot i get a kernel panic
Any ideas?
thanks in advance
Isack
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello all,
first of, i would like to thank Greg and Claudio, without your help guys i wouldn't be able to get to this stage, thanks a bunch.
at this point my system is recognizing the Nand device properly, and assigning 3 MTD devices for the 3 partitions I've created.
however when i try to do eraseall /dev/MTD# the system hangs. even when i try to do nandtest /dev/MTD# the system hangs just after asking me if i want to continue (because it erases the first block).
i am using 4.2.19 kernel (heavily modified for my hardware) any help will be appreciated.
thanks in advance
Isack
Quoted 108 lines · Claudio Lanconelli
Hi Isack,
I'm using uClinux-2_4_31_uc0. I build my custom hardware interface based on
edb7312.c
It seems to work with generic NAND 32MB 3,3V parameters innand_ids.cso I don't add any IDs.This is what my bootlog:
MBOPB scan for NAND...
NAND device: Manufacture ID:0xec, Chip ID:0x75(Samsung NAND 32MB 3,3V) Using static partition definition
Creating 3 MTD partitions on "NAND 32MB 3,3V":
0x00000000-0x00400000 : "MBOPB NandFlash partition 1" 0x00400000-0x00800000 : "MBOPB NandFlash partition 2" 0x00800000-0x02000000 : "MBOPB NandFlash partition 3"This is the content of
nand_ids.hstatic struct nand_flash_dev nand_flash_ids[] = { {"Toshiba TC5816BDC", NAND_MFR_TOSHIBA, 0x64, 21, 1, 2, 0x1000}, {"Toshiba TC5832DC", NAND_MFR_TOSHIBA, 0x6b, 22, 0, 2, 0x2000}, {"Toshiba TH58V128DC", NAND_MFR_TOSHIBA, 0x73, 24, 0, 2, 0x4000}, {"Toshiba TC58256FT/DC", NAND_MFR_TOSHIBA, 0x75, 25, 0, 2, 0x4000}, {"Toshiba TH58512FT", NAND_MFR_TOSHIBA, 0x76, 26, 0, 3, 0x4000}, {"Toshiba TC58V32DC", NAND_MFR_TOSHIBA, 0xe5, 22, 0, 2, 0x2000}, {"Toshiba TC58V64AFT/DC", NAND_MFR_TOSHIBA, 0xe6, 23, 0, 2, 0x2000}, {"Toshiba TC58V16BDC", NAND_MFR_TOSHIBA, 0xea, 21, 1, 2, 0x1000}, {"Samsung KM29N16000", NAND_MFR_SAMSUNG, 0x64, 21, 1, 2, 0x1000}, {"Samsung unknown 4Mb", NAND_MFR_SAMSUNG, 0x6b, 22, 0, 2, 0x2000}, {"Samsung KM29U128T", NAND_MFR_SAMSUNG, 0x73, 24, 0, 2, 0x4000}, {"Samsung KM29U256T", NAND_MFR_SAMSUNG, 0x75, 25, 0, 2, 0x4000}, {"Samsung KM29V512000", NAND_MFR_SAMSUNG, 0x76, 26, 0, 3, 0x4000}, {"Samsung KM29V1024000", NAND_MFR_SAMSUNG, 0x79, 27, 0, 3, 0x4000}, {"Samsung KM29W32000", NAND_MFR_SAMSUNG, 0xe3, 22, 0, 2, 0x2000}, {"Samsung KM29N32000", NAND_MFR_SAMSUNG, 0xe5, 22, 0, 2, 0x2000}, {"Samsung KM29U64000", NAND_MFR_SAMSUNG, 0xe6, 23, 0, 2, 0x2000}, {"Samsung KM29W16000", NAND_MFR_SAMSUNG, 0xea, 21, 1, 2, 0x1000}, {NULL,} };and
nand_ids.cstruct nand_flash_dev nand_flash_ids[] = { {"NAND 1MB 5V", 0x6e, 20, 0x1000, 1}, // 1Mb 5V {"NAND 2MB 5V", 0x64, 21, 0x1000, 1}, // 2Mb 5V {"NAND 4MB 5V", 0x6b, 22, 0x2000, 0}, // 4Mb 5V {"NAND 1MB 3,3V", 0xe8, 20, 0x1000, 1}, // 1Mb 3.3V {"NAND 1MB 3,3V", 0xec, 20, 0x1000, 1}, // 1Mb 3.3V {"NAND 2MB 3,3V", 0xea, 21, 0x1000, 1}, // 2Mb 3.3V {"NAND 4MB 3,3V", 0xd5, 22, 0x2000, 0}, // 4Mb 3.3V {"NAND 4MB 3,3V", 0xe3, 22, 0x2000, 0}, // 4Mb 3.3V {"NAND 4MB 3,3V", 0xe5, 22, 0x2000, 0}, // 4Mb 3.3V {"NAND 8MB 3,3V", 0xd6, 23, 0x2000, 0}, // 8Mb 3.3V {"NAND 8MB 3,3V", 0xe6, 23, 0x2000, 0}, // 8Mb 3.3V {"NAND 16MB 3,3V", 0x73, 24, 0x4000, 0},// 16Mb 3,3V {"NAND 32MB 3,3V", 0x75, 25, 0x4000, 0}, // 32Mb 3,3V {"NAND 64MB 3,3V", 0x76, 26, 0x4000, 0}, // 64Mb 3,3V {"NAND 128MB 3,3V", 0x79, 27, 0x4000, 0}, // 128Mb 3,3V {NULL,} };struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_TOSHIBA, "Toshiba"}, {NAND_MFR_SAMSUNG, "Samsung"}, {NAND_MFR_FUJITSU, "Fujitsu"}, {NAND_MFR_NATIONAL, "National"}, {0x0, "Unknown"} };Cheers,
Claudio LanconelliQuoted 30 lines · itche
On Friday 26 August 2005 11:09, Claudio Lanconelli wrote:
Hi Claudio,
Thanks for answering.
I'm using 2.4.
what parameters are there for this chip in your distribution? Thanks
IsackQuoted 22 lines
Hi Isack,
I use the same NAND chip on my board and it works without modifyingnand_ids.h
What is the kernel version you are using?Cheers,
Claudio LanconelliQuoted 13 lines · itche
Hello all
I am using the following NAND flash device : Samsung K9F5608UOC i have tried to add it to thenand_ids.hfile with these parameters.
{"Samsung K9F5608UOC",NAND_MFR_SAMSUNG,0x75, 25, 0, 2,0x4000}
However when i boot i get a kernel panic
Any ideas?
thanks in advance
Isack
_______________________________________________
uClinux-dev mailing list
[email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]_______________________________________________
uClinux-dev mailing list [email protected]
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by [email protected]