tpm: Fix lack of driver_unregister in init failcases
PATCH 1/1 tpm: Fix lack of driver_unregister in init failcases
driver_unregister is not being properly called when the init function returns an error case. Restructured the return logic such that this and the other cleanups all happen in one place. Preformed many of the cleanups that Andrew Morton's patch on Thursday made in tpm_atmel.c. Fixed Matthieu's concern about writing before discovery.
---
drivers/char/tpm/tpm_nsc.c +25 -26
@@ -286,8 +286,4 @@ static int __init init_nsc(void)int lo, hi;int nscAddrBase =TPM_ADDR ; -driver_register (&nsc_drv); - -/* select PM channel 1 */ -tpm_write_index (nscAddrBase,NSC_LDN_INDEX ,0x12 );
@@ -299,6 +297,8 @@ static int __init init_nsc(void)return -ENODEV ; } +driver_register (&nsc_drv); + hi =tpm_read_index (nscAddrBase,TPM_NSC_BASE0_HI ); lo =tpm_read_index (nscAddrBase,TPM_NSC_BASE0_LO ); tpm_nsc.base = (hi<<8 ) | lo;
@@ -306,38 +306,28 @@ static int __init init_nsc(void)/* enable the DPM module */ tpm_write_index (nscAddrBase,NSC_LDC_INDEX ,0x01 ); - pdev =kmalloc (sizeof (struct platform_device ),GFP_KERNEL ); -if ( !pdev ) -return -ENOMEM ; - -memset (pdev,0 ,sizeof (struct platform_device )); + pdev =kzalloc (sizeof (struct platform_device ),GFP_KERNEL ); +if ( !pdev ) { + rc = -ENOMEM ; + goto err_unreg_drv; + } pdev->name ="tpm_nscl0" ; pdev->id =-1 ; pdev->num_resources =0 ; - pdev->dev.release = tpm_nsc_remove; + pdev->dev.release = tpm_nsc_remove; pdev->dev.driver = &nsc_drv; -if ((rc=platform_device_register (pdev)) <0 ) { -kfree (pdev); - pdev =NULL ; -return rc; - } +if ((rc =platform_device_register (pdev)) <0 ) + goto err_free_dev;if (request_region (tpm_nsc.base,2 ,"tpm_nsc0" ) ==NULL ) { -platform_device_unregister (pdev); -kfree (pdev); - pdev =NULL ; -return -EBUSY ; + rc = -EBUSY ; + goto err_unreg_dev; } -if ((rc =tpm_register_hardware (&pdev->dev, &tpm_nsc)) <0 ) { -release_region (tpm_nsc.base,2 ); -platform_device_unregister (pdev); -kfree (pdev); - pdev =NULL ; -return rc; - } +if ((rc =tpm_register_hardware (&pdev->dev, &tpm_nsc)) <0 ) + goto err_rel_reg;dev_dbg (&pdev->dev,"NSC TPM detected\n" ); dev_dbg(&pdev->dev,
@@ -373,6 +363,17 @@ static int __init init_nsc(void) tpm_read_index(nscAddrBase, 0x27) & 0x1F);return 0 ; + +err_rel_reg: +release_region (tpm_nsc.base,2 ); +err_unreg_dev: +platform_device_unregister (pdev); +err_free_dev: +kfree (pdev); + pdev =NULL ; +err_unreg_drv: +driver_unregister (&nsc_drv); +return rc; } static void __exit cleanup_nsc(void)
Quoted 38 lines · Kylene Jo Hall
driver_unregisteris not being properly called when the init function returns an error case. Restructured the return logic such that this and the other cleanups all happen in one place. Preformed many of the cleanups that Andrew Morton's patch on Thursday made intpm_atmel.c. Fixed Matthieu's concern about writing before discovery.Signed-off-by Kylene Hall---
drivers/char/tpm/tpm_nsc.c +3
-9@@ -286,8 +286,4 @@ static int __init init_nsc(void)int lo, hi;int nscAddrBase =TPM_ADDR ; -driver_register (&nsc_drv); - -/* select PM channel 1 */ -tpm_write_index (nscAddrBase,NSC_LDN_INDEX ,0x12 );@@ -299,6 +297,8 @@ static int __init init_nsc(void)return -ENODEV ; } +driver_register (&nsc_drv); + hi =tpm_read_index (nscAddrBase,TPM_NSC_BASE0_HI ); lo =tpm_read_index (nscAddrBase,TPM_NSC_BASE0_LO ); tpm_nsc.base = (hi<<8 ) | lo;@@ -306,38 +306,28 @@ static int __init init_nsc(void)/* enable the DPM module */ tpm_write_index (nscAddrBase,NSC_LDC_INDEX ,0x01 ); - pdev =kmalloc (sizeof (struct platform_device ),GFP_KERNEL ); -if ( !pdev ) -return -ENOMEM ; - -memset (pdev,0 ,sizeof (struct platform_device )); + pdev =kzalloc (sizeof (struct platform_device ),GFP_KERNEL );
drivers/char/tpm/tpm_nsc.c static int __init init_nsc(void) · line 318
Quoted 10 lines
drivers/char/tpm/tpm_nsc.c +5
-1+if ( !pdev ) { + rc = -ENOMEM ; + goto err_unreg_drv; + } pdev->name ="tpm_nscl0" ; pdev->id =-1 ; pdev->num_resources =0 ; - pdev->dev.release = tpm_nsc_remove; + pdev->dev.release = tpm_nsc_remove;
This driver is buggy. You must not provide your own release function - it doesn't solve the problem which the warning (which you get when you don't provide one) is telling you about.
You should convert your device driver over to the replacement dynamic platform support, once it is merged. IOW, something like:
pdev = platform_device_alloc("mydev", id);
if (pdev) {
err = platform_device_add_resources(pdev, &resources,
ARRAY_SIZE(resources));
if (err == 0)
err = platform_device_add_data(pdev, &platform_data,
sizeof(platform_data));
if (err == 0)
err = platform_device_add(pdev);
} else {
err = -ENOMEM;
}
if (err)
platform_device_put(pdev);Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core