Skip to contentSkip to conversation

about FC3 2.6.10 ..........

DISCUSSION umesh chandak 3 participants 3 messages Oct 6, 2005

lore
Share & tools
lore
#0 lore raw

Hi,
I have compiled a 2.6.10 on FC3.It
compiled successfully .But When i boot to this option ,it gives me warning
Warning: unable to open an initial console
I know this is due to something genromfs . I also read about romfs in documentation .
In my .config file romfs type is y (built in ).

What should i do ?
Waiting for reply .
Thanks in advance .

__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com

#1 lore raw
Quoted 7 lines · umesh chandak

Hi,
I have compiled a 2.6.10 on FC3.It
compiled successfully .But When i boot to this option ,it gives me warning
Warning: unable to open an initial console
I know this is due to something genromfs . I also read about romfs in documentation .

(Not a kernel question - next time, ask on one of the Fedora lists at redhat.com)

Getting FC3 to run on on a romfs based system will be a challenge. In any case, romfs has approximately zero to do with your problem.

What you've almost certainly done is forgotten to do a proper 'mkinitrd' - FC3 and later need an initrd to get going in most cases. (Specifically, your initrd image needs to have a /dev/console entry in the /dev on the initrd filesystem, and you don't have one).

#2 lore raw

[email protected] napsal(a):

Quoted 13 lines · umesh chandak
Quoted 11 lines

Hi,
I have compiled a 2.6.10 on FC3.It
compiled successfully .But When i boot to this option ,it gives me warning
Warning: unable to open an initial console
I know this is due to something genromfs . I also read about romfs in documentation .

Quoted 10 lines

(Not a kernel question - next time, ask on one of the Fedora lists at redhat.com)

Getting FC3 to run on on a romfs based system will be a challenge. In any case, romfs has approximately zero to do with your problem.

What you've almost certainly done is forgotten to do a proper 'mkinitrd' - FC3 and later need an initrd to get going in most cases. (Specifically, your initrd image needs to have a /dev/console entry in the /dev on the

Yes, but I really don't know how many times we should tell him this, unless he understands it, grr.
[Your post is at least the third reply to this question :(].

Signature · 3 lines
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      [email protected]      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10