powerpc: Add support for building uImages
PATCH 1/1 powerpc: Add support for building uImages
powerpc: Add support for building uImages
Add support to build a kernel image bootable by u-boot. Most of the makefile foo is taken from arch/ppc/boot/images/Makefile
---
commit 74dc65dbfa00bb69929c34da2ae788868aaae399
tree 2344f27b9a84a2c3212c4dcc070f6b0cebb906ef
parent 8573cff663f4df7af110c9781ccefd6b12522a2f
author Kumar Gala <[email protected]> Wed, 23 Nov 2005 12:44:01 -0600 committer Kumar Gala <[email protected]> Wed, 23 Nov 2005 12:44:01 -0600
arch/powerpc/Makefile | 2 +- arch/powerpc/boot/Makefile | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 1 deletions(-)
arch/powerpc/Makefile +1 -1
@@ -151,7 +151,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc # All the instructions talk about "make bzImage". bzImage: zImage -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm +BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage .PHONY: $(BOOT_TARGETS)
arch/powerpc/boot/Makefile +30 -0
@@ -143,6 +143,36 @@ $(obj)/zImage.initrd: $(obj)/zImage.init @cp -f $< $@ $(call if_changed,addnote) +#----------------------------------------------------------- +# build u-boot images +#----------------------------------------------------------- +quiet_cmd_mygzip = GZIP $@ +cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@ + +quiet_cmd_objbin = OBJCOPY $@ + cmd_objbin = $(OBJCOPY) -O binary $< $@ + +quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ + -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ + -d $< $@ + +MKIMAGE := $(srctree)/scripts/mkuboot.sh +targets += uImage +extra-y += vmlinux.bin vmlinux.gz + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objbin) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,mygzip) + +$(obj)/uImage: $(obj)/vmlinux.gz + $(Q)rm -f $@ + $(call if_changed,uimage) + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi + install: $(CONFIGURE) $(BOOTIMAGE) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)"
arch/powerpc/boot/Makefile $(obj)/zImage.initrd: $(obj)/zImage.init · line 174
Quoted 6 lines · Kumar Gala
arch/powerpc/boot/Makefile +6
-0+ +$(obj)/uImage: $(obj)/vmlinux.gz + $(Q)rm -f $@ + $(call if_changed,uimage) + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
The above is suboptimal. The $(call if_changed,uimage) will execute $(cmd_uimage) if 1) prerequisites has changed or 2) the command to execute has changed.
In the above case 1) is always true, otherwise we would not reach the statement. So change it to $(call cmd,uimage) is the correct way.
The 'bug' is also present in ppc/boot/images
Sam
Quoted 14 lines · Sam Ravnborg
arch/powerpc/boot/Makefile $(obj)/zImage.initrd: $(obj)/zImage.init · line 174
Quoted 6 lines · Kumar Gala
arch/powerpc/boot/Makefile +6
-0+ +$(obj)/uImage: $(obj)/vmlinux.gz + $(Q)rm -f $@ + $(call if_changed,uimage) + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fiThe above is suboptimal. The $(call if_changed,uimage) will execute $(cmd_uimage) if 1) prerequisites has changed or 2) the command to execute has changed.
In the above case 1) is always true, otherwise we would not reach the statement. So change it to $(call cmd,uimage) is the correct way.
Quoted 1 line
The 'bug' is also present in ppc/boot/images
thanks. I'll send a follow up patch to fix both cases.
- kumar
PATCH 1/1 powerpc: Add missing vmlinux.bin target
In reply to Kumar GalaWith this patch 'make vmlinux.bin' works. This is needed by some embedded platforms. Kumar already added the routines to actually build the image in arch/powerpc/boot/Makefile.
--
arch/powerpc/Makefile +1 -1
@@ -147,7 +147,7 @@ CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage +BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm uImage vmlinux.bin .PHONY: $(BOOT_TARGETS)