compiling u-boot for ppc on i386
I have host os: netbsd, host arch=i386, target platform is powerpc405, and targtos =netbsd.
I am trying to compile the using :
make walnut_config.
But it is failing with
line 35:Need an operator,
line 43:need an operator
line 45:need an operator
line 47:need an operator
what I am missing ?>
---------------------------------
Start your day with Yahoo! - make it your home page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050830/0af1dbde/attachment.htm
Quoted 6 lines · In message <[email protected]> you wrote:
I have host os: netbsd, host arch=i386, target platform is powerpc405, and targtos =netbsd.
I am trying to compile the using :
makewalnut_config.
Quoted 7 lines
But it is failing with
line 35:Need an operator,
line 43:need an operator
line 45:need an operator
line 47:need an operatorwhat I am missing ?>
You probably have to use GNU make (and eventually the bash as shell).
Quoted 5 lines
--0-1531297710-1125439948=:73515
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit<DIV>I have host os: netbsd, host arch=i386, target platform is powerpc405, and targtos =netbsd.</DIV>
And please don't post HTML on this list.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are three things I always forget. Names, faces - the third I can't remember. - Italo Svevo
I am using bash shell (3.0), and have gmake.
Quoted 26 lines · --- Wolfgang Denk
In message <[email protected]>
Quoted 2 lines · you
I have host os: netbsd, host arch=i386, target
platform is powerpc405, and targtos =netbsd.
Quoted 11 lines
I am trying to compile the using :
makewalnut_config.But it is failing with
line 35:Need an operator,
line 43:need an operator
line 45:need an operator
line 47:need an operatorwhat I am missing ?>
You probably have to use GNU make (and eventually the bash as shell).
Quoted 5 lines
--0-1531297710-1125439948=:73515
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit<DIV>I have host os: netbsd, host arch=i386,
Quoted 21 lines
target platform is powerpc405, and targtos =netbsd.</DIV>
And please don't post HTML on this list.
Best regards,
Wolfgang Denk
Signature · 8 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are three things I always forget. Names, faces - the third I can't remember. - Italo Svevo
-------------------------------------------------------
Quoted 12 lines
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement *
http://www.sqe.com/bsce5sf
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Quoted 1 line
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
I have
host os: netbsd2.0.2, host arch=i386,
target platform: powerpc405,targetos =netbsd.
I am getting this error
bash3.0# gmake CPU=CONFIG_405GP BOARD=CONFIG_WALNUT CROSS_COMPILE=powerpc-netbsd
under gmake -C examples
powerpc-netbsd-gcc -g -Os -D__KERNEL__ -DTEXT_BASE= -I/root/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/pkg/cross/lib/gcc-lib/powerpc-netbsd/egcs-2.91.60/include -pipe -D__PPC__ -DCONFIG_PPC -D__powerpc__ -Wall -Wstrict-prototypes -c -o hello_world.o hello_world.c Share object "libopcodes-2.9.1.so" not found hello_world.c: In function 'hello_world':
*****Error 1
I have binutils2.16 installed,
I used ./configure --target=powerpc-netbsd, this one builds fine...
under /usr/pkg/cross/lib/libopcodes.a, and
libopcodes.la is already present. How do I get
libopcodes-2.9.1.so ?
thanks
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
Quoted 4 lines · In message <[email protected]> you wrote:
I am getting this error
bash3.0# gmake CPU=CONFIG_405GP BOARD=CONFIG_WALNUT CROSS_COMPILE=powerpc-netbsd
I don't know where have this command from; you are not supposed to set CPU and BOARED on the command line.
Please follow the instructions.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Those who do not understand Unix are condemned to reinvent it, poorly. - Henry Spencer, University of Toronto Unix hack
[U-Boot-Users] loading netbsd image
In reply to Wolfgang DenkHost OS : netbsd, Target OS: netbsd
Host Arch =i386 Target arch : powerpc405
I have u-boot up and now I want to load my netbsd
kernel image.
According to u-boot readme, I need ppcboot
I downloaded ppcboot_stage from denx.de
I downloaded it in my root directory, when untarred it I found that it needs refernce to some netbsd files libkern.
Then I moved it the directory under netbsd source tree :/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot
I ran make image under ppcboot/
this is the output I got.
Don;t understand why it is picking up
i386-netbsdelf-gcc to compile.
I think it should pickup powerpc--netbsd-gcc
Am I missing any declaration ?
Is there any README for this stage-2 loader, explaining where to put this directory and what to set up before compilation.
making sure the sa library is up to date...
# compile sa/alloc.o/home/src/nbsrc/obj/tooldir.NetBSD-2.0.2-i386/bin/i386--netbsdelf-gcc
-g -Os -fomit-frame-pointer -ffixed-r14 -ffixed-r2
-fno-builtin -mcpu=860 -mstring -Werror
-I/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../../lib/libsa -I../../. -I/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../../arch -I/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../.. -nostdinc -D_LKM
-DPPC_INTR_IMPL="<powerpc/ibm4xx/ibm4xx_intr.h>" -DPPC_PCI_MACHDEP_IMPL="<powerpc/ibm4xx/pci_machdep.h>"
-nostdinc -isystem /usr/include -DCOMPAT_UFS
-D__INTERNAL_LIBSA_CREAD -nostdinc -isystem/usr/include -c /home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../../lib/libsa/alloc.c -o alloc.o.tmp /home/src/nbsrc/obj/tooldir.NetBSD-2.0.2-i386/bin/i386--netbsdelf-gcc:
not found
*** Error code 127
Stop.
make: stopped in /home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/lib/sa *** Error code 1
Stop.
make: stopped in /home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[U-Boot-Users] loading netbsd image
I think I have to tell MACHINE_ARCH
make MACHINE_ARCH=powerpc
Quoted 29 lines · --- manju mahajan
Host OS : netbsd, Target OS: netbsd Host Arch =i386 Target arch : powerpc405
I have u-boot up and now I want to load my netbsd kernel image.
According to u-boot readme, I need ppcbootI downloaded
ppcboot_stagefrom denx.de
I downloaded it in my root directory, when untarred it
I found that it needs refernce to some netbsd files libkern.Then I moved it the directory under netbsd source tree
:/home/src/nbsrc/sys/arch/evbppc/stand/ppcbootI ran make image under ppcboot/
this is the output I got.
Don;t understand why it is picking up i386-netbsdelf-gcc to compile.
I think it should pickup powerpc--netbsd-gccAm I missing any declaration ?
Quoted 9 lines
Is there any README for this stage-2 loader, explaining where to put this directory and what to set
up before compilation.making sure the sa library is up to date...
# compilesa/alloc.o
/home/src/nbsrc/obj/tooldir.NetBSD-2.0.2-i386/bin/i386--netbsdelf-gcc
Review
Quoted 3 lines
(quoted diff) +0
-2-g -Os -fomit-frame-pointer -ffixed-r14 -ffixed-r2 -fno-builtin -mcpu=860 -mstring -Werror
-I/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../../lib/libsa
Quoted 2 lines
-I../../.
-I/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../../arch
Quoted 1 line
-I/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../..
Review
Quoted 3 lines
(quoted diff) +0
-2-nostdinc -D_LKM -DPPC_INTR_IMPL="<powerpc/ibm4xx/ibm4xx_intr.h>"
-DPPC_PCI_MACHDEP_IMPL="<powerpc/ibm4xx/pci_machdep.h>"
Quoted 4 lines
(quoted diff) +0
-2-nostdinc -isystem /usr/include -DCOMPAT_UFS -D__INTERNAL_LIBSA_CREAD -nostdinc -isystem
/usr/include-c
/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/../../../../../lib/libsa/alloc.c
Quoted 2 lines
-o alloc.o.tmp
/home/src/nbsrc/obj/tooldir.NetBSD-2.0.2-i386/bin/i386--netbsdelf-gcc:
Quoted 6 lines
not found
*** Error code 127Stop.
make: stopped in
/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2/lib/sa
Quoted 5 lines
*** Error code 1
Stop.
make: stopped in
/home/src/nbsrc/sys/arch/evbppc/stand/ppcboot/ppcboot_stage2
Quoted 4 lines
Quoted 8 lines
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------------------------------------------------
Quoted 12 lines
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement *
http://www.sqe.com/bsce5sf
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Quoted 1 line
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[U-Boot-Users] stage-2 loader hangs
I don't know how to use ppcboot_stage2 loader. As I could not get it compiled in my environment. Not sure if I should use it or not.
I have netbsd Image with me for WALNUT board
I used :
mkimage -A ppc -O netbsd -T kernel -C gzip -a 0 -e 0 -n "MyNetbsd" -d netbsd-WALNUT.gz
Quoted 3 lines
loadb 400000
bootm 400000
## Booting image at 00400000 ...
Image Name: Netbsd Manju Created: 2005-09-06 21:17:01 UTC Image Type: PowerPC NetBSD Kernel Image (gzip
compressed)
Data Size: 2006672 Bytes = 1.9 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Transferring control to NetBSD stage-2 loader (at address 00000000) ...
it hangs here.
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
[U-Boot-Users] stage-2 loader hangs
Hi,
I have burned the FLASH for U-boot, I would like to debug the u-boot code. how can i do.
Thanks
----- Original Message -----
From: "manju mahajan" <[email protected]>
To: <[email protected]>
Sent: Thursday, September 08, 2005 4:01 AM
Subject: Re: [U-Boot-Users] stage-2 loader hangs
Quoted 37 lines
I don't know how to use
ppcboot_stage2loader. As I could not get it compiled in my environment. Not sure if I should use it or not.I have netbsd Image with me for WALNUT board
I used :
mkimage -A ppc -O netbsd -T kernel -C gzip -a 0 -e 0 -n "MyNetbsd" -d netbsd-WALNUT.gz
Quoted 3 lines
loadb 400000
bootm 400000
## Booting image at 00400000 ...
Image Name: Netbsd Manju Created: 2005-09-06 21:17:01 UTC Image Type: PowerPC NetBSD Kernel Image (gzipcompressed)
Data Size: 2006672 Bytes = 1.9 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Transferring control to NetBSD stage-2 loader (at address 00000000) ...it hangs here.
Quoted 8 lines
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle
Practices
Quoted 14 lines
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-usersSignature · 3 lines
No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: 9/7/2005
[U-Boot-Users] stage-2 loader hangs
Quoted 4 lines · In message <011401c5b433$ca758b80$0510a8c0@pvst6novr74bnd> you wrote:
I have burned the FLASH for U-boot,
I would like to debug the u-boot code.
how can i do.
Read the manual at http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot
Then attach your BDI2000 and start your GDB session.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de People are very flexible and learn to adjust to strange surroundings -- they can become accustomed to read Lisp and Fortran programs, for example. - Leon Sterling and Ehud Shapiro, Art of Prolog, MIT Press
[U-Boot-Users] stage-2 loader hangs
i have JTAG not BDI2000 is it possible ?
----- Original Message -----
From: "Wolfgang Denk" <[email protected]>
To: "Harshapvstus" <[email protected]>
Cc: "manju mahajan" <[email protected]>;
<[email protected]>
Sent: Thursday, September 08, 2005 2:32 PM
Subject: Re: [U-Boot-Users] stage-2 loader hangs
Quoted 6 lines
Quoted 4 lines · In message <011401c5b433$ca758b80$0510a8c0@pvst6novr74bnd> you wrote:
I have burned the FLASH for U-boot,
I would like to debug the u-boot code.
how can i do.
Quoted 19 lines
Read the manual at http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot
Then attach your BDI2000 and start your GDB session.
Best regards,
Wolfgang Denk
Signature · 10 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de People are very flexible and learn to adjust to strange surroundings -- they can become accustomed to read Lisp and Fortran programs, for example. - Leon Sterling and Ehud Shapiro, Art of Prolog, MIT Press ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle
Practices
Quoted 14 lines
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-usersSignature · 3 lines
No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: 9/7/2005
[U-Boot-Users] stage-2 loader hangs
In reply to HarshapvstusPlease don't contents in the subject...
was hoping I got some replies.....
Quoted 45 lines · --- Harshapvstus
Hi,
I have burned the FLASH for U-boot, I would like to debug the u-boot code. how can i do.
Thanks
----- Original Message -----
From: "manju mahajan" <[email protected]>
To: <[email protected]>
Sent: Thursday, September 08, 2005 4:01 AM
Subject: Re: [U-Boot-Users] stage-2 loader hangsQuoted 1 line
I don't know how to use
ppcboot_stage2loader. AsI
Quoted 1 line
could not get it compiled in my environment. Not
sure
Quoted 8 lines
if I should use it or not.
I have netbsd Image with me for WALNUT board
I used :
mkimage -A ppc -O netbsd -T kernel -C gzip -a 0 -e
0
Quoted 11 lines
-n "MyNetbsd" -d netbsd-WALNUT.gz
Quoted 3 lines
loadb 400000
bootm 400000
## Booting image at 00400000 ...
Image Name: Netbsd Manju Created: 2005-09-06 21:17:01 UTC Image Type: PowerPC NetBSD Kernel Image (gzipQuoted 7 lines
compressed)
Data Size: 2006672 Bytes = 1.9 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Transferring control to NetBSD stage-2 loader
Quoted 12 lines
(at
Quoted 10 lines
address 00000000) ...
it hangs here.
______________________________________________________
Quoted 7 lines
Quoted 1 line
Click here to donate to the Hurricane Katrina
relief effort.
Quoted 4 lines
-------------------------------------------------------
Quoted 14 lines
Quoted 1 line
SF.Net email is Sponsored by the Better Software
Conference & EXPO
Quoted 1 line
September 19-22, 2005 * San Francisco, CA *
Development Lifecycle
PracticesQuoted 1 line
Agile & Plan-Driven Development * Managing
Projects & Teams * Testing & QA
Quoted 1 line
Security * Process Improvement & Measurement *
Quoted 4 lines
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Quoted 13 lines
Quoted 6 lines
Signature · 4 lines
-- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.19/92 -Release Date: 9/7/2005
Quoted 2 lines
-------------------------------------------------------
Quoted 12 lines
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement *
http://www.sqe.com/bsce5sf
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Quoted 1 line
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
[U-Boot-Users] stage-2 loader hangs
Quoted 4 lines · In message <[email protected]> you wrote:
Please don't contents in the subject...
was hoping I got some replies.....--- Harshapvstus <[email protected]> wrote:
[Full quote deleted.]
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
A: No
Q: Should I leave quotes after my own reply?
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If you fail to plan, plan to fail.