AMCC440EP Boot Source
We are looking at the yosemite design but want a CF2 socket for the OS image. Can U-Boot reside in the EEPROM accessible via I2C?
This would allow us to remove the flash entirely in favor of the CF2 flash. If yes, are there any drawbacks to this vs. keeping a small bit of flash soldered to the board?
Signature · 4 lines
Please help fix the U.S. software industry before it is too late. Contact your U.S. representatives with this information: http://lpf.ai.mit.edu/Patents/industry-at-risk.html http://www.groklaw.net/article.php?story=20041003041632172
Hi Dick,
Quoted 2 lines · Dick Hollenbeck
We are looking at the yosemite design but want a CF2 socket for the OS
image. Can U-Boot reside in the EEPROM accessible via I2C?
No. 440EP definitely can't boot from I2C EEPROM! With CF2 you mean CompactFlash, right?
Quoted 3 lines
This would allow us to remove the flash entirely in favor of the CF2 flash. If yes, are there any drawbacks to this vs. keeping a small bit of flash soldered to the board?
Keep the small NOR FLASH and save yourself a lot of trouble. 256kB is enough in most cases.
By the way: This is off topic here and should be asked in the U-Boot list.
Best regards,
Stefan