Bug fix in P6 Machine check initialization
PATCH 1/1 Bug fix in P6 Machine check initialization
Make P6 MCA initialization code complaint with guidelines in
IA-32 SDM Vol3. Bank 0 control register should not be set by OS and clear status registers on all banks on reset.
This will preven false MCE alarms on the systems that has some non-MCE information left-over in MC0_STATUS on reboot.
Signed-off-by Venkatesh Pallipadi <[email protected]>
arch/i386/kernel/cpu/mcheck/p6.c +8 -3
@@ -103,11 +103,16 @@wrmsr (MSR_IA32_MCG_CTL ,0xffffffff ,0xffffffff ); nr_mce_banks = l &0xff ; -/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */ -for (i=1 ; i<nr_mce_banks; i++) { +/* +* Following the example in IA-32 SDM Vol 3: +* - MC0_CTL should not be written +* - Status registers on all banks should be cleared on reset +*/ +for (i=1 ; i<nr_mce_banks; i++)wrmsr (MSR_IA32_MC0_CTL +4 *i,0xffffffff ,0xffffffff ); + +for (i=0 ; i<nr_mce_banks; i++)wrmsr (MSR_IA32_MC0_STATUS +4 *i,0x0 ,0x0 ); - }set_in_cr4 (X86_CR4_MCE ); printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",