Skip to contentSkip to conversation

How to program flash of omap5912osk with usb?

U-Boot-Users Ziqi He 2 participants 10 messages Nov 4, 2005 – Nov 7, 2005

lore
Share & tools
lore

Ziqi He

author
#0 lore raw

Hello all:

I have downloaded the u-boot1.1.3 to the flash of omap5912osk.I can use TFTP to download kernel to flash, but in this project I must download kernel and root file system with USB interface. Now I do not know how to settle this problem. How can I deal with this problem?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20051104/464fa045/attachment.htm

#1 lore raw
Quoted 5 lines · In message <[email protected]> you wrote:

I have downloaded the u-boot1.1.3 to the flash of omap5912osk.I can use TFTP to download kernel to flash, but in this project I must download kernel and root file system with USB interface. Now I do not know how to settle this problem. How can I deal with this problem?

You can implement support for USB-based console (enable with "setenv stdout usbtty; setenv stdin usbtty") like it was done for the SX1 and omap1510inn board.

Then you can use standard serial download commands (loadb).

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You see but you do not observe.
Sir Arthur Conan Doyle, in "The Memoirs of Sherlock Holmes"
author
#2 lore raw

2005/11/4, Wolfgang Denk <[email protected]>:

Quoted 11 lines
Quoted 5 lines · In message <[email protected]> you wrote:

I have downloaded the u-boot1.1.3 to the flash of omap5912osk.I can use TFTP to download kernel to flash, but in this project I must download kernel and root file system with USB interface. Now I do not know how to settle this problem. How can I deal with this problem?

You can implement support for USB-based console (enable with "setenv stdout usbtty; setenv stdin usbtty") like it was done for the SX1 and omap1510inn board.

Quoted 6 lines

Then you can use standard serial download commands (loadb).

Best regards,

Wolfgang Denk

Thanks for your help.
But what kind of terminal can we use to download linux kernal to flash? And what is the name of this terminal?

#3 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

But what kind of terminal can we use to download linux kernal to flash? And what is the name of this terminal?

You can use any serial port on your host computer with some temrinal emulation program. I usually use kermit, but you might have different preferences.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If all the Chinese simultaneously jumped into the Pacific  off  a  10
foot platform erected 10 feet off their coast, it would cause a tidal
wave that would destroy everything in this country west of Nebraska.
author
#4 lore raw
Quoted 10 lines

But what kind of terminal can we use to download linux kernal to flash? And what is the name of this terminal?

You can use any serial port on your host computer with some temrinal emulation program. I usually use kermit, but you might have different preferences.

Quoted 4 lines

Best regards,

Wolfgang Denk

Kermit is a terminal which download kernel through serial port, but I need a terminal which can download kernel through USB port because I can not download kernel through serial port in this project. what kind of terminal shall I use?

Best regards

Ziqi He

#5 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

Kermit is a terminal which download kernel through serial port, but I need a

[Kermit can do a lot more, bit this is off topic here.]

Quoted 3 lines

terminal which can download kernel through USB port because I can not download kernel through serial port in this project. what kind of terminal shall I use?

I already told you that you can implement a usbtty device which acts like a serial port on the host side.

Please re-read my posting.

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Remember, an int is not always 16 bits. I'm  not  sure,  but  if  the
80386  is one step closer to Intel's slugfest with the CPU curve that
is aymptotically approaching a real machine, perhaps an int has  been
implemented as 32 bits by some Unix vendors...?       - Derek Terveer
author
#6 lore raw

-----????-----
???: wd at denx.de [mailto:wd at denx.de]
????: 2005?11?4? 21:17
???: Ziqi He
??: u-boot-users at lists.sourceforge.net
??: Re: ??: [U-Boot-Users] How to program flash of omap5912osk with usb?

Quoted 2 lines · In message <[email protected]> you wrote:

Kermit is a terminal which download kernel through serial port, but I need

a

[Kermit can do a lot more, bit this is off topic here.]

Quoted 3 lines

terminal which can download kernel through USB port because I can not download kernel through serial port in this project. what kind of terminal shall I use?

I already told you that you can implement a usbtty device which acts like a serial port on the host side.

Please re-read my posting.

Best regards,

Wolfgang Denk

I am very sorry for not noticing your good suggestion. And I have understood your meaning. Thank you very much.

author
#7 lore raw
In reply to Wolfgang Denk
Quoted 2 lines · In message <[email protected]> you wrote:

Kermit is a terminal which download kernel through serial port, but I need

a

Quoted 6 lines

[Kermit can do a lot more, bit this is off topic here.]

terminal which can download kernel through USB port because I can not download kernel through serial port in this project. what kind of terminal shall I use?

Quoted 8 lines

I already told you that you can implement a usbtty device which acts like a serial port on the host side.

Please re-read my posting.

Best regards,

Wolfgang Denk

After implementing support for USB-based console ("setenv stdout usbtty; setenv stdin usbtty") through serial port, I want to download kernel to flash through USB port. So I connected USB port and typed the command loadb using the terminal named Hyperterminal in Windows. But I found that the kernel had been downloaded to flash through serial port rather than USB port. If I cut down the connection between host serial port and target serial port, I can not type any command. How can I deal with this problem.

Best regards,

Ziqi He

#8 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

After implementing support for USB-based console ("setenv stdout usbtty; setenv stdin usbtty") through serial port, I want to download kernel to flash through USB port. So I connected USB port and typed the command loadb

"loadb" uses Kermit binary protocol. I am not sure if hyperterminal can send data using this protocol.

Quoted 2 lines

using the terminal named Hyperterminal in Windows. But I found that the kernel had been downloaded to flash through serial port rather than USB

No. If you have usbtty working, than your USB link works exactly like a serial port as far as U-Boot is concerned.

Quoted 2 lines

port. If I cut down the connection between host serial port and target serial port, I can not type any command. How can I deal with this problem.

U-Boot is waiting for a file download using Kermit Binary Protocol. Either you send a file using this protocol (which requires a tool that implements this protocol - as mentioned before I recomenmd to use kermit), or you can terminate the download by pressing ^C.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Nothing ever becomes real till it is experienced -- even a proverb is
no proverb to you till your life has illustrated it.     - John Keats
author
#9 lore raw
In reply to Wolfgang Denk

-----????-----
???: wd at denx.de [mailto:wd at denx.de]
????: 2005?11?4? 19:03
???: He Ziqi
??: u-boot-users at lists.sourceforge.net
??: Re: [U-Boot-Users] How to program flash of omap5912osk with usb?

Quoted 3 lines · In message <[email protected]> you wrote:

But what kind of terminal can we use to download linux kernal to flash? And what is the name of this terminal?

You can use any serial port on your host computer with some temrinal emulation program. I usually use kermit, but you might have different preferences.

Best regards,

Wolfgang Denk

Signature · 8 lines
Kermit is a terminal which download kernel through serial port, but I need a
terminal which can download kernel through USB port because I can not
download kernel through serial port in this project. what kind of terminal
shall I use?

Best regards

Ziqi He