Volanomark regress on ia64
Take a look at http://kernel-perf.sourceforge.net/results.machine_id=26.html
First chart with volanomark benchmark. It took ~ 11% performance regression on 2.6.13-git9 and 2.6.14-rc1.
It is not those two particular kernel version have the problem per se. It would've shown on 2.6.13-rc1 when default hz rate was switched to 250. Last week, I happened to audit the system and made the hz switch and the problem showed up.
Hz=1000 cpu idle is about 54%, the raw throughput is 74935 msgs/sec
Hz=250 cpu idle is about 58%, the raw throughput is 67246 msgs/sec
I think it has something to do with the scheduler load balance. While I'm looking into schedstat and etc. Posting here for everyone to pour over the issue.
vmstat/readprofle/schedstat result with 1K hz and 250 hz attached.
- Ken
Quoted 10 lines · Kenneth W
Take a look at http://kernel-perf.sourceforge.net/results.machine_id&.html
First chart with volanomark benchmark. It took ~ 11% performance regression on 2.6.13-git9 and 2.6.14-rc1.
It is not those two particular kernel version have the problem per se. It would've shown on 2.6.13-rc1 when default hz rate was switched to 250. Last week, I happened to audit the system and made the hz switch and the problem showed up.
Quoted 9 lines
Hz00 cpu idle is about 54%, the raw throughput is 74935 msgs/sec
Hz%0 cpu idle is about 58%, the raw throughput is 67246 msgs/secI think it has something to do with the scheduler load balance. While I'm looking into schedstat and etc. Posting here for everyone to pour over the issue.
vmstat/readprofle/schedstat result with 1K hz and 250 hz attached.
Hi Ken,
Made any progress yet?
It looks like the problem is confined to ia64? Are the x86-64 machines also running with HZ set to 250?
I would look at differences between SD_CPU_INIT for ia64 versus the generic definition. cache_hot_time and cache_nice_tries by the looks, both those could cause increased idle time.
Nick
Signature · 3 lines
SUSE Labs, Novell Inc. Send instant messages to your online friends http://au.messenger.yahoo.com
I am also seeing a degradation of 16% @48p and 9% @32p for my favorite AIM7 workload on ia64 (SGI SN/Altix) between 2.6.13-rc6 and 2.6.14-rc1. I haven't peeked beneath the covers to analyze why it's happening. I've still been gathering performance numbers.
John Hawkes
Nick Piggin wrote on Sunday, September 18, 2005 3:57 AM
Quoted 2 lines
It looks like the problem is confined to ia64? Are the x86-64 machines also running with HZ set to 250?
Yes, it appears to be confined to ia64. X86-64 machines are running at 250 Hz and there is no perf. regression there.
Quoted 3 lines
I would look at differences between
SD_CPU_INITfor ia64 versus the generic definition.cache_hot_timeandcache_nice_triesby the looks, both those could cause increased idle time.
Thanks for the suggestion. My first experiment was in those area as well, in particular changing newidle_idx and idle_idx. I have not yet come up any concrete resolution.
- Ken