Skip to contentSkip to conversation

pppoe/adsl-modem loopback??

DISCUSSION Hal MacArgle 3 participants 6 messages Nov 11, 2005 – Nov 14, 2005

lore
Share & tools
lore
#0 lore raw

Greetings: Trying to "help" a neighbour with her Westell ADSL modem on my bench too far from the CO to connect.. I know "help" is a mis-nomer because she knows more about ADSL than I... <grin> I've fetched all the docs etc from the Web and Westell that I can..

Does anyone know of a hardware "loopback" scheme, whatever, I can try? I know this info is sparce but I've found the modem using rp-pppoe but it fails because there is no carrier signal..

Does this make sense?? I'm almost positive there's nothing I can do except lug my desktop to town nearer the Central Office..

Any comments? TIA..

---

    Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1   (2.4.29)

.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 5 lines · Hal MacArgle

Greetings: Trying to "help" a neighbour with her Westell ADSL modem on my bench too far from the CO to connect.. I know "help" is a mis-nomer because she knows more about ADSL than I... <grin> I've fetched all the docs etc from the Web and Westell that I can..

Quoted 8 lines

Does anyone know of a hardware "loopback" scheme, whatever, I can try? I know this info is sparce but I've found the modem using rp-pppoe but it fails because there is no carrier signal..

Does this make sense?? I'm almost positive there's nothing I can do except lug my desktop to town nearer the Central Office..

Any comments? TIA..

Let me ask a basic question: Do you have DSL service to the phone line you are trying to use for testing? From the part of your message that reads "on my bench too far from the CO to connect", I surmise you do not.

Generally speaking, you cannot do DSL troublshooting on your workbench. You need to do it onsite, using the phone line the DSL modem is intended to connect to (or at least *some* phone line with DSL service).

I apologize if I'm going over things here that you already know, Hal ... but if you do misunderstand the situation at this basic a level, you'll just be banging your head against the wall uselessly.

From looking around the Web, I gather it is possible to connect two DSL modems together directly ... though I've never tried this myself. Even if that gave you a carrier signal, though, you'd then need something at the other end to act as a pppoe server, so you could test that part (not undoable; RP used to make a simple server available for testing router configurations, and they may still do so. It's probably less effort to troubleshoot onsite, though, as least for a one-time project.

If you post again on this, please include the make and model of the modem. Westell has a bunch of model numbers.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#2 lore raw
Quoted 13 lines · Ray Olszewski
Quoted 12 lines · Hal MacArgle

Greetings: Trying to "help" a neighbour with her Westell ADSL modem on my bench too far from the CO to connect.. I know "help" is a mis-nomer because she knows more about ADSL than I... <grin> I've fetched all the docs etc from the Web and Westell that I can..

Does anyone know of a hardware "loopback" scheme, whatever, I can try? I know this info is sparce but I've found the modem using rp-pppoe but it fails because there is no carrier signal..

Does this make sense?? I'm almost positive there's nothing I can do except lug my desktop to town nearer the Central Office..

Quoted 7 lines
Quoted 1 line

Any comments? TIA..

Let me ask a basic question: Do you have DSL service to the phone line you are trying to use for testing? From the part of your message that reads "on my bench too far from the CO to connect", I surmise you do not.

Thanks much Ray for your reply: Yes, I am 7 miles from the CO
and the "cutoff" point is 18,000 ft.. The "neighbour" is one block from the CO in town... Telco says we will "never" have *DSL...

Quoted 3 lines

Generally speaking, you cannot do DSL troublshooting on your workbench. You need to do it onsite, using the phone line the DSL modem is intended to connect to (or at least *some* phone line with DSL service).

The ideal situation, meaning I wouldn't have to bother anyone
but I wouldn't "learn" anything either, eh? I have a "political" problem in that the neighbour is a night owl and doesn't get out of bed until after 5PM each day; and I can't drive at night so......... I should refuse to try and help but I'm so bloody curious.... <grin>

Quoted 3 lines

I apologize if I'm going over things here that you already know, Hal ... but if you do misunderstand the situation at this basic a level, you'll just be banging your head against the wall uselessly.

Repetition is the best teacher, Ray; no one knows it all and
we learn something new each and every day.. The brain needs it I read.. Certainly mine does.. <grin>

Quoted 7 lines

From looking around the Web, I gather it is possible to connect two DSL modems together directly ... though I've never tried this myself. Even if that gave you a carrier signal, though, you'd then need something at the other end to act as a pppoe server, so you could test that part (not undoable; RP used to make a simple server available for testing router configurations, and they may still do so. It's probably less effort to troubleshoot onsite, though, as least for a one-time project.

We've done this many times with "old" dialup modems plus all
kinds of schemes in Amateur Radio; all analogue.. This strictly digital stuff is intimidating to me.. Do you have a start URL for the above? Maybe I'm carrying this "learning" too far..

Quoted 2 lines

If you post again on this, please include the make and model of the modem. Westell has a bunch of model numbers.

Its a Westell C90-36R516-01 and there is a lot of information
on the Web about them.. I fetched a file: westall.setup.exe; and to try it I installed Win98SE in a box just to see what cooks..

With the modem on, running that program, the screen flashes
something then a panel "Westell Modem Browser," with big red
characters: "NO CARRIER DETECT - DSL NOT CONNECTED," which is to be expected...

With the modem off, running the same program, screen prints a
panel "Find Modem:" with two windows; "Available TCP/IP Adapter
Addresses: 169.254.53.147" --and-- "Computed Broadcast IP Addresses:
169.254.255.255".. Another window: Status: "Searching For Media At:
169.254.255.255".. Big red characters again: "NO COMMUNICATION WITH THE MODEM." Windoze intimidates me too... <grin>

The led's on the modem seem OK.. "Link" Green.. "Power"
Green.. "Ready" Blinking Green and "Activity" 2 second yellow blinks when the program is sending something.. The docs say that the blinking Green led in Ready means not connected, which we know..

I understand most of this except the IP Address and can guess
that that is the IP address of Westall for further diags??? I tried pinging that address, on another machine connect to the INet, and got "host unreachable."

Linuxwise, setting up pppoe OK, I could get the modem sending
packets and waiting for an answer, according to DEBUG. So the modem seems to be working..

Bottom line is that I have to connect that modem to the
proper Telco line, as you suggested in the first place..

APPRECIATE!!

Signature · 7 lines
    Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1   (2.4.29)
.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#3 lore raw
Quoted 1 line · Hal MacArgle

On 11-11, Ray Olszewski wrote:

[...]

Quoted 5 lines
Quoted 1 line

Let me ask a basic question: Do you have DSL service to the phone line you are trying to use for testing? From the part of your message that reads "on my bench too far from the CO to connect", I surmise you do not.

Thanks much Ray for your reply: Yes, I am 7 miles from the CO
and the "cutoff" point is 18,000 ft.. The "neighbour" is one block from the CO in town... Telco says we will "never" have *DSL...

I'm sorry, Hal, but your reply makes me think I was not clear enough. Even if a customer is next door to the CO, he or she still needs to get DSL service on a line before trying to connect. DSL is not like dial-up; it uses high frequencies (above the band used for voice), requires lowpass filters on the telephones that share the circuit, and requires some setup at the telco end. Being within 18K feet is a *necessary* condition for DSL service to work, but not a *sufficient* condition ... you still need to order DSL explicitly from your telco (or a third-party provider, in some cases).

Quoted 4 lines
Quoted 1 line

Generally speaking, you cannot do DSL troublshooting on your workbench. You need to do it onsite, using the phone line the DSL modem is intended to connect to (or at least *some* phone line with DSL service).

The ideal situation, meaning I wouldn't have to bother anyone
but I wouldn't "learn" anything either, eh?

Depends. You won't learn much, if anything, about the physical layer that way. But if the problem is at the Ethernet layer or above (with encapsulations like pppoe the customary layer labels don't fit well, so I won't try to use them), you can readily troubleshoot it this way. So it sort of depends on what you want to learn, I guess. [...]

Quoted 6 lines
Quoted 1 line

From looking around the Web, I gather it is possible to connect two DSL modems together directly ... though I've never tried this myself. Even if that gave you a carrier signal, though, you'd then need something at the other end to act as a pppoe server, so you could test that part (not undoable; RP used to make a simple server available for testing router configurations, and they may still do so. It's probably less effort to troubleshoot onsite, though, as least for a one-time project.

We've done this many times with "old" dialup modems plus all
kinds of schemes in Amateur Radio; all analogue.. This strictly digital stuff is intimidating to me.. Do you have a start URL for the above? Maybe I'm carrying this "learning" too far..

I just Googled something like "DSL loopback testing" and one of the early hits discussed this. I'm sorry but I did not save the reference.

Quoted 10 lines
Quoted 1 line

If you post again on this, please include the make and model of the modem. Westell has a bunch of model numbers.

Its a Westell C90-36R516-01 and there is a lot of information
on the Web about them.. I fetched a file: westall.setup.exe; and to try it I installed Win98SE in a box just to see what cooks..

With the modem on, running that program, the screen flashes
something then a panel "Westell Modem Browser," with big red
characters: "NO CARRIER DETECT - DSL NOT CONNECTED," which is to be expected...

Yup.

Quoted 12 lines

With the modem off, running the same program, screen prints a
panel "Find Modem:" with two windows; "Available TCP/IP Adapter
Addresses: 169.254.53.147" --and-- "Computed Broadcast IP Addresses:
169.254.255.255".. Another window: Status: "Searching For Media At:
169.254.255.255".. Big red characters again: "NO COMMUNICATION WITH THE MODEM." Windoze intimidates me too... <grin>

The led's on the modem seem OK.. "Link" Green.. "Power"
Green.. "Ready" Blinking Green and "Activity" 2 second yellow blinks when the program is sending something.. The docs say that the blinking Green led in Ready means not connected, which we know..

Quoted 4 lines

I understand most of this except the IP Address and can guess
that that is the IP address of Westall for further diags??? I tried pinging that address, on another machine connect to the INet, and got "host unreachable."

Finally, a question I can actually answer! No, the 169.254.53.147 address is a private-space address, just one that you probably don't recognize. The address space 169.254.0.0/16 is a reserved block (like 192.168.0.0/16, 10.0.0.0/8, and the 172.something/20 one I can never remember) for local use. In this case, it is used for self-assignment of IP addresses when there is neither an explicit address assigned nor a DHCP response.

All modern versions of Windows (even Win98 is modern enough) include this default. But usually Linux implementations don't provide it (though I think some recent DHCP clients offer it as an option). And it's not as silly as it might seem at first; it is a convenient way to link up 2 laptops with a crossover cable, for example, and to support other ad hoc networks.

Quoted 6 lines

Linuxwise, setting up pppoe OK, I could get the modem sending
packets and waiting for an answer, according to DEBUG. So the modem seems to be working..

Bottom line is that I have to connect that modem to the
proper Telco line, as you suggested in the first place..

Yeah. You probably also need to wake up your friend long enough to get her to give you the install info she got from the telco. It will have info on how to set up an account (userid and password) that the pppoe client at her end (not sure if this is actually in the DSL modem or in software the attached PC uses; both approaches exist) will use to authenticate to the telco's pppoe server.

Some DSL-pppoe implementations allow a connection limited access without this authentication ... in my experience, just enough access to reach the authentication server and set up an account, but not enough actually to use the Internet ... that is, you get an unroutable address assigned to you until you have an account setup. Of course, your situation may be different; telco DSL implementations still aren't very standardized.

From what you've written, I'd guess that she has a pppoe problem, not any sort of a problem with the hardware itself.

Quoted 1 line

APPRECIATE!!

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#4 lore raw
In reply to Hal MacArgle
Quoted 14 lines · Hal MacArgle

Greetings: Trying to "help" a neighbour with her Westell ADSL modem on my bench too far from the CO to connect.. I know "help" is a mis-nomer because she knows more about ADSL than I... <grin> I've fetched all the docs etc from the Web and Westell that I can..

Does anyone know of a hardware "loopback" scheme, whatever, I can try? I know this info is sparce but I've found the modem using rp-pppoe but it fails because there is no carrier signal..

Does this make sense?? I'm almost positive there's nothing I can do except lug my desktop to town nearer the Central Office..

Any comments? TIA..

Quoted 8 lines

---

    Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1   (2.4.29)

.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Hi, Hal:

I've had aDSL with Earthlink and later Ameritech/SBC. Of course,
in each case there was equipment at the other end of my telephone line at the phone company's Central Office.

"...lug my desktop to town nearer the Central Office."

Your ending statement is the least logical or the most likely
reason why things are not working. IMHO, there must be a DSL modem at both ends of the telephone company's lines. I am guessing that you do not have DSL service, ergo you have no DSL modem at the CO end of your wires. You gotta have a modem at both ends. :-|

"rp-pppoe but it fails because there is no carrier signal"

Yep, unless there is a modem at the CO end of the telephone wires, you will not get a carrier! :-|

HTH, Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#5 lore raw
Quoted 5 lines · chuck gelm

Hi, Hal:

I've had aDSL with Earthlink and later Ameritech/SBC. Of course,
in each case there was equipment at the other end of my telephone line at the phone company's Central Office.

Greetings: Ray queued me down the right path and with several
comments so I now have a handle on it along with a site and file he
recommended: DSL-HOWTO.pdf.. Of course I already had this file in text form in Slackware's /usr/doc directory... Duh.. I yelled wolf a mite too soon methinks...

Quoted 7 lines

"...lug my desktop to town nearer the Central Office."

Your ending statement is the least logical or the most likely
reason why things are not working. IMHO, there must be a DSL modem at both ends of the telephone company's lines. I am guessing that you do not have DSL service, ergo you have no DSL modem at the CO end of your wires. You gotta have a modem at both ends. :-|

Yes and the Telco modem must send the proper signal to the
users modem to "lock." I've tested two Westells now, at the neighbours site, and they both lock as expected.. Talking to that modem shoudn't be a problem with Linux but with their XP lashup-- it'll take some time knowing me.. Maybe it'll really be plug 'n pray, eh??

Quoted 4 lines

"rp-pppoe but it fails because there is no carrier signal"

Yep, unless there is a modem at the CO end of the telephone wires, you will not get a carrier! :-|

Telco calls it "DSLAM" or something like that.. My notes are
not handy.. At any rate we're in business and the thruput should be good as I paced their site to the CO and it's only 150 ft... Joy, eh?

Appreciate!!

Signature · 7 lines
    Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1   (2.4.29)
.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs