Skip to contentSkip to conversation

When L3 is present show its size in /proc/cpuinfo

PATCH In review Venkatesh Pallipadi 2 participants 2 messages Sep 26, 2005

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 When L3 is present show its size in /proc/cpuinfo

The code that prints the cache size assumes that L3 always lives in chipset and is shared across CPUs. Which is not really true.

I think all the cachesizes reported by cpuid are in the processor itself. The attached patch changes the code to reflect that.

Dave, any idea where that original comment in the code came from? Are there any systems which reports the L3 cache size in cpuid, when L3 sits in northbridge?

Thanks,
Venki

arch/i386/kernel/cpu/intel_cacheinfo.c +1 -7
Index: linux-2.6.12/arch/i386/kernel/cpu/intel_cacheinfo.c
===================================================================
@@ -284,13 +284,7 @@
 		if ( l3 )
 			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
 
-		/*
-		 * This assumes the L3 cache is shared; it typically lives in
-		 * the northbridge.  The L1 caches are included by the L2
-		 * cache, and so should not be included for the purpose of
-		 * SMP switching weights.
-		 */
-		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+		c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
 	}
 
 	return l2;
#1 lore raw
Quoted 7 lines · Venkatesh Pallipadi

The code that prints the cache size assumes that L3 always lives in chipset and is shared across CPUs. Which is not really true.

I think all the cachesizes reported by cpuid are in the processor itself. The attached patch changes the code to reflect that.

Dave, any idea where that original comment in the code came from?

Been there for a long time iirc (Though I've not checked [my kingdom for a 'git annotate' tool])

Quoted 2 lines

Are there any
systems which reports the L3 cache size in cpuid, when L3 sits in northbridge?

Very unlikely.
The only legacy system with L3 that I recall was the AMD K6-III (which had on-CPU L1/L2, though some motherboards at the time also included an L3 (or L2 if used with an earlier socket 7 cpu). None of those off-cpu caches were detectable with cpuid, and required reading from pci config space to determine their size/status etc.

The big question I have though is how relevant that 'weighting' is today if we factor in L3.

Dave