kernel Doc/ URL corrections
Subsystems (5)
From: Randy Dunlap <[email protected]>
Correct lots of URLs in Documentation/
Also a few minor whitespace cleanups and typo/spello fixes. Sadly there are still a lot of bad URLs remaining.
Signed-off-by Randy Dunlap <[email protected]>
---
Documentation/arm/VFP/release-notes.txt | 2 Documentation/dvb/faq.txt | 1 Documentation/filesystems/affs.txt | 2 Documentation/filesystems/ext2.txt | 3 - Documentation/floppy.txt | 10 +-- Documentation/input/iforce-protocol.txt | 1 Documentation/ioctl-number.txt | 2 Documentation/kernel-docs.txt | 60 ++++++++++++---------- Documentation/mca.txt | 2 Documentation/networking/driver.txt | 5 - Documentation/networking/iphase.txt | 2 Documentation/networking/irda.txt | 8 -- Documentation/networking/ray_cs.txt | 3 - Documentation/networking/vortex.txt | 28 +++++----- Documentation/power/pci.txt | 2 Documentation/scsi/ibmmca.txt | 4 - Documentation/usb/ibmcam.txt | 4 - Documentation/usb/ov511.txt | 4 - Documentation/usb/rio.txt | 6 +- Documentation/video4linux/zr36120.txt | 7 +- 20 files changed, 79 insertions(+), 77 deletions(-)
Documentation/arm/VFP/release-notes.txt renamed from Documentation/arm/VFP/release-notes.txt~docco_urls +1 -1
@@ -12,7 +12,7 @@ This release has been validated against John R. Hauser using the TestFloat-2a test suite. Details of this library and test suite can be found at: - http://www.cs.berkeley.edu/~jhauser/arithmetic/SoftFloat.html + http://www.jhauser.us/arithmetic/SoftFloat.html The operations which have been tested with this package are:
Documentation/dvb/faq.txt renamed from Documentation/dvb/faq.txt~docco_urls +0 -1
@@ -60,7 +60,6 @@ Some very frequently asked questions abo Metzler Bros. DVB development; alternate drivers and DVB utilities, include dvb-mpegtools and tuxzap. - http://www.linuxstb.org/ http://sourceforge.net/projects/dvbtools/ Dave Chapman's dvbtools package, including dvbstream and dvbtune
Documentation/filesystems/affs.txt renamed from Documentation/filesystems/affs.txt~docco_urls +1 -1
@@ -216,4 +216,4 @@ due to an incompatibility with the Amiga If you are interested in an Amiga Emulator for Linux, look at -http://www-users.informatik.rwth-aachen.de/~crux/uae.html +http://www.freiburg.linux.de/~uae/
Documentation/filesystems/ext2.txt renamed from Documentation/filesystems/ext2.txt~docco_urls +1 -2
@@ -369,9 +369,8 @@ The kernel source file:/usr/src/linux/fs e2fsprogs (e2fsck) http://e2fsprogs.sourceforge.net/ Design & Implementation http://e2fsprogs.sourceforge.net/ext2intro.html Journaling (ext3) ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/ -Hashed Directories http://kernelnewbies.org/~phillips/htree/ Filesystem Resizing http://ext2resize.sourceforge.net/ -Compression (*) http://www.netspace.net.au/~reiter/e2compr/ +Compression (*) http://e2compr.sourceforge.net/ Implementations for: Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
Documentation/input/iforce-protocol.txt renamed from Documentation/input/iforce-protocol.txt~docco_urls +0 -1
@@ -247,7 +247,6 @@ Check www.immerse.com for Immersion Stud ** Author of this document ** Johann Deneux <[email protected]> -Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/ Additions by Vojtech Pavlik.
Documentation/networking/driver.txt renamed from Documentation/networking/driver.txt~docco_urls +1 -4
@@ -1,7 +1,4 @@ -Documents about softnet driver issues in general can be found -at: - - http://www.firstfloor.org/~andi/softnet/ +Document about softnet driver issues Transmit path guidelines:
Documentation/networking/iphase.txt renamed from Documentation/networking/iphase.txt~docco_urls +1 -1
@@ -22,7 +22,7 @@ The features and limitations of this dri - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, including x575 (OC3, control memory 128K , 512K and packet memory 128K, 512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See - http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM + http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0 for details. - Only x86 platforms are supported. - SMP is supported.
Documentation/networking/irda.txt renamed from Documentation/networking/irda.txt~docco_urls +2 -6
@@ -3,12 +3,8 @@ of the IrDA Utilities. More detailed inf programs can be found on http://irda.sourceforge.net/ For more information about how to use the IrDA protocol stack, see the -Linux Infared HOWTO (http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html) -by Werner Heuser <[email protected]> +Linux Infrared HOWTO by Werner Heuser <[email protected]>: +<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html> There is an active mailing list for discussing Linux-IrDA matters called [email protected] - - - -
Documentation/networking/ray_cs.txt renamed from Documentation/networking/ray_cs.txt~docco_urls +1 -2
@@ -29,8 +29,7 @@ with nondefault parameters, they can be will find them all. Information on card services is available at: - ftp://hyper.stanford.edu/pub/pcmcia/doc - http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html + http://pcmcia-cs.sourceforge.net/ Card services user programs are still required for PCMCIA devices.
Documentation/networking/vortex.txt renamed from Documentation/networking/vortex.txt~docco_urls +14 -14
@@ -11,7 +11,7 @@ The driver was written by Donald Becker Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: - Andrew Morton <[email protected]> + Andrew Morton <[email protected]> Netdev mailing list <[email protected]> Linux kernel mailing list <[email protected]>
@@ -274,24 +274,24 @@ Details of the device driver implementat Additional documentation is available at Don Becker's Linux Drivers site: - http://www.scyld.com/network/vortex.html + http://www.scyld.com/vortex.html Donald Becker's driver development site: - http://www.scyld.com/network + http://www.scyld.com/network.html Donald's vortex-diag program is useful for inspecting the NIC's state: - http://www.scyld.com/diag/#pci-diags + http://www.scyld.com/ethercard_diag.html Donald's mii-diag program may be used for inspecting and manipulating the NIC's Media Independent Interface subsystem: - http://www.scyld.com/diag/#mii-diag + http://www.scyld.com/ethercard_diag.html#mii-diag Donald's wake-on-LAN page: - http://www.scyld.com/expert/wake-on-lan.html + http://www.scyld.com/wakeonlan.html 3Com's documentation for many NICs, including the ones supported by this driver is available at
@@ -305,7 +305,7 @@ this driver is available at Driver updates and a detailed changelog for the modifications which were made for the 2.3/2,4 series kernel is available at - http://www.uow.edu.au/~andrewm/linux/#3c59x-2.3 + http://www.zip.com.au/~akpm/linux/#3c59x-bc Autonegotiation notes
@@ -434,8 +434,8 @@ steps you should take: send all logs to the maintainer. 3) Download you card's diagnostic tool from Donald - Backer's website http://www.scyld.com/diag. Download - mii-diag.c as well. Build these. + Becker's website <http://www.scyld.com/ethercard_diag.html>. + Download mii-diag.c as well. Build these. a) Run 'vortex-diag -aaee' and 'mii-diag -v' when the card is working correctly. Save the output.
@@ -443,8 +443,8 @@ steps you should take: b) Run the above commands when the card is malfunctioning. Send both sets of output. -Finally, please be patient and be prepared to do some work. You may end up working on -this problem for a week or more as the maintainer asks more questions, asks for more -tests, asks for patches to be applied, etc. At the end of it all, the problem may even -remain unresolved. - +Finally, please be patient and be prepared to do some work. You may +end up working on this problem for a week or more as the maintainer +asks more questions, asks for more tests, asks for patches to be +applied, etc. At the end of it all, the problem may even remain +unresolved.
Documentation/power/pci.txt renamed from Documentation/power/pci.txt~docco_urls +1 -1
@@ -335,5 +335,5 @@ this on the whole. PCI Local Bus Specification PCI Bus Power Management Interface Specification - http://pcisig.org + http://www.pcisig.com
Documentation/scsi/ibmmca.txt renamed from Documentation/scsi/ibmmca.txt~docco_urls +2 -2
@@ -1108,7 +1108,7 @@ A: You have to activate MCA bus support, first. Q: Where can I find the latest info about this driver? A: See the file MAINTAINERS for the current WWW-address, which offers - updates, info and Q/A lists. At this files' origin, the webaddress + updates, info and Q/A lists. At this file's origin, the webaddress was: http://www.uni-mainz.de/~langm000/linux.html Q: My SCSI-adapter is not recognized by the driver, what can I do? A: Just force it to be recognized by kernel parameters. See section 5.1.
@@ -1248,7 +1248,7 @@ -------------------- The address of the IBM SCSI-subsystem supporting WWW-page is: - http://www.uni-mainz.de/~langm000/linux.html + http://www.staff.uni-mainz.de/mlang/linux.html Here you can find info about the background of this driver, patches, troubleshooting support, news and a bugreport form. Please check that
Documentation/usb/ibmcam.txt renamed from Documentation/usb/ibmcam.txt~docco_urls +2 -2
@@ -28,8 +28,8 @@ SUPPORTED CAMERAS: Xirlink "C-It" camera, also known as "IBM PC Camera". The device uses proprietary ASIC (and compression method); it is manufactured by Xirlink. See http://www.xirlink.com/ -http://www.ibmpccamera.com or http://www.c-itnow.com/ for -details and pictures. +(renamed to http://www.veo.com), http://www.ibmpccamera.com, +or http://www.c-itnow.com/ for details and pictures. This very chipset ("X Chip", as marked at the factory) is used in several other cameras, and they are supported
Documentation/usb/ov511.txt renamed from Documentation/usb/ov511.txt~docco_urls +2 -2
@@ -22,8 +22,8 @@ WHAT YOU NEED: http://www.ovt.com/omniusbp.html - A Video4Linux compatible frame grabber program (I recommend vidcat and xawtv) - vidcat is part of the w3cam package: http://www.hdk-berlin.de/~rasca/w3cam/ - xawtv is available at: http://www.in-berlin.de/User/kraxel/xawtv.html + vidcat is part of the w3cam package: http://mpx.freeshell.net/ + xawtv is available at: http://linux.bytesex.org/xawtv/ HOW TO USE IT:
Documentation/usb/rio.txt renamed from Documentation/usb/rio.txt~docco_urls +3 -3
@@ -46,9 +46,9 @@ Contact information: -------------------- The main page for the project is hosted at sourceforge.net in the following - address: http://rio500.sourceforge.net You can also go to the sourceforge - project page at: http://sourceforge.net/project/?group_id=1944 There is - also a mailing list: [email protected] + URL: <http://rio500.sourceforge.net>. You can also go to the project's + sourceforge home page at: <http://sourceforge.net/projects/rio500/>. + There is also a mailing list: [email protected] Authors: -------
Documentation/video4linux/zr36120.txt renamed from Documentation/video4linux/zr36120.txt~docco_urls +5 -2
@@ -76,8 +76,11 @@ activates the GRAB bit. A few ms later t the zoran starts to work on a new and freshly broadcasted frame.... For pointers I used the specs of both chips. Below are the URLs: - http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf - http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf + http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf + http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf +Some alternatives for the Philips SAA 7110 datasheet are: + http://www.datasheetcatalog.com/datasheets_pdf/S/A/A/7/SAA7110.shtml + http://www.datasheetarchive.com/search.php?search=SAA7110&sType=part The documentation has very little on absolute numbers or timings needed for the various modes/resolutions, but there are other
Documentation/floppy.txt renamed from Documentation/floppy.txt~docco_urls +5 -5
@@ -4,7 +4,7 @@ FAQ list: ========= A FAQ list may be found in the fdutils package (see below), and also -at http://fdutils.linux.lu/FAQ.html +at <http://fdutils.linux.lu/faq.html>. LILO configuration options (Thinkpad users, read this)
@@ -217,10 +217,10 @@ It also contains additional documentatio The latest version can be found at fdutils homepage: http://fdutils.linux.lu -The fdutils-5.4 release can be found at: - http://fdutils.linux.lu/fdutils-5.4.src.tar.gz - http://www.tux.org/pub/knaff/fdutils/fdutils-5.4.src.tar.gz - ftp://metalab.unc.edu/pub/Linux/utils/disk-management/fdutils-5.4.src.tar.gz +The fdutils releases can be found at: + http://fdutils.linux.lu/download.html + http://www.tux.org/pub/knaff/fdutils/ + ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ Reporting problems about the floppy driver ==========================================
Documentation/mca.txt renamed from Documentation/mca.txt~docco_urls +1 -1
@@ -252,7 +252,7 @@ their names here, but I don't have a lis home page (URL below) for a perpetually out-of-date list. ===================================================================== -MCA Linux Home Page: http://glycerine.itsmm.uni.edu/mca/ +MCA Linux Home Page: http://www.dgmicro.com/mca/ Christophe Beauregard [email protected]
Documentation/ioctl-number.txt renamed from Documentation/ioctl-number.txt~docco_urls +1 -1
@@ -133,7 +133,7 @@ Code Seq# Include File Comments 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system <http://mikonos.dia.unisa.it/tcfs> 'l' 40-7F linux/udf_fs_i.h in development: - <http://www.trylinux.com/projects/udf/> + <http://sourceforge.net/projects/linux-udf/> 'm' all linux/mtio.h conflict! 'm' all linux/soundcard.h conflict! 'm' all linux/synclink.h conflict!
Documentation/kernel-docs.txt renamed from Documentation/kernel-docs.txt~docco_urls +35 -25
143 lines not on this page · raw message
---