Skip to contentSkip to conversation

2.6.14-rc4-rt6, skge vs. sk98lin

DISCUSSION Fernando Lopez-Lezcano 5 participants 6 messages Oct 18, 2005 – Oct 19, 2005

lore
Share & tools
lore
#0 lore raw

I'm running 2.6.14-rc4-rt6 and trying the skge driver instead of the sk98lin and I'm getting these warnings in my logs (this is probably not related to the rt patch):

network driver disabled interrupts: skge_xmit_frame+0x0/0x320 [skge]

No other relevant messages around that I can see. Is this a bug? Any information I could supply to help debug it?

-- Fernando

#1 lore raw
Quoted 8 lines · Fernando Lopez-Lezcano

I'm running 2.6.14-rc4-rt6 and trying the skge driver instead of the sk98lin and I'm getting these warnings in my logs (this is probably not related to the rt patch):

network driver disabled interrupts: skge_xmit_frame+0x0/0x320 [skge]

No other relevant messages around that I can see. Is this a bug? Any information I could supply to help debug it?

This is a bogus message added by the -rt patch. It is not a bug.

The trylock scheme in some newer net drivers (grep for NETDEV_TX_LOCKED) uses local_irq_save/restore because there is no spin_trylock_irqsave/spin_trylock_failed_irqrestore API.

Jeff

#2 lore raw
Quoted 7 lines · Jeff Garzik
Quoted 6 lines · Fernando Lopez-Lezcano

I'm running 2.6.14-rc4-rt6 and trying the skge driver instead of the sk98lin and I'm getting these warnings in my logs (this is probably not related to the rt patch):

network driver disabled interrupts: skge_xmit_frame+0x0/0x320 [skge]

Quoted 8 lines
Quoted 2 lines

No other relevant messages around that I can see. Is this a bug? Any information I could supply to help debug it?

This is a bogus message added by the -rt patch. It is not a bug.

The trylock scheme in some newer net drivers (grep for NETDEV_TX_LOCKED) uses local_irq_save/restore because there is no spin_trylock_irqsave/spin_trylock_failed_irqrestore API.

Would it have any undesirable effect to find this and comment it out? There are quite a few messages in the logs. Knowing it is not a bug I may try the driver a bit more (I rebooted into sk98lin just in case ;-)

Thanks for the info.
-- Fernando

#3 lore raw
Quoted 17 lines · On Mon, 17 Oct 2005 19:02:33 -0700 Fernando Lopez-Lezcano…
Quoted 7 lines · Jeff Garzik
Quoted 6 lines · Fernando Lopez-Lezcano

I'm running 2.6.14-rc4-rt6 and trying the skge driver instead of the sk98lin and I'm getting these warnings in my logs (this is probably not related to the rt patch):

network driver disabled interrupts: skge_xmit_frame+0x0/0x320 [skge]

Quoted 8 lines
Quoted 2 lines

No other relevant messages around that I can see. Is this a bug? Any information I could supply to help debug it?

This is a bogus message added by the -rt patch. It is not a bug.

The trylock scheme in some newer net drivers (grep for NETDEV_TX_LOCKED) uses local_irq_save/restore because there is no spin_trylock_irqsave/spin_trylock_failed_irqrestore API.

Quoted 6 lines

Would it have any undesirable effect to find this and comment it out? There are quite a few messages in the logs. Knowing it is not a bug I may try the driver a bit more (I rebooted into sk98lin just in case ;-)

Thanks for the info.
-- Fernando

Or get the -rt folks to come with a better way.

Quoted 5 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
Stephen Hemminger <[email protected]>
OSDL http://developer.osdl.org/~shemminger
#4 lore raw
Quoted 20 lines · Stephen Hemminger
Quoted 17 lines · On Mon, 17 Oct 2005 19:02:33 -0700 Fernando Lopez-Lezcano…
Quoted 15 lines · Jeff Garzik
Quoted 8 lines · Fernando Lopez-Lezcano

I'm running 2.6.14-rc4-rt6 and trying the skge driver instead of the sk98lin and I'm getting these warnings in my logs (this is probably not related to the rt patch):

network driver disabled interrupts: skge_xmit_frame+0x0/0x320 [skge]

No other relevant messages around that I can see. Is this a bug? Any information I could supply to help debug it?

This is a bogus message added by the -rt patch. It is not a bug.

The trylock scheme in some newer net drivers (grep for NETDEV_TX_LOCKED) uses local_irq_save/restore because there is no spin_trylock_irqsave/spin_trylock_failed_irqrestore API.

Quoted 9 lines
Quoted 6 lines

Would it have any undesirable effect to find this and comment it out? There are quite a few messages in the logs. Knowing it is not a bug I may try the driver a bit more (I rebooted into sk98lin just in case ;-)

Thanks for the info.
-- Fernando

Or get the -rt folks to come with a better way.

Like adding a spin_trylock_irqsave/spin_trylock_failed_irqrestore API?

-- Steve

#5 lore raw
Quoted 1 line · Steven Rostedt

Like adding a spin_trylock_irqsave/spin_trylock_failed_irqrestore API?

there's spin_trylock_irqsave() already, which can be used just fine.

but in any case, this is something for the -rt tree only, with which we dont want to pester upstream ...

Ingo