Minor problem in nfsv3 write
Subsystems (2)
There is a minor bug in the way writes are handled in nfs3. If the client requests a write for more than 32k of data the server will only write 32k but report that it wrote the whole amount.
This happens when nfs3svc_decode_writeargs caps the amount that can be written to NFSSVC_MAXBLKSIZE (which is 32k), by limiting the amount that it copies into the args object (fs/nfsd/nfs3xdr.c:375). The amount that is reported to the client is copied from the request packet, which is the amount the client requested (fs/nfsd/nfs3proc.c:209) not the amount which was written.
I think the right thing to do is adjust the amount in the request object to the amount that will be written in the decoder.
Following is an modified version of nfs3svc_decode_writeargs and diffs against a 2.6.13 kernel which does this.
--Steven
int
nfs3svc_decode_writeargs(struct svc_rqst *rqstp, u32 *p,
struct nfsd3_writeargs *args)
{
unsigned int len, v, hdr;
if (!(p = decode_fh(p, &args->fh))
|| !(p = xdr_decode_hyper(p, &args->offset)))
return 0;
args->count = ntohl(*p++);
args->stable = ntohl(*p++);
len = args->len = ntohl(*p++);
hdr = (void*)p - rqstp->rq_arg.head[0].iov_base;
if (rqstp->rq_arg.len < len + hdr)
return 0;
args->vec[0].iov_base = (void*)p;
args->vec[0].iov_len = rqstp->rq_arg.head[0].iov_len - hdr;
if (len > NFSSVC_MAXBLKSIZE) {
len = NFSSVC_MAXBLKSIZE;
/* adjust count to match the amount that will be written */
args->count = len;
}
v= 0;
while (len > args->vec[v].iov_len) {
len -= args->vec[v].iov_len;
v++;
args->vec[v].iov_base = page_address(rqstp->rq_argpages[v]);
args->vec[v].iov_len = PAGE_SIZE;
}
args->vec[v].iov_len = len;
args->vlen = v+1;
/* args->count may be less than args->len since it is capped */
return args->count <= args->len && args->vec[0].iov_len > 0;
}*** fs/nfsd/nfs3xdr.c.orig Fri Sep 16 18:02:12 2005
--- fs/nfsd/nfs3xdr.c Mon Sep 19 17:35:22 2005
***************
*** 372,379 ****
args->vec[0].iov_base = (void*)p; args->vec[0].iov_len = rqstp->rq_arg.head[0].iov_len - hdr;
! if (len > NFSSVC_MAXBLKSIZE)
len = NFSSVC_MAXBLKSIZE;
v= 0;
while (len > args->vec[v].iov_len) {
len -= args->vec[v].iov_len;
--- 372,382 ----
args->vec[0].iov_base = (void*)p; args->vec[0].iov_len = rqstp->rq_arg.head[0].iov_len - hdr;
! if (len > NFSSVC_MAXBLKSIZE) {
len = NFSSVC_MAXBLKSIZE;
+ /* adjust count to match the amount that will be written */
+ args->count = len;
+ }
v= 0;
while (len > args->vec[v].iov_len) {
len -= args->vec[v].iov_len;
***************
*** 384,390 ****
args->vec[v].iov_len = len;
args->vlen = v+1;
! return args->count == args->len && args->vec[0].iov_len > 0;
}
int
--- 387,394 ----
args->vec[v].iov_len = len;
args->vlen = v+1;
! /* args->count may be less than args->len since it is capped */
! return args->count <= args->len && args->vec[0].iov_len > 0;
}
int
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 4 lines · Steven
There is a minor bug in the way writes are handled in nfs3. If the client requests a write for more than 32k of data the server will only write 32k but report that it wrote the whole amount.
Our server also reports 32k as the maximum write size. So the bug is on the client side here, isn't it?
--b.
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 12 lines · J. Bruce Fields
Quoted 5 lines · Steven
There is a minor bug in the way writes are handled in nfs3. If the client requests a write for more than 32k of data the server will only write 32k but report that it wrote the whole amount.
Our server also reports 32k as the maximum write size. So the bug is on the client side here, isn't it?
This would be a bug in the client, but if the server is going to attempt to write some of the data anyway, then it should correctly report the number of bytes written. Otherwise, the server should reject the entire request.
Thanx...
ps
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 4 lines
This would be a bug in the client, but if the server is going to attempt to write some of the data anyway, then it should correctly report the number of bytes written. Otherwise, the server should reject the entire request.
I agree. I don't think it is a good policy to tell the client that all of the data was written when some was not.
For what it's worth, the RFC says that if the write size exceeds wtmax then the server may write only wtmax bytes of the request.
--Steven
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 5 lines · Steven
I agree. I don't think it is a good policy to tell the client that all of the data was written when some was not.
For what it's worth, the RFC says that if the write size exceeds wtmax then the server may write only wtmax bytes of the request.
OK. Could you regenerate that patch with diff -up? (See Documentation/SubmittingPatches.) Don't bother sending the modified function, it's the patch that people want.
--b.
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
PATCH 1/1 Minor problem in nfsv3 write
The following changes the nfs write procedure so that it reports the number of bytes written correctly when the requested write size execeeds the server's maximum write transfer size. The server was reporting that it wrote the number of bytes the client requested, but in fact it only wrote the max transfer size.
For linux-2.6.13.2.
--Steven Procter
nfsd/nfs3xdr.c renamed from nfsd/nfs3xdr.c.orig +4 -2
@@ -372,8 +372,10 @@ nfs3svc_decode_writeargs(struct svc_rqst args->vec[0 ].iov_base = (void *)p; args->vec[0 ].iov_len = rqstp->rq_arg.head[0 ].iov_len - hdr; -if (len >NFSSVC_MAXBLKSIZE ) +if (len >NFSSVC_MAXBLKSIZE ) { len =NFSSVC_MAXBLKSIZE ; + args->count = len; + } v=0 ;while (len > args->vec[v].iov_len) { len -= args->vec[v].iov_len;
@@ -384,7 +386,7 @@ nfs3svc_decode_writeargs(struct svc_rqst args->vec[v].iov_len = len; args->vlen = v+1 ; -return args->count == args->len && args->vec[0 ].iov_len >0 ; +return args->count <= args->len && args->vec[0 ].iov_len >0 ; }int
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Quoted 10 lines · Steven
The following changes the nfs write procedure so that it reports the number of bytes written correctly when the requested write size execeeds the server's maximum write transfer size. The server was reporting that it wrote the number of bytes the client requested, but in fact it only wrote the max transfer size.
For linux-2.6.13.2.
--Steven Procter
Thanks. For next time; note that these should apply with -p1, so should have another pathname component at the beginning:
nfsd/nfs3xdr.c
Quoted 2 lines
nfsd/nfs3xdr.c renamed from nfsd/nfs3xdr.c.orig +0
-0
Again, this is in Documentation/SubmittingPatches.
(We all have scripts to automate the process, which are happier if everyone follows the same conventions.)
--b.
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs