Skip to contentSkip to conversation

hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle

PATCH In review Marko Kreen 2 participants 6 messages Sep 28, 2005 – Oct 2, 2005 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hci_usb: add entry for FMWBA-101 Bluetooth usb-dongle

This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth USB Adapter.

/proc/bus/usb/devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=250mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
drivers/bluetooth/hci_usb.c +3 -0
Index: linux-2.6/drivers/bluetooth/hci_usb.c
===================================================================
@@ -92,6 +92,9 @@ static struct usb_device_id bluetooth_id
 	/* Ericsson with non-standard id */
 	{ USB_DEVICE(0x0bdb, 0x1002) },
 
+	/* Fujitsu-Siemens FMWBA-101 (ALPS?) */
+	{ USB_DEVICE(0x0bf8, 0x1003) },
+
 	{ }	/* Terminating entry */
 };
 

-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

maintainer
#1 lore raw

Hi Marko,

Quoted 10 lines

This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth USB Adapter.

/proc/bus/usb/devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB

this is not needed, because the USB class is enough.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#2 lore raw
Quoted 11 lines · Marcel Holtmann
Quoted 9 lines

This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth USB Adapter.

/proc/bus/usb/devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB

this is not needed, because the USB class is enough.

But it is not, the device won't be detected without this patch.

# uname -r
2.6.13.2
# modprobe hci_usb
# hciconfig -a
# rmmod hci_usb
# modprobe hci_usb_fix
# hciconfig -a
hci0:   Type: USB
        BD Address: 00:02:C7:42:6A:F2 ACL MTU: 192:8 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:111 acl:0 sco:0 events:14 errors:0
        TX bytes:310 acl:0 sco:0 commands:14 errors:0
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'grue-0'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x150 LMP Ver: 1.1 (0x1) LMP Subver: 0x150
        Manufacturer: Cambridge Silicon Radio (10)
Signature · 12 lines
marko



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
maintainer
#3 lore raw

Hi Marko,

Quoted 10 lines
Quoted 10 lines
Quoted 9 lines

This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth USB Adapter.

/proc/bus/usb/devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB
Quoted 3 lines
Quoted 1 line

this is not needed, because the USB class is enough.

But it is not, the device won't be detected without this patch.

it must work without the patch. Otherwise there is something else broken on your side. Try the latest 2.6.14-rc2 kernel.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#4 lore raw
Quoted 10 lines · Marcel Holtmann
Quoted 10 lines
Quoted 10 lines
Quoted 9 lines

This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth USB Adapter.

/proc/bus/usb/devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB
Quoted 6 lines
Quoted 3 lines
Quoted 1 line

this is not needed, because the USB class is enough.

But it is not, the device won't be detected without this patch.

it must work without the patch. Otherwise there is something else broken on your side. Try the latest 2.6.14-rc2 kernel.

Now I tried with 2.6.14-rc2. On another machine, as I cant reboot the first one at will. Same result - without the patch hciconfig shows nothing.

Signature · 12 lines
marko



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
maintainer
#5 lore raw

Hi Marko,

Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Quoted 11 lines
Quoted 9 lines

This patch adds ID's for Fujitsu-Siemens FMWBA-101 Bluetooth USB Adapter.

/proc/bus/usb/devices:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=0e(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0bf8 ProdID=1003 Rev= 3.36
S:  Manufacturer=ALPS
S:  Product=BT USB

this is not needed, because the USB class is enough.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

But it is not, the device won't be detected without this patch.

it must work without the patch. Otherwise there is something else broken on your side. Try the latest 2.6.14-rc2 kernel.

Now I tried with 2.6.14-rc2. On another machine, as I cant reboot the first one at will. Same result - without the patch hciconfig shows nothing.

then your hotplug is broken. Fix it or send me the dongle, because none of these dongles need to be listed.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel