eth1394 and sbp2 maintainers
Hi all,
the MAINTAINERS list of Linus' tree is still listing eth1394 and sbp2 as orphaned. This is certainly not correct for sbp2. Is it for eth1394?
Ben, I remember you wanted to have your contact added back in, at least for sbp2. In case this should not be true anymore, I'd volunteer for sbp2 maintenance.
Signature · 3 lines
Stefan Richter -=====-=-=-= =--= -=-=- http://arcgraph.de/sr/
Quoted 9 lines · On Sat, 10 Sep 2005 20:39:49 +0200 Stefan Richter wrote:
Hi all,
the
MAINTAINERSlist of Linus' tree is still listing eth1394 and sbp2 as orphaned. This is certainly not correct for sbp2. Is it for eth1394?Ben, I remember you wanted to have your contact added back in, at least for sbp2. In case this should not be true anymore, I'd volunteer for sbp2 maintenance.
Stefan,
I want to say that I think that you are doing a very commendable job on sbp2. Much thanks for your efforts.
---
~Randy
Quoted 4 lines · Randy.Dunlap
Stefan,
I want to say that I think that you are doing a very commendable job on sbp2. Much thanks for your efforts.
Let me add my voice to the choir here. I agree with Randy when he says that Stefan does a superb job supporting firewire with Linux.
Thank you very much, Rogério.
Signature · 3 lines
Rogério Brito : [email protected] : http://www.ime.usp.br/~rbrito Homepage of the algorithms package : http://algorithms.berlios.de Homepage on freshmeat: http://freshmeat.net/projects/algorithms/
Quoted 9 lines · Rogério Brito
Quoted 4 lines · Randy.Dunlap
Stefan,
I want to say that I think that you are doing a very commendable job on sbp2. Much thanks for your efforts.
Let me add my voice to the choir here. I agree with Randy when he says that Stefan does a superb job supporting firewire with Linux.
Then let me be the voice telling about the flip-side.
I've used Firewire with SBP2-driver for nearly 4 years and most of the time there was one problem or another (beginning from not-SMP-safe to "plainly not working" for nearly a year, where i had to downpatch Firewire (The nodemanager "desaster") for a very long time)
When the last problem crept up (sbp2-module couldn't be unloaded if only a none-HDD-device was connected) i was so feed up with the continuous hassle that i completly replaced my firewire hardware with USB2 Hardware.
With USB pluging/unplugging works flawlessly (couldn't say that for 4 years Firewire). Operating several devices concurrently works flawlessly (I was lucky when my 2 devices worked concurrently with Firewire. Most of the time only 1 device couldn't be connected without risking desaster), in constrast i've had 10 HDDs running concurrently connected via USB2 without a problem!
I know that i may have skipped the time where USB hasn't been mature to the time where USB was mature, but it got there. So forgive me when i'm too negative about firewire and too positive about USB.
To say it short:
- Firewire and especially SBP2 haven't been very mature in my 4 YEARS(!) using it.
- As far as i see the userbase just isn't big enough to make it mature.
Taking aside some niche usages, i guess firewire WILL DIE because of USB sooner then later. For me firewire died 6 month ago. Rest in peace.
Signature · 4 lines
Real Programmers consider "what you see is what you get" to be just as bad a concept in Text Editors as it is in women. No, the Real Programmer wants a "you asked for it, you got it" text editor -- complicated, cryptic, powerful, unforgiving, dangerous.
Quoted 5 lines · Matthias Schniedermeyer
Quoted 2 lines · Rogério Brito
Let me add my voice to the choir here. I agree with Randy when he says that Stefan does a superb job supporting firewire with Linux.
Then let me be the voice telling about the flip-side.
...or me, for that matter. :-) Firstly, maintenance is a different job than answering questions on linux1394-user or posting a few patches.
Quoted 4 lines
I've used Firewire with SBP2-driver for nearly 4 years and most of the time there was one problem or another (beginning from not-SMP-safe to "plainly not working" for nearly a year, where i had to downpatch Firewire (The nodemanager "desaster") for a very long time)
Sbp2 has been working very well under many Linux 2.4 releases. But there were some severe regressions under Linux 2.6.
Quoted 3 lines
When the last problem crept up (sbp2-module couldn't be unloaded if only a none-HDD-device was connected) i was so feed up with the continuous hassle that i completly replaced my firewire hardware with USB2 Hardware.
This very old problem of Linux 2.6 was recently fixed. But the fix is not yet available in any released kernel.
Quoted 6 lines
With USB pluging/unplugging works flawlessly (couldn't say that for 4 years Firewire). Operating several devices concurrently works flawlessly (I was lucky when my 2 devices worked concurrently with Firewire. Most of the time only 1 device couldn't be connected without risking desaster), in constrast i've had 10 HDDs running concurrently connected via USB2 without a problem!
The hotunplug bugs made usage of multiple devices difficult or even impossible, and they prevented implementation of some enhancements for usage of multiple devices on the same bus. Fortunately these bugs are out of the way now.
But besides that, there are still big issues with SCSI command aborts especially with soft RAID over sbp2 and with some firmwares, notably those with firmware-"R"AID-0. There is no prognosis yet if and when these more elusive problems will be sorted out.
Quoted 3 lines
I know that i may have skipped the time where USB hasn't been mature to the time where USB was mature, but it got there. So forgive me when i'm too negative about firewire and too positive about USB.
On the other hand, there have also been positive reports about usage of multiple SBP-2 devices. (I have several too, though mostly quality brands...) But you are absolutely right that sbp2 has not been reliable for a long time, and still isn't quite there.
Quoted 4 lines
To say it short:
- Firewire and especially SBP2 haven't been very mature in my 4 YEARS(!) using it.
- As far as i see the userbase just isn't big enough to make it mature.
Yes, there is a smaller user base than for usb-storage. Combine this with the complexities of IEEE 1394 and SCSI and of their respective Linux implementations, plus near absence of any commercial interest in SBP-2 support for Linux. All this contributes to lack of manpower in development and lack of maintenance routine, IMO.
Quoted 2 lines
Taking aside some niche usages, i guess firewire WILL DIE because of USB sooner then later. For me firewire died 6 month ago. Rest in peace.
FireWire won't die because of USB. There are fields of applications which FireWire and USB do not share. Sure, FireWire for _storage_ applications will definitively lose more of its already weak market share to USB (cheap and slow) and to external SATA (cheap and fast). But FireWire won't vanish from storage applications completely, thanks to a few unique features like multiple initiator capability, the ability to power even 5.25" drives by bus power, or choice of special-purpose cable or fiber media.
Signature · 3 lines
Stefan Richter -=====-=-=-= =--= -==-- http://arcgraph.de/sr/
Quoted 4 lines · Stefan Richter
Hi all,
the
MAINTAINERSlist of Linus' tree is still listing eth1394 and sbp2 as orphaned. This is certainly not correct for sbp2. Is it for eth1394?
eth1394: I emailed Steve Kinneberg, the last person to do any serious work on the driver, before I made this change, and he's OK with that. If someone else wants to take it, I suggest they submit a patch.
Quoted 3 lines
Ben, I remember you wanted to have your contact added back in, at least for sbp2. In case this should not be true anymore, I'd volunteer for sbp2 maintenance.
Ben is currently listed for ieee1394, ohci1394, and raw1394. Someone should take sbp2 now that it's being worked on actively again, but I'll leave that up to you two.
Cheers,
Jody
Quoted 4 lines
Signature · 3 lines
Stefan Richter -=====-=-=-= =--= -=-=- http://arcgraph.de/sr/
Quoted 8 lines · Stefan Richter
Hi all,
the
MAINTAINERSlist of Linus' tree is still listing eth1394 and sbp2 as orphaned. This is certainly not correct for sbp2. Is it for eth1394?Ben, I remember you wanted to have your contact added back in, at least for sbp2. In case this should not be true anymore, I'd volunteer for sbp2 maintenance.
Yeah, I sent a patch to Linus, but I guess it never got added. Stefan, feel free to send a patch adding you as the maintainer if you want, Cc me.
Thansk
Signature · 4 lines
Ubuntu - http://www.ubuntu.com/ Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ SwissDisk - http://www.swissdisk.com/