Query regarding interrupt handler code in pciehp
Quoted 11 lines · Rajat Jain
Hi,
This is a query regarding the "
interrupt_event_handler()" function inpciehp_ctrl.c. Please refer to the following code:673: else if (ctrl->event_queue[loop].event_type =
INT_BUTTON_PRESS) {
675: if (ATTN_BUTTN(ctrl->ctrlcap)) {676: dbg("Button pressed\n"); 677: p_slot->hpc_ops->get_power_status(p_slot, &getstatus); 678: if (getstatus) {
Quoted 8 lines
As evident from above, in order to get Power Controller status, it checks the capability of Attention Button Present. Shouldn't it check the capability of Power Controller Present instead and should be written like this:
if (
POWER_CTRL(ctrl->ctrlcap)) {Please let me know if I am missing something.
So what exactly would your change look like? Does the current code not work properly for you?
thanks,
greg k-h
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_idv28&alloc_id845&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Quoted 6 lines · Rajat Jain
This is a query regarding the "
interrupt_event_handler()" function inpciehp_ctrl.c. Please refer to the following code:673: else if (ctrl->event_queue[loop].event_type =
INT_BUTTON_PRESS) {
675: if (ATTN_BUTTN(ctrl->ctrlcap)) {
Quoted 7 lines
676: dbg("Button pressed\n"); 677: p_slot->hpc_ops->get_power_status(p_slot, &getstatus); 678: if (getstatus) {As evident from above, in order to get Power Controller status, it checks the capability of Attention Button Present. Shouldn't it check the capability of Power Controller Present instead and should be
This code triggers when pciehp thinks that an attention button has been pressed. The ATTN_BUTTN() check is just a paranoia check making sure that the controller reported support for the attention button for this slot in the slot capabilities register. The follow on code check if the slot is powered on or not. If it was powered on, the attention button press was to turn it off (i.e. hot remove). If it was powered off, the attention button press was to turn it on (hot add). So, I think the code is correct.
thanks,
Rajesh
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_idv28&alloc_id845&op=click
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel