dvb: Add support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000)

@@ -13,6 +13,8 @@
 #include "bcm3510.h"
 #include "stv0297_cs2.h"
 #include "mt312.h"
+#include "lgdt330x.h"
+#include "dvb-pll.h"
 
 /* lnb control */
 

@@ -295,6 +297,52 @@
 	return request_firmware(fw, name, fc->dev);
 }
 
+static int lgdt3303_pll_set(struct dvb_frontend* fe,
+                            struct dvb_frontend_parameters* params)
+{
+	struct flexcop_device *fc = fe->dvb->priv;
+	u8 buf[4];
+	struct i2c_msg msg =
+		{ .addr = 0x61, .flags = 0, .buf = buf, .len = 4 };
+	int err;
+
+	dvb_pll_configure(&dvb_pll_tdvs_tua6034,buf, params->frequency, 0);
+	dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
+			__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
+	if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) {
+		printk(KERN_WARNING "lgdt3303: %s error "
+			   "(addr %02x <- %02x, err = %i)\n",
+			   __FUNCTION__, buf[0], buf[1], err);
+		if (err < 0)
+			return err;
+		else
+			return -EREMOTEIO;
+	}
+
+	buf[0] = 0x86 | 0x18;
+	buf[1] = 0x50;
+	msg.len = 2;
+	if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) {
+		printk(KERN_WARNING "lgdt3303: %s error "
+			   "(addr %02x <- %02x, err = %i)\n",
+			   __FUNCTION__, buf[0], buf[1], err);
+		if (err < 0)
+			return err;
+		else
+			return -EREMOTEIO;
+	}
+
+        return 0;
+}
+
+static struct lgdt330x_config air2pc_atsc_hd5000_config = {
+	.demod_address       = 0x59,
+	.demod_chip          = LGDT3303,
+	.serial_mpeg         = 0x04,
+	.pll_set             = lgdt3303_pll_set,
+	.clock_polarity_flip = 1,
+};
+
 static struct nxt2002_config samsung_tbmv_config = {
 	.demod_address    = 0x0a,
 	.request_firmware = flexcop_fe_request_firmware,

@@ -406,6 +454,11 @@
 		fc->dev_type          = FC_AIR_ATSC2;
 		info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
 	} else
+	/* try the air atsc 3nd generation (lgdt3303) */
+	if ((fc->fe = lgdt330x_attach(&air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
+		fc->dev_type          = FC_AIR_ATSC3;
+		info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
+	} else
 	/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
 	if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
 		fc->dev_type          = FC_AIR_ATSC1;

@@ -51,6 +51,7 @@
 	"Sky2PC/SkyStar 2 DVB-S",
 	"Sky2PC/SkyStar 2 DVB-S (old version)",
 	"Cable2PC/CableStar 2 DVB-C",
+	"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
 };
 
 const char *flexcop_bus_names[] = {

@@ -26,6 +26,7 @@
 	FC_SKY,
 	FC_SKY_OLD,
 	FC_CABLE,
+	FC_AIR_ATSC3,
 } flexcop_device_type_t;
 
 typedef enum {

@@ -193,6 +193,7 @@
 	v204 = fc->read_ibi_reg(fc,misc_204);
 	v204.misc_204.Per_reset_sig = 0;
 	fc->write_ibi_reg(fc,misc_204,v204);
+	msleep(1);
 	v204.misc_204.Per_reset_sig = 1;
 	fc->write_ibi_reg(fc,misc_204,v204);
 }

@@ -27,6 +27,7 @@
  *   DViCO FusionHDTV 3 Gold-T
  *   DViCO FusionHDTV 5 Gold
  *   DViCO FusionHDTV 5 Lite
+ *   Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
  *
  * TODO:
  * signal strength always returns 0.

@@ -223,6 +224,11 @@
 		0x4c, 0x14
 	};
 
+	static u8 flip_lgdt3303_init_data[] = {
+		0x4c, 0x14,
+		0x87, 0xf3
+	};
+
 	struct lgdt330x_state* state = fe->demodulator_priv;
 	char  *chip_name;
 	int    err;

@@ -235,8 +241,13 @@
 		break;
 	case LGDT3303:
 		chip_name = "LGDT3303";
-		err = i2c_write_demod_bytes(state, lgdt3303_init_data,
-					    sizeof(lgdt3303_init_data));
+		if (state->config->clock_polarity_flip) {
+			err = i2c_write_demod_bytes(state, flip_lgdt3303_init_data,
+						    sizeof(flip_lgdt3303_init_data));
+		} else {
+			err = i2c_write_demod_bytes(state, lgdt3303_init_data,
+						    sizeof(lgdt3303_init_data));
+		}
 		break;
 	default:
 		chip_name = "undefined";

@@ -47,6 +47,10 @@
 
 	/* Need to set device param for start_dma */
 	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
+
+	/* Flip the polarity of the mpeg data transfer clock using alternate init data
+	 * This option applies ONLY to LGDT3303 - 0:disabled (default) 1:enabled */
+	int clock_polarity_flip;
 };
 
 extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,

@@ -226,7 +226,7 @@
 EXPORT_SYMBOL(dvb_pll_tua6034);
 
 /* Infineon TUA6034
- * used in LG Innotek TDVS-H062F
+ * used in LG TDVS H061F and LG TDVS H062F
  */
 struct dvb_pll_desc dvb_pll_tdvs_tua6034 = {
 	.name  = "LG/Infineon TUA6034",