class 1 bluetooth 1.2 dongles with CSR chipset?
Hi!
I just bought an Anubis Typhoon Bluetooth V1.2 USB adapter, which according to the product page http://www.typhoon.de/en/art.php?p=838
should have "Main chip - CSR BlueCore", but in reality it is a Broadcom BCM2035 :-/
It seems to work without problems and without needing to load firmware, but I'm a little disappointed because I searched a long time trying to find a bluetooth 1.2 class 1 device with CSR chipset.
Aren't there any manufacturers today who sell CSR based USB dongles?
I'm tempted to return it to the store, but what to buy instead?
Thomas
Signature · 12 lines
Email: [email protected] http://intevation.de/~thomas/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Thomas,
Quoted 5 lines
I just bought an Anubis Typhoon Bluetooth V1.2 USB adapter, which according to the product page http://www.typhoon.de/en/art.php?p=838
should have "Main chip - CSR BlueCore", but in reality it is a Broadcom BCM2035 :-/
Quoted 7 lines
It seems to work without problems and without needing to load firmware, but I'm a little disappointed because I searched a long time trying to find a bluetooth 1.2 class 1 device with CSR chipset.
Aren't there any manufacturers today who sell CSR based USB dongles?
I'm tempted to return it to the store, but what to buy instead?
try to get a Cellink BlueCore4 based dongle with EDR support.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Quoted 9 lines · Marcel Holtmann
Quoted 7 lines
I just bought an Anubis Typhoon Bluetooth V1.2 USB adapter, which according to the product page http://www.typhoon.de/en/art.php?p=838
should have "Main chip - CSR BlueCore", but in reality it is a Broadcom BCM2035 :-/Aren't there any manufacturers today who sell CSR based USB dongles? I'm tempted to return it to the store, but what to buy instead?
try to get a Cellink BlueCore4 based dongle with EDR support.
Just ordered two from misterbluetooth.com in Berlin for 25€ each.
Their web shop is broken, but some minutes after sending the order via email they phoned me back that they will send it tomorrow and that I don't have to pay in advance.
Would the Typhoon Dongle be helpful for you?
Thomas
Signature · 12 lines
Email: [email protected] http://intevation.de/~thomas/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Thomas,
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I just bought an Anubis Typhoon Bluetooth V1.2 USB adapter, which according to the product page http://www.typhoon.de/en/art.php?p=3D=
838
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
should have "Main chip - CSR BlueCore", but in reality it is a Broadcom BCM2035 :-/
=20
Aren't there any manufacturers today who sell CSR based USB dongles=
?
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
I'm tempted to return it to the store, but what to buy instead?
=20
try to get a Cellink BlueCore4 based dongle with EDR support.=20
Just ordered two from misterbluetooth.com in Berlin for 25=E2=82=AC eac=
h.
Quoted 6 lines
=20
Their web shop is broken, but some minutes after sending the order via email they phoned me back that they will send it tomorrow and that I don't have to pay in advance.
=20
Would the Typhoon Dongle be helpful for you?
if you don't need anymore, of course.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Quoted 1 line · Marcel Holtmann
try to get a Cellink BlueCore4 based dongle with EDR support.
The two Cellink BTA6030 arrived today, here the output of hciconfig hci1 features version revision:
hci1: Type: USB
BD Address: 00:0A:94:xx:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <power control> <transparent SCO> <broadcast encrypt> <EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> <interlaced iscan> <interlaced pscan> <inquiry with RSSI> <extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> <AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> <AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> <EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features>
HCI Ver: 1.1 (0x1) HCI Rev: 0x5dc LMP Ver: 1.1 (0x1) LMP Subver: 0x5dc
Manufacturer: Cambridge Silicon Radio (10)
Build 1500
Chip version: BlueCore4-External
Max key size: 56 bit
SCO mapping: HCI
The version numbers look strange.
Unfortunately the dongles only support 56bit encryption.
Thomas
Signature · 12 lines
Email: [email protected] http://intevation.de/~thomas/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Thomas,
Quoted 26 lines
Quoted 1 line
try to get a Cellink BlueCore4 based dongle with EDR support.
The two Cellink BTA6030 arrived today, here the output of hciconfig hci1 features version revision:
hci1: Type: USB
BD Address: 00:0A:94:xx:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
Features:0xff0xff0x8f0xfe0x9b0xf90x000x80
<3-slot packets> <5-slot packets> <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <power control> <transparent SCO> <broadcast encrypt> <EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> <interlaced iscan> <interlaced pscan> <inquiry with RSSI> <extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> <AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> <AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> <EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features>
HCI Ver: 1.1 (0x1) HCI Rev:0x5dcLMP Ver: 1.1 (0x1) LMP Subver:0x5dc
Manufacturer: Cambridge Silicon Radio (10)
Build 1500
Chip version: BlueCore4-External
Max key size: 56 bit
SCO mapping: HCI
Quoted 1 line
The version numbers look strange.
the version numbers can be corrected with the pskey tool. Check version and remver PS keys.
Quoted 1 line
Unfortunately the dongles only support 56bit encryption.
You can flash a 128-bit firmware into it, but currently no such firmware is not available in the public.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Dear Linux Bluetooth users,
I've bought an AVM Bluefritz! V2.0 dongle because AVM has a page that says that this dongle works with Linux. This may be true for wireless ISDN/DSL but not for headsets/8khz duplex audio connections. After pairing I'm stuck.
Well, I've checked the CSR partners page but I haven't found any interesting vendor there.
I've found some well known like MSI or Samsung but none of them reaches the quality of AVM ( including 5 year warranty). MSI sells graphics cards with wrong firmware, mainboards with disabled USB-Ports and Samsung device always fail ( DVD drive, HDD, DV camera). I don't trust them.
And of course I like hardware that runs with open source drivers that don't require any firmware files. E.g. I've bought a Twinhan DVB card instead of a Avermedia 771. It's all about diversity and choice ;)
snd-bt-sco isn't compatible with Bluefritz but maybe there's someone in this world who can develop another driver module. I just wonder how this was done the Windows way ( I don't have Windows). I'm just a poor apprentice and I know it isn't very attractive if I donate 50€ but I can't give more support :-(
Thanks for reading
Schugy
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Now I've bought an Epox BT-DG 03 dongle and it works fine. But I would like to use the bluefritz!2.0 dongle too. Schugy
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users