dbau1550 patch
A while back (Sep 23, 2004) someone named Leif posted a note about a patch to add support for the AMD DbAU1550 board to u-boot here
https://sourceforge.net/mailarchive/forum.php?thread_id=5624545&forum_id=12898
I can't seem to find the patch he referred to and I would like to get a hold of it.
Signature · 2 lines
Hardware, n.:
The parts of a computer system that can be kicked.Quoted 3 lines · Andrew Dyer
A while back (Sep 23, 2004) someone named Leif posted a note about a patch to add support for the AMD DbAU1550 board to u-boot here
https://sourceforge.net/mailarchive/forum.php?thread_id=5624545&forum_id=12898
That would be me.
Quoted 2 lines
I can't seem to find the patch he referred to and I would like to get a hold of it.
Will send this to you privately, and later try to clean it up a bit and fix a few bugs this caused with the db1000 board, so Wolfgang might accept it into the CVS.
regards
/ Leif
Quoted 8 lines · Leif Lindholm
Quoted 3 lines · Andrew Dyer
A while back (Sep 23, 2004) someone named Leif posted a note about a patch to add support for the AMD DbAU1550 board to u-boot here
https://sourceforge.net/mailarchive/forum.php?thread_id=5624545&forum_id=12898Will send this to you privately, and later try to clean it up a bit and fix a few bugs this caused with the db1000 board, so Wolfgang might accept it into the CVS.
I've been working with your patch and expanding it a bit for stuff we wanted to use on our custom au1550 boards.
I noticed a problem with the cpu/mips/au1x00_ether.c net driver - it certainly causes problems for me on the au1550.
next_tx and next_rx are set to zero in the init routine - the au1550 docs (section 9.4.3.2 of au1550 databook) says the dmas may not start at buffer 0 coming out of reset, so those values are not guaranteed to be zero. The correct value can be init'd based on the dma address register CB field.
I changed the lines setting these up in au1x00_init() to:
next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr);
next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);this issue was causing me problems with rx and tx timeouts, and changing these values fixes my problem (at least in limited testing). Can someone else try out this change on au1000/1100/1500 based systems?
Also, what is txbuf in au1x00_ether.c used for? It doesn't look like that storage ever gets used - every time through the au1x00_send routine the buffer gets passed in from the net code.
Signature · 2 lines
Hardware, n.:
The parts of a computer system that can be kicked.Quoted 8 lines · Andrew Dyer
Quoted 3 lines · Leif Lindholm
Will send this to you privately, and later try to clean it up a bit and fix a few bugs this caused with the db1000 board, so Wolfgang might accept it into the CVS.
I changed the lines setting these up in
au1x00_init()to:
Quoted 7 lines
next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr); next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);this issue was causing me problems with rx and tx timeouts, and changing these values fixes my problem (at least in limited testing). Can someone else try out this change on au1000/1100/1500 based systems?
This seems to clear up a similar/identical problem we had on our hardware, but haven't had time to investigate. Good work, thanks!
I'm attaching a patch against CVS (last synced on the 10:th of December, since the sourceforge server seems to be down as usual - but I don't think that file has been modified) for others testing on other boards/chips, since I only have 1550 hardware here.
/
Leif
-------------- next part --------------
A non-text attachment was scrubbed...
Name: au1x00_eth.c.diff
Type: text/x-patch
Size: 568 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20041229/2533a9e8/attachment.bin
Quoted 2 lines · Leif Lindholm
I'm attaching a patch against CVS (last synced on the 10:th of December, since the sourceforge server seems to be down as usual - but I don't
My sincerest apologies to any sourceforge people out there - it seems our BOFH got a bit trigger happy during the holidays and tightened up the firewall rules a bit :]
Updated u-boot tree just now, and as I suspected there were no updates to the file since last sync.
Sorry about the line noise.
/
Leif
The patch seems to work fine on au1000 also.
/Thomas
Leif Lindholm wrote:
<...>
Quoted 4 lines
I'm attaching a patch against CVS (last synced on the 10:th of December, since the sourceforge server seems to be down as usual - but I don't think that file has been modified) for others testing on other boards/chips, since I only have 1550 hardware here.
<...>
Quoted 11 lines · In message <1104317088.1002.19.camel@localhost> you wrote:
Quoted 10 lines
I changed the lines setting these up in
au1x00_init()to:next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr); next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);this issue was causing me problems with rx and tx timeouts, and changing these values fixes my problem (at least in limited testing). Can someone else try out this change on au1000/1100/1500 based systems?
Quoted 7 lines
This seems to clear up a similar/identical problem we had on our hardware, but haven't had time to investigate. Good work, thanks!
I'm attaching a patch against CVS (last synced on the 10:th of December, since the sourceforge server seems to be down as usual - but I don't think that file has been modified) for others testing on other boards/chips, since I only have 1550 hardware here.
Added, thanks. But please don't forget to provide a CHANGELOG entry!
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Of all possible committee reactions to any given agenda item, the reaction that will occur is the one which will liberate the greatest amount of hot air. -- Thomas L. Martin