Skip to contentSkip to conversation

libata fixes

PATCH In review Jeff Garzik 2 participants 4 messages Sep 9, 2005 – Sep 11, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libata fixes

Please pull from 'upstream' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

to obtain fixes for last-minute problems noticed in current build, following GregKH's PCI merge.

 drivers/scsi/sata_mv.c  |   16 ----------------
 drivers/scsi/sata_sis.c |   20 +++++++++++---------
 2 files changed, 11 insertions(+), 25 deletions(-)

commit 8add788574694c5aed04fcb281a5c999e40cd8f6

Author: Jeff Garzik <[email protected]>
Date:   Thu Sep 8 23:07:29 2005 -0400

[libata] minor fixes

* sata_mv: remove pci_intx(), now that the same function is in PCI core
* sata_sis: fix variable initialization bug, trim trailing whitespace

drivers/scsi/sata_mv.c +0 -16
@@ -699,22 +699,6 @@ static int mv_host_init(struct ata_probe
 	return rc;
 }
 
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_intx(struct pci_dev *pdev, int enable)
-{
-	u16 pci_command, new;
-
-	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-
-	if (enable)
-		new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
-	else
-		new = pci_command | PCI_COMMAND_INTX_DISABLE;
-
-	if (new != pci_command)
-		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-}
-
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
drivers/scsi/sata_sis.c +11 -9
@@ -55,7 +55,7 @@ enum {
 	SIS180_SATA1_OFS	= 0x10, /* offset from sata0->sata1 phy regs */
 	SIS182_SATA1_OFS	= 0x20, /* offset from sata0->sata1 phy regs */
 	SIS_PMR			= 0x90, /* port mapping register */
-	SIS_PMR_COMBINED	= 0x30, 
+	SIS_PMR_COMBINED	= 0x30,
 
 	/* random bits */
 	SIS_FLAG_CFGSCR		= (1 << 30), /* host flag: SCRs via PCI cfg */
@@ -147,11 +147,13 @@ static unsigned int get_scr_cfg_addr(uns
 {
 	unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
 
-	if (port_no) 
+	if (port_no)  {
 		if (device == 0x182)
 			addr += SIS182_SATA1_OFS;
 		else
 			addr += SIS180_SATA1_OFS;
+	}
+
 	return addr;
 }
 
@@ -166,10 +168,10 @@ static u32 sis_scr_cfg_read (struct ata_
 		return 0xffffffff;
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	
+
 	pci_read_config_dword(pdev, cfg_addr, &val);
 
-	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) 
+	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
 		pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
 
 	return val|val2;
@@ -185,7 +187,7 @@ static void sis_scr_cfg_write (struct at
 		return;
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	
+
 	pci_write_config_dword(pdev, cfg_addr, val);
 
 	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
@@ -195,7 +197,7 @@ static void sis_scr_cfg_write (struct at
 static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
-	u32 val,val2;
+	u32 val, val2 = 0;
 	u8 pmr;
 
 	if (sc_reg > SCR_CONTROL)
@@ -209,9 +211,9 @@ static u32 sis_scr_read (struct ata_port
 	val = inl(ap->ioaddr.scr_addr + (sc_reg * 4));
 
 	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
-		val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
+		val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
 
-	return val|val2;
+	return val | val2;
 }
 
 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
@@ -223,7 +225,7 @@ static void sis_scr_write (struct ata_po
 		return;
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	
+
 	if (ap->flags & SIS_FLAG_CFGSCR)
 		sis_scr_cfg_write(ap, sc_reg, val);
 	else {
#1 lore raw

Hello Jeff,

i have seen you have corrected a bug with a unused variable in sata_sis.c. one time.
But i have seen this problem 2 times.

my git data are not acually i have used.
git pull rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git git checkout -f upstream

may be it is already fixed.

drivers/scsi/sata_sis.c +0 -0
@@ -159,17 +161,17 @@ static u32 sis_scr_cfg_read (struct ata_
 {
        struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
        unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg,

pdev->device);
- u32 val, val2;

+       u32 val, val2 = 0;
        u8 pmr;

        if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
                return 0xffffffff;

        pci_read_config_byte(pdev, SIS_PMR, &pmr);
-
+
        pci_read_config_dword(pdev, cfg_addr, &val);
-       if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
+       if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
                pci_read_config_dword(pdev, cfg_addr+0x10, &val2);

        return val|val2;
Quoted 95 lines

Please pull from 'upstream' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

to obtain fixes for last-minute problems noticed in current build, following GregKH's PCI merge.

drivers/scsi/sata_mv.c  |   16 ----------------
drivers/scsi/sata_sis.c |   20 +++++++++++---------
2 files changed, 11 insertions(+), 25 deletions(-)
drivers/scsi/sata_sis.c +11 -10
@@ -55,7 +55,7 @@ enum {
 	SIS180_SATA1_OFS	= 0x10, /* offset from sata0->sata1 phy regs */
 	SIS182_SATA1_OFS	= 0x20, /* offset from sata0->sata1 phy regs */
 	SIS_PMR			= 0x90, /* port mapping register */
-	SIS_PMR_COMBINED	= 0x30, 
+	SIS_PMR_COMBINED	= 0x30,
 
 	/* random bits */
 	SIS_FLAG_CFGSCR		= (1 << 30), /* host flag: SCRs via PCI cfg */
@@ -147,11 +147,13 @@ static unsigned int get_scr_cfg_addr(uns
 {
 	unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
 
-	if (port_no) 
+	if (port_no)  {
 		if (device == 0x182)
 			addr += SIS182_SATA1_OFS;
 		else
 			addr += SIS180_SATA1_OFS;
+	}
+
 	return addr;
 }
 
@@ -166,10 +168,10 @@ static u32 sis_scr_cfg_read (struct ata_
 		return 0xffffffff;
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	
+
 	pci_read_config_dword(pdev, cfg_addr, &val);
 
-	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) 
+	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
 		pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
 
 	return val|val2;
@@ -185,7 +187,7 @@ static void sis_scr_cfg_write (struct at
 		return;
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	
+
 	pci_write_config_dword(pdev, cfg_addr, val);
 
 	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
@@ -195,7 +197,7 @@ static void sis_scr_cfg_write (struct at
 static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
-	u32 val,val2;
+	u32 val, val2 = 0;
 	u8 pmr;
 
 	if (sc_reg > SCR_CONTROL)
@@ -209,9 +211,9 @@ static u32 sis_scr_read (struct ata_port
 	val = inl(ap->ioaddr.scr_addr + (sc_reg * 4));
 
 	if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
-		val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
+		val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
 
-	return val|val2;
+	return val | val2;
 }
 
 static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
@@ -223,7 +225,7 @@ static void sis_scr_write (struct ata_po
 		return;
 
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	
+
 	if (ap->flags & SIS_FLAG_CFGSCR)
 		sis_scr_cfg_write(ap, sc_reg, val);
 	else {
-
#2 lore raw
Quoted 6 lines · Uwe Koziolek

Hello Jeff,

i have seen you have corrected a bug with a unused variable in sata_sis.c. one time.
But i have seen this problem 2 times.

Quoted 6 lines

my git data are not acually i have used.
git pull rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git git checkout -f upstream

may be it is already fixed.

Sorry, I cannot fully understand your email.

Please check 2.6.13-git9 from http://www.kernel.org/ and see if you feel further updates are needed. Everything relevant has been sent to Linus.

Jeff

#3 lore raw

patch for sata_sis.c

Hello Jeff,

There is an uninitialized variable issue in sata_sis.c, version 2.6.13-git10. Please check the patch.

Uwe Koziolek

drivers/scsi/sata_sis.c +1 -1
@@ -159,7 +159,7 @@ static u32 sis_scr_cfg_read (struct ata_
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
 	unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device);
-	u32 val, val2;
+	u32 val, val2 = 0;
 	u8 pmr;
 
 	if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */