2.6 series kernels panic on boot at PCI probe with 450nx
[1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x kernels boot without hitch) [2.] System: HP Netserver LH4s [3.] Keywords: kernel, i450nx, PCI probe, boot, panic
[4.] Kernel version: 2.6.9-22, 2.6.9-11 by me and (2.6.6, 2.6.7 by Andrew Feldhacker)
[7.7.] For an additional example see: Andrew Feldhacker's June 2004 report at http://uwsg.ucs.indiana.edu/hypermail/linux/kernel/0407.0/0915.html
[X.] Other notes:
-Someone reported that Mandrake 10.2 beta did not have this problem.
-I know the legacy megaraid now requires a custom built kernel. I just can't get past the PCI-Probe to install it.
[7.] Environment
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 0fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 1vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 1fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 2vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 2fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 3vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 3fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
[7.3.] Module information (from /proc/modules):
ide-cd 34016 0 (autoclean) cdrom 32896 0 (autoclean) [ide-cd] qla2100 287804 5 iptable_filter 2412 0 (autoclean) (unused) ip_tables 16544 1 [iptable_filter] softdog 3004 1 usbserial 23964 0 (autoclean) (unused) parport_pc 18884 1 (autoclean) lp 9156 0 (autoclean) parport 38848 1 (autoclean) [parport_pc lp] autofs4 16984 0 (autoclean) (unused) lock_gulm 65712 1 crc32 3764 0 [lock_gulm] gfs 291308 1 (autoclean) lock_harness 3576 0 (autoclean) [lock_gulm gfs] pool 84928 4 natsemi 20000 1 e100 60048 1 floppy 57552 0 (autoclean) sg 37388 0 (autoclean) microcode 6912 0 (autoclean) keybdev 2976 0 (unused) mousedev 5688 1 hid 22308 0 (unused) input 6176 0 [keybdev mousedev hid] usbcore 81152 1 [usbserial hid] ext3 89992 2 jbd 55092 2 [ext3] megaraid 30636 3
sd_mod 13936 16scsi_mod 115240 3 [qla2100 sg megaraid sd_mod]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1400-14ff : LSI Logic / Symbios Logic 53c895
8000-803f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
9000-901f : Intel Corp. 82371AB/EB/MB PIIX4 USB
9020-902f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
9020-9027 : ide0
a000-afff : PCI Bus #01
a000-a0ff : LSI Logic / Symbios Logic 53c895 (#2)
b000-bfff : PCI Bus #02
b000-b0ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
b000-b0ff : eth1
b400-b4ff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
b400-b4ff : qla2100
b800-b81f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
b800-b81f : e100
iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000c8800-000c97ff : Extension ROM
000c9800-000c9fff : Extension ROM
000f0000-000fffff : System ROM
00100000-e7feffff : System RAM
00100000-002aba6e : Kernel code
002aba6f-003efb27 : Kernel data
e7ff0000-e7fffbff : ACPI Tables
e7fffc00-e7ffffff : ACPI Non-volatile Storage
e8000000-e8007fff : Hewlett-Packard Company NetServer Smart IRQ Router e8008000-e8008fff : Cirrus Logic GD 5446
e8009000-e80090ff : LSI Logic / Symbios Logic 53c895
e800a000-e800afff : LSI Logic / Symbios Logic 53c895
e8100000-e81fffff : PCI Bus #01
e8100000-e8100fff : LSI Logic / Symbios Logic 53c895 (#2)
e8101000-e81010ff : LSI Logic / Symbios Logic 53c895 (#2)
e8200000-e83fffff : PCI Bus #02
e8200000-e82fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e8200000-e82fffff : e100
e8300000-e8300fff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
e8300000-e8300fff : eth1
e8301000-e8301fff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
e8301000-e8301fff : qla2100
ea000000-ebffffff : Cirrus Logic GD 5446
f0000000-f7ffffff : Intel Corp. 80960RP [i960RP Microprocessor]
f0000000-f000007f : MegaRAID: LSI Logic Corporation
f8000000-f80fffff : PCI Bus #02
f8000000-f8000fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
f8000000-f8000fff : e100
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fffe8800-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
Quoted 13 lines
00:02.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size
08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=248 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e8100000-e81fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:02.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 03) (prog-if 01) Subsystem: Hewlett-Packard Company MegaRAID T5, Integrated HP NetRAID Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin A routed to IRQ 10 BIST result: 00 Region 0: Memory at
f0000000(32-bit, prefetchable) [size=128M] Expansion ROM at <unassigned> [disabled] [size=32K] 00:03.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=02, subordinate=02, sec-latency=234 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: e8200000-e83fffff Prefetchable memory behind bridge: 00000000f8000000-00000000f8000000 BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:06.0 System peripheral: Hewlett-Packard Company NetServer Smart IRQ Router (rev a0) Subsystem: Hewlett-Packard Company: Unknown device 0001 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slowQuoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at
e8000000(32-bit, non-prefetchable) [size=32K] 00:08.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 0001 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at
ea000000(32-bit, prefetchable) [size=32M] Region 1: Memory at
e8008000(32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=32K] 00:0f.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:0f.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 9020 [size=16] 00:0f.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-Quoted 1 line
SERR- <PERR- Interrupt: pin D routed to IRQ 0 Region 4: I/O ports at
9000 [size=32] 00:0f.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 00:10.0 Host bridge: Intel Corp. 450NX - 82451NX Memory & I/O Controller (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:12.0 Host bridge: Intel
Corp. 450NX - 82454NX/84460GX PCI Expander Bridge (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
Quoted 1 line
TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 72, cache line size
08 01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247 (7500ns min, 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at
e8009000(32-bit, non-prefetchable) [size=256] Region 2: Memory ate800a000(32-bit, non-prefetchable) [size=4K] 01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
Quoted 8 lines
Quoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247 (7500ns min,
16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=256] Region 1: Memory at
e8101000(32-bit, non-prefetchable) [size=256] Region 2: Memory ate8100000(32-bit, non-prefetchable) [size=4K] 02:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem: Hewlett-Packard Company NetServer 10/100TX Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=mediumQuoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min,
14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 15 Region 0: Memory at
f8000000(32-bit, prefetchable) [size=4K] Region 1: I/O ports at b800 [size=32] Region 2: Memory ate8200000(32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold-)Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller Subsystem: Netgear FA311 / FA312 (FA311 with WoL HW) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B+ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=mediumQuoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 90 (2750ns min,
13000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at b000 [size=256] Region 1: Memory at
e8300000(32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mAPME(D0+,D1+,D2+,D3hot+,D3cold-)Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 02:04.0 SCSI storage controller: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter (rev 03) Subsystem: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=mediumQuoted 1 line
TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size
08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b400 [size=256] Region 1: Memory at
e8301000(32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD0 RAID1 8677R Rev: D
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 01
Vendor: HP Model: FCArray 5_69464 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 02
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Quoted 2 lines · Frank Overton
[1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x kernels boot without hitch) [2.] System: HP Netserver LH4s
Can you post the oops message that you see?
thanks,
greg k-h
Greg,
I don't know any good way to save the oops message. I'd love a pointer on that.
Here is a hand copy of the oops message I am seeing.
-- top of screen --
c316d000 c3126240 00000000 00000000 c01de368 00000000 c31262b8c3126240
Call Trace: [<co23e390>] class_device_create_file+0x11/0x16 [<co1ddcaf>] pci_alloc_child_bus+0x74/0xb8 [<co1ddda5>] pci_scan_bridge+0x90/0x1cd [<co1de368>] pci_scan_child_bus+0x51/0x77 [<co1de4c2>] pci_scan_bus_parented+0x11d/0x133 [<co29d3ec>] pci_bios_scan_root+0x3d/0x40 [<co208e00>] acpi_pci_root_add+0x19a/0x1f0 [<co20d825>] acpi_bus_driver_init+0x2c/0x8c [<co20e019>] acpi_bus_find_driver+0x110/0x21a [<co20e561>] acpi_bus_add+0x12c/0x152 [<co20e68b>] acpi_bus_scan+0x104/0x156 [<co3b7c7a>] acpi_bus_scan_init+0x48/0x5e [<co3a86fa>] do_initcalls+0x49/0x8e [<co100454>] init+0x0/0x1d8 [<co1041d5>] kernel_thread_helper+0x5/0xb
Code:
00 00 0f 8e 37 02 00 00 83 c4 14 5b 5e 5f 5d c3 53 89 c1 89 c1 89 d3 85 c0 74 12 83 78 30 00 0f 94 c2 85 db 0f 94 c0 09 d0 a8 01 74 08 <0f> 0b 7d 01 1b 5b 31 c0 8b 41 30 89 da b9 04 00 00 00 5b e9 47
<0> Fatal Exception: panic in 5 seconds
Quoted 10 lines · Greg KH
Quoted 2 lines · Frank Overton
[1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x kernels boot without hitch) [2.] System: HP Netserver LH4s
Can you post the oops message that you see?
thanks,
greg k-h
Quoted 4 lines · Frank Overton
Greg,
I don't know any good way to save the oops message. I'd love a pointer on that.
Serial console perhaps? There is documentation on how to do that in the Documentation/ directory.
Quoted 6 lines
Here is a hand copy of the oops message I am seeing.
-- top of screen --
c316d000c312624000000000 00000000c01de36800000000c31262b8c3126240
Quoted 16 lines
Call Trace: [<co23e390>] class_device_create_file+0x11/0x16 [<co1ddcaf>] pci_alloc_child_bus+0x74/0xb8 [<co1ddda5>] pci_scan_bridge+0x90/0x1cd [<co1de368>] pci_scan_child_bus+0x51/0x77 [<co1de4c2>] pci_scan_bus_parented+0x11d/0x133 [<co29d3ec>] pci_bios_scan_root+0x3d/0x40 [<co208e00>] acpi_pci_root_add+0x19a/0x1f0 [<co20d825>] acpi_bus_driver_init+0x2c/0x8c [<co20e019>] acpi_bus_find_driver+0x110/0x21a [<co20e561>] acpi_bus_add+0x12c/0x152 [<co20e68b>] acpi_bus_scan+0x104/0x156 [<co3b7c7a>] acpi_bus_scan_init+0x48/0x5e [<co3a86fa>] do_initcalls+0x49/0x8e [<co100454>] init+0x0/0x1d8 [<co1041d5>] kernel_thread_helper+0x5/0xb
Ugh, I really wish I knew which ddevice acpi was trying to add here. It looks like it is addding 2 pci busses with the same address, which would be very odd. How about creating a bug in bugzilla.kernel.org and assigning it to the ACPI group? They should be able to figure it out :)
thanks,
greg k-h
Quoted 5 lines
Ugh, I really wish I knew which ddevice acpi was trying to add here. It looks like it is addding 2 pci busses with the same address, which would be very odd.
known bios bug in early 450nx bioses...
bios upgrade usually fixes that.