fxload patch to set bRequest byte

diff -u -r1.9 ezusb.c
@@ -428,6 +428,7 @@
     int		device;
     ram_mode	mode;
     unsigned	total, count;
+    int         request;
 };
 
 # define RETRY_LIMIT 5

@@ -482,7 +483,7 @@
      */
     while ((rc = ezusb_write (ctx->device,
 		    external ? "write external" : "write on-chip",
-		    external ? RW_MEMORY : RW_INTERNAL,
+		    external ? (ctx->request>=0?ctx->request:RW_MEMORY) : RW_INTERNAL,
 		    addr, data, len)) < 0
 		&& retry < RETRY_LIMIT) {
 	  if (errno != ETIMEDOUT)

@@ -506,7 +507,7 @@
  * memory is written, expecting a second stage loader to have already
  * been loaded.  Then file is re-parsed and on-chip memory is written.
  */
-int ezusb_load_ram (int fd, const char *path, int fx2, int stage)
+int ezusb_load_ram (int fd, const char *path, int fx2, int stage, int request)
 {
     FILE			*image;
     unsigned short		cpucs_addr;

@@ -550,6 +551,7 @@
     /* scan the image, first (maybe only) time */
     ctx.device = fd;
     ctx.total = ctx.count = 0;
+    ctx.request = request;
     status = parse_ihex (image, &ctx, is_external, ram_poke);
     if (status < 0) {
 	logerror("unable to download %s\n", path);

diff -u -r1.3 ezusb.h
@@ -31,7 +31,7 @@
  *
  * The target processor is reset at the end of this download.
  */
-extern int ezusb_load_ram (int dev, const char *path, int fx2, int stage);
+extern int ezusb_load_ram (int dev, const char *path, int fx2, int stage, int request);
 
 
 /*

diff -u -r1.8 main.c
@@ -30,6 +30,7 @@
  *     -t <type>       -- uController type: an21, fx, fx2
  *     -s <path>       -- use this second stage loader
  *     -c <byte>       -- Download to EEPROM, with this config byte
+ *     -r <byte>       -- use this request byte for uploading external data
  *
  *     -L <path>       -- Create a symbolic link to the device.
  *     -m <mode>       -- Set the permissions on the device after download.

@@ -96,8 +97,9 @@
       mode_t		mode = 0;
       int		opt;
       int		config = -1;
+      int		request = -1;
 
-      while ((opt = getopt (argc, argv, "2vV?D:I:L:c:lm:s:t:")) != EOF)
+      while ((opt = getopt (argc, argv, "2vV?D:I:L:c:lm:s:t:r:")) != EOF)
       switch (opt) {
 
 	  case '2':		// original version of "-t fx2"

@@ -156,6 +158,14 @@
 	  case 'v':
 	    verbose++;
 	    break;
+            
+	  case 'r':
+	    request = strtoul (optarg, 0, 0);
+	    if (request < 0 || request > 255) {
+		logerror("illegal request byte: %s\n", optarg);
+		goto usage;
+	    }
+	    break;
 
 	  case '?':
 	  default:

@@ -164,6 +174,11 @@
       }
 
       if (config >= 0) {
+            if (request >= 0) {
+		logerror("can't set both a config and a request byte\n");
+		goto usage;
+            }
+
 	    if (type == 0) {
 		logerror("must specify microcontroller type %s",
 				"to write EEPROM!\n");

@@ -179,6 +194,14 @@
 		goto usage;
 	    }
       }
+      
+      if (request >= 0) {
+	    if (!stage1 || !ihex_path) {
+		logerror("need 2nd stage loader and firmware %s",
+				"to use request byte\n");
+		goto usage;
+	    }
+      }
 
       if (!device_path) {
 	    logerror("no device specified!\n");

@@ -188,7 +211,7 @@
 	    fputs (" [-vV] [-l] [-t type] [-D devpath]\n", stderr);
 	    fputs ("\t\t[-I firmware_hexfile] ", stderr);
 	    fputs ("[-s loader] [-c config_byte]\n", stderr);
-	    fputs ("\t\t[-L link] [-m mode]\n", stderr);
+	    fputs ("\t\t[-r request_byte] [-L link] [-m mode]\n", stderr);
 	    fputs ("... [-D devpath] overrides DEVICE= in env\n", stderr);
 	    fputs ("... device types:  one of an21, fx, fx2\n", stderr);
 	    fputs ("... at least one of -I, -L, -m is required\n", stderr);

@@ -218,7 +241,7 @@
 		/* first stage:  put loader into internal memory */
 		if (verbose)
 		    logerror("1st stage:  load 2nd stage loader\n");
-		status = ezusb_load_ram (fd, stage1, fx2, 0);
+		status = ezusb_load_ram (fd, stage1, fx2, 0, request);
 		if (status != 0)
 		    return status;
 		

@@ -226,14 +249,14 @@
 		if (config >= 0)
 		    status = ezusb_load_eeprom (fd, ihex_path, type, config);
 		else
-		    status = ezusb_load_ram (fd, ihex_path, fx2, 1);
+		    status = ezusb_load_ram (fd, ihex_path, fx2, 1, request);
 		if (status != 0)
 		    return status;
 	    } else {
 		/* single stage, put into internal memory */
 		if (verbose)
 		    logerror("single stage:  load on-chip memory\n");
-		status = ezusb_load_ram (fd, ihex_path, fx2, 0);
+		status = ezusb_load_ram (fd, ihex_path, fx2, 0, request);
 		if (status != 0)
 		    return status;
 	    }