Skip to contentSkip to conversation

aic7xxx crash on data overrun

PATCH? Petr Vandrovec 1 participant 1 message Nov 25, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hello Justin,
I'm not quite sure that this patch is correct thing to do, but
if I do not remove mod_timer() call from ahc_scb_timer_reset then aic7xxx driver commits suicide on error recovery (at least from data overrun). Problem is that scb->io_ctx->eh_timeout.function is NULL at that time and so BUG_ON(!timer->function) in mod_timer fires.

As I was not able to find which function should be invoked in
5 seconds, I just removed this, and it now seems much happier - it correctly recovers from test.

(scsi5:A:0:0): data overrun detected in Data-in phase. Tag == 0x3. (scsi5:A:0:0): Have seen Data Phase. Length = 0. NumSGs = 0. sd 5:0:0:0: Attempting to queue an ABORT message
CDB: 0x12 0x0 0x0 0x0 0xff 0x0
scsi5: At time of recovery, card was not paused

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

Dump Card State Begins <<<<<<<<<<<<<<<<<

scsi5: Dumping Card State in Data-in phase, at SEQADDR 0x16c
...
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> sd 5:0:0:0: Device is active, asserting ATN Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 0x2003
sd 5:0:0:0: Attempting to queue a TARGET RESET message
CDB: 0x12 0x0 0x0 0x0 0xff 0x0
aic7xxx_dev_reset returns 0x2003
Recovery SCB completes

Without patch kernel got killed after 'Recovery SCB completes' appeared with BUG at kernel/timer.c:292.

Patch is for 2.6.15-rc2. Changes in aic7xxx_osm.h are just cleanup - ahc_timer_reset was not used even before, ahc_scb_timer_reset is not used after removing its call from aic7xxx_core.c
Thanks,
Petr Vandrovec

drivers/scsi/aic7xxx/aic7xxx_core.c +0 -5
diff -urdN linux/drivers/scsi/aic7xxx/aic7xxx_core.c linux/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -567,11 +567,6 @@
 			scb->flags |= SCB_SENSE;
 			ahc_qinfifo_requeue_tail(ahc, scb);
 			ahc_outb(ahc, RETURN_1, SEND_SENSE);
-			/*
-			 * Ensure we have enough time to actually
-			 * retrieve the sense.
-			 */
-			ahc_scb_timer_reset(scb, 5 * 1000000);
 			break;
 		}
 		default:
drivers/scsi/aic7xxx/aic7xxx_osm.h +0 -27
diff -urdN linux/drivers/scsi/aic7xxx/aic7xxx_osm.h linux/drivers/scsi/aic7xxx/aic7xxx_osm.h
@@ -234,33 +234,6 @@
 #endif
 #include "aic7xxx.h"
 
-/***************************** Timer Facilities *******************************/
-#define ahc_timer_init init_timer
-#define ahc_timer_stop del_timer_sync
-typedef void ahc_linux_callback_t (u_long);  
-static __inline void ahc_timer_reset(ahc_timer_t *timer, int usec,
-				     ahc_callback_t *func, void *arg);
-static __inline void ahc_scb_timer_reset(struct scb *scb, u_int usec);
-
-static __inline void
-ahc_timer_reset(ahc_timer_t *timer, int usec, ahc_callback_t *func, void *arg)
-{
-	struct ahc_softc *ahc;
-
-	ahc = (struct ahc_softc *)arg;
-	del_timer(timer);
-	timer->data = (u_long)arg;
-	timer->expires = jiffies + (usec * HZ)/1000000;
-	timer->function = (ahc_linux_callback_t*)func;
-	add_timer(timer);
-}
-
-static __inline void
-ahc_scb_timer_reset(struct scb *scb, u_int usec)
-{
-	mod_timer(&scb->io_ctx->eh_timeout, jiffies + (usec * HZ)/1000000);
-}
-
 /***************************** SMP support ************************************/
 #include <linux/spinlock.h>