X and intelfb fight over videomode
Using the information from this thread:
http://marc.theaimsgroup.com/?t=112593256400003&r=1&w=2
I've now compiled a kernel with the intelfb and fbcon drivers linked in (no other fb drivers). By booting the kernel with vga=0x318 I get a 1024x768@16bpp console and drm/agp also seems happy.
However, as soon as X starts, the following message is printed to the kernel log:
mtrr: base(0xe0020000) is not aligned on a size(0x300000) boundary [drm:drm_unlock] *ERROR* Process 3013 using kernel context 0
Everything seems to work in X though. The first time that I switch from X to a vc, the screen stays black for a few seconds before I get the VC and then I get this:
intelfb: Changing the video mode is not supported.
intelfb: ring buffer : space: 61488 wanted 65472
intelfb: lockup - turning off hardware acceleration
I have X set to also use 1024x768@16bpp, what else do I need to do to make sure that intelfb and X play nice together?
Re,
David
PS
Please CC me on any replies
Quoted 17 lines · David Härdeman
Using the information from this thread:
http://marc.theaimsgroup.com/?t=112593256400003&r=1&w=2I've now compiled a kernel with the intelfb and fbcon drivers linked in (no other fb drivers). By booting the kernel with vga=0x318 I get a 1024x768@16bpp console and drm/agp also seems happy.
However, as soon as X starts, the following message is printed to the kernel log:
mtrr: base(0xe0020000) is not aligned on a size(0x300000) boundary [drm:drm_unlock] *ERROR* Process 3013 using kernel context 0
Everything seems to work in X though. The first time that I switch from X to a vc, the screen stays black for a few seconds before I get the VC and then I get this:
Quoted 7 lines
intelfb: Changing the video mode is not supported.
intelfb: ring buffer : space: 61488 wanted 65472
intelfb: lockup - turning off hardware accelerationI have X set to also use 1024x768@16bpp, what else do I need to do to make sure that intelfb and X play nice together?
Try booting with video=intelfb:1024x768-16@60,mtrr=0. Do not include the vga=0x318 option. This prevents intelfb from changing the videomode.
Tony
Quoted 5 lines · Antonino A. Daplas
Quoted 1 line · David Härdeman
intelfb: Changing the video mode is not supported.
Try booting with video=intelfb:1024x768-16@60,mtrr=0. Do not include the vga=0x318 option. This prevents intelfb from changing the videomode.
It seems that intelfb can't change it no matter what....booting with video=intelfb:1024x768-16@60,mtrr=0 gives me the usual vga console and no framebuffer. The following is printed during boot:
[...]
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
intelfb: Version 0.9.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
intelfb: 00:02.0: Intel(R) 852GM, aperture size 128MB, stolen memory 8060kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Video mode must be programmed at boot time.
[...]
On the other hand, the vga=0x318 gives a 1024x768 console (and the vc <-> X fight) with the following messages during boot:
[...]
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
intelfb: Version 0.9.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
intelfb: 00:02.0: Intel(R) 852GM, aperture size 128MB, stolen memory 8060kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Initial video mode is 1024x768-32@60.
intelfb: Changing the video mode is not supported.
Console: switching to colour frame buffer device 128x48
[...]
(I tried X in 1024x768-32bpp after seeing the messages from the vga=... boot but the problems remained)
Suggestions?
//David
Quoted 11 lines · David Härdeman
Quoted 5 lines · Antonino A. Daplas
Quoted 1 line · David Härdeman
intelfb: Changing the video mode is not supported.
Try booting with video=intelfb:1024x768-16@60,mtrr=0. Do not include the vga=0x318 option. This prevents intelfb from changing the videomode.
It seems that intelfb can't change it no matter what....booting with video=intelfb:1024x768-16@60,mtrr=0 gives me the usual vga console and no framebuffer. The following is printed during boot:
Ah, okay, you have a flatpanel display, so you really need vesa to program the mode.
Quoted 2 lines
Suggestions?
The main problem is that when check_var fails, set_par is not called which means that the ringbuffer is not set up correctly after switching from X.
Try this first, then we'll think of a definitive solution later.
Open drivers/video/intelfb/intelfbdrv.c and look at intelfb_check_var().
Look for this particular snippet...
if (FIXED_MODE(dinfo) &&
(change_var ||
var->yres_virtual > dinfo->initial_var.yres_virtual ||
var->yres_virtual < dinfo->initial_var.yres ||
var->xoffset || var->nonstd)) {
if (first) {
ERR_MSG("Changing the video mode is not supported.\n");
first = 0;
}
return -EINVAL;
}And then insert a line so it looks like this:
if (FIXED_MODE(dinfo) &&
(change_var ||
var->yres_virtual > dinfo->initial_var.yres_virtual ||
var->yres_virtual < dinfo->initial_var.yres ||
var->xoffset || var->nonstd)) {
if (first) {
ERR_MSG("Changing the video mode is not supported.\n");
first = 0;
}
intelfb_set_par(info); /* insert this line */
return -EINVAL;
}Quoted 6 lines · David Härdeman
Quoted 2 lines · Antonino A. Daplas
Quoted 1 line · David Härdeman
intelfb: Changing the video mode is not supported.
Suggestions?
Ignore the hack I mentioned in the previous thread. Try this patch instead.
Tony
drivers/video/intelfb/intelfbdrv.c +8 -0
@@ -1283,6 +1283,14 @@ intelfb_set_par(struct fb_info *info)if (FIXED_MODE (dinfo)) {ERR_MSG ("Changing the video mode is not supported.\n" ); + +/* +* We need to at least initialize the 2D engine even +* if changing the mode is not allowed +*/ +if (ACCEL (dinfo, info)) +intelfbhw_2d_start (dinfo); +return -EINVAL ; }
Quoted 1 line · Antonino A. Daplas
Ignore the hack I mentioned in the previous thread. Try this patch instead.
Didn't help, the messages remain the same (tried with vga=0x318 and video=intelfb:1024x768-32@60,mtrr=0 vga=0x318).
Boot:
intelfb: 00:02.0: Intel(R) 852GM, aperture size 128MB, stolen memory 8060kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Initial video mode is 1024x768-32@60.
intelfb: Changing the video mode is not supported.
Console: switching to colour frame buffer device 128x48
Starting X:
mtrr: base(0xe0020000) is not aligned on a size(0x300000) boundary [drm:drm_unlock] *ERROR* Process 2976 using kernel context 0
First time I switch from X to VC:
intelfb: Changing the video mode is not supported.
intelfb: ring buffer : space: 6024 wanted 65472
intelfb: lockup - turning off hardware acceleration
Other suggestions?
//David
Quoted 15 lines · David Härdeman
Quoted 2 lines · Antonino A. Daplas
Ignore the hack I mentioned in the previous thread. Try this patch instead.
Didn't help, the messages remain the same (tried with vga=0x318 and video=intelfb:1024x768-32@60,mtrr=0 vga=0x318).
Boot:
intelfb: 00:02.0: Intel(R) 852GM, aperture size 128MB, stolen memory 8060kB
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Initial video mode is 1024x768-32@60.
intelfb: Changing the video mode is not supported.
Console: switching to colour frame buffer device 128x48
Quoted 9 lines
Starting X:
mtrr: base(0xe0020000) is not aligned on a size(0x300000) boundary [drm:drm_unlock] *ERROR* Process 2976 using kernel context 0First time I switch from X to VC:
intelfb: Changing the video mode is not supported.
intelfb: ring buffer : space: 6024 wanted 65472
intelfb: lockup - turning off hardware acceleration
Well, intelfb is at the mercy of X if it's in 'fixed mode'.
Quoted 1 line
Other suggestions?
I'm adding Sylvain, the intelfb maintainer, to the CC list.
How about this one? It also resets the ringbuffer before re-initializing it again.
Tony
drivers/video/intelfb/intelfbdrv.c +10 -0
@@ -1283,6 +1283,16 @@ intelfb_set_par(struct fb_info *info)if (FIXED_MODE (dinfo)) {ERR_MSG ("Changing the video mode is not supported.\n" ); + +/* +* We need to at least initialize the 2D engine even +* if changing the mode is not allowed +*/ +if (ACCEL (dinfo, info)) { +intelfbhw_2d_stop (dinfo); +intelfbhw_2d_start (dinfo); + } +return -EINVAL ; }
Quoted 7 lines · Antonino A. Daplas
Quoted 5 lines · David Härdeman
First time I switch from X to VC:
intelfb: Changing the video mode is not supported.
intelfb: ring buffer : space: 6024 wanted 65472
intelfb: lockup - turning off hardware acceleration
Quoted 8 lines
Well, intelfb is at the mercy of X if it's in 'fixed mode'.
Quoted 1 line
Other suggestions?
I'm adding Sylvain, the intelfb maintainer, to the CC list.
How about this one? It also resets the ringbuffer before re-initializing it again.
That made no change at all unfortunately, the messages are exactly the same as before...
//David
Quoted 12 lines · David Härdeman
Quoted 11 lines · Antonino A. Daplas
Quoted 5 lines · David Härdeman
First time I switch from X to VC:
intelfb: Changing the video mode is not supported.
intelfb: ring buffer : space: 6024 wanted 65472
intelfb: lockup - turning off hardware accelerationWell, intelfb is at the mercy of X if it's in 'fixed mode'.
Quoted 1 line
Other suggestions?
Quoted 7 lines
Quoted 4 lines
I'm adding Sylvain, the intelfb maintainer, to the CC list.
How about this one? It also resets the ringbuffer before re-initializing it again.
That made no change at all unfortunately, the messages are exactly the same as before...
That's the limit to what I can do (I don't have the hardware) and let's just wait for the maintainer to respond.
For now, you can eliminate that message by turning acceleration off.
video=intelfb:accel:0
Another solution is to disable direct rendering, but I don't think you want that.
Tony
PS: I saw this problem before with i810fb, and this is because the i810 driver of X and i810fb shared the same ringbuffer. But the i810 chipset has 2 ringbuffers, so I just made i810fb use the ringbuffer that is not touched by X/DRI. (I don't know the status now since I don't have this chipset anymore). That is one solution.