Skip to contentSkip to conversation

PATCH Matthew Wilcox 2 participants 3 messages Nov 21, 2005 PCI

lore
Share & tools
lore
#0 lore raw

Subject: [PATCH 2/5] Introduce PCI_NO_IRQ and pci_valid_irq()

Explicitly initialise pci_dev->irq with PCI_NO_IRQ, allowing us to change the value of PCI_NO_IRQ once all drivers have been audited.

---

 drivers/pci/probe.c |    7 +++++--
 include/linux/pci.h |    9 +++++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

applies-to: 48ad7d3f9b055a9d4c1a1ab1f6dd0a584cfed99c 53424f050aff8200f80f4d3edf9af7b7f085e6f6

drivers/pci/probe.c +5 -2
index fce2cb2..35ba70b 100644
@@ -571,9 +571,12 @@ static void pci_read_irq(struct pci_dev 
 	unsigned char irq;
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
-	if (irq)
+	if (irq) {
 		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-	dev->irq = irq;
+		dev->irq = irq;
+	} else {
+		dev->irq = PCI_NO_IRQ;
+	}
 }
 
 /**
include/linux/pci.h +9 -0
index de690ca..69cdd00 100644
@@ -140,6 +140,15 @@ struct pci_dev {
 	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
 };
 
+/*
+ * The PCI subsystem has traditionally filled in 0 when no interrupt has been
+ * assigned.  While we should move to using NO_IRQ instead, many drivers
+ * remain to be converted.  Once all drivers are using PCI_NO_IRQ, switching
+ * over should be a simple search-and-replace.
+ */
+#define PCI_NO_IRQ		0
+#define pci_valid_irq(irq)	(irq != PCI_NO_IRQ)
+
 #define pci_dev_g(n) list_entry(n, struct pci_dev, global_list)
 #define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list)
 #define	to_pci_dev(n) container_of(n, struct pci_dev, dev)

---
0.99.8.GIT

#1 lore raw

Re: [PATCH 2/5] Introduce PCI_NO_IRQ and pci_valid_irq()

Quoted 2 lines · Matthew Wilcox

Explicitly initialise pci_dev->irq with PCI_NO_IRQ, allowing us to change the value of PCI_NO_IRQ once all drivers have been audited.

And what will the value of PCI_NO_IRQ going to be?

thanks,

greg k-h

#2 lore raw

Re: [PATCH 2/5] Introduce PCI_NO_IRQ and pci_valid_irq()

Quoted 5 lines · Greg KH
Quoted 2 lines · Matthew Wilcox

Explicitly initialise pci_dev->irq with PCI_NO_IRQ, allowing us to change the value of PCI_NO_IRQ once all drivers have been audited.

And what will the value of PCI_NO_IRQ going to be?

It's actually going to go away; s/PCI_NO_IRQ/NO_IRQ/g. I didn't want to break all the drivers immediately.