NIC irq nobody cared ? virtual to physical and DMA questions
Subsystems (2)
Hello List,
This time the questions are different.
Given the following output could anyone please tell me what is wrong ? In explicit what does that mysterious "nobody cared" message mean?
And another stupid question: should DMA for a network card be enabled before or maybe _after_ interrupts get enabled? And... how to convert virtual address to physical one?
Nov 29 21:25:47 debian kernel: atheros: receive init routine called Nov 29 21:25:47 debian kernel: atheros: physical address of RX head is 00000000 Nov 29 21:25:47 debian kernel: atheros: enabling DMA receive. this can crash things supposedly. Nov 29 21:25:47 debian kernel: irq 11: nobody cared (try booting with the "irqpoll" option) Nov 29 21:25:47 debian kernel: [dump_stack+23/32] dump_stack+0x17/0x20 Nov 29 21:25:47 debian kernel: [__report_bad_irq+39/144] __report_bad_irq+0x27/0x90 Nov 29 21:25:47 debian kernel: [note_interrupt+114/192] note_interrupt+0x72/0xc0 Nov 29 21:25:47 debian kernel: [__do_IRQ+200/224] __do_IRQ+0xc8/0xe0 Nov 29 21:25:47 debian kernel: [do_IRQ+80/128] do_IRQ+0x50/0x80 Nov 29 21:25:47 debian kernel: ======================= Nov 29 21:25:47 debian kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20 Nov 29 21:25:47 debian kernel: [do_softirq+115/128] do_softirq+0x73/0x80 Nov 29 21:25:47 debian kernel: ======================= Nov 29 21:25:47 debian kernel: [irq_exit+67/80] irq_exit+0x43/0x50 Nov 29 21:25:47 debian kernel: [do_IRQ+87/128] do_IRQ+0x57/0x80 Nov 29 21:25:47 debian kernel: [common_interrupt+26/32] common_interrupt+0x1a/0x20 Nov 29 21:25:47 debian kernel: [pg0+260065664/1065075712] ath_init+0x30/0x80 [atheros] Nov 29 21:25:47 debian kernel: [dev_open+70/144] dev_open+0x46/0x90 Nov 29 21:25:47 debian kernel: [dev_change_flags+83/288] dev_change_flags+0x53/0x120 Nov 29 21:25:47 debian kernel: [devinet_ioctl+1437/1472] devinet_ioctl+0x59d/0x5c0 Nov 29 21:25:47 debian kernel: [inet_ioctl+166/208] inet_ioctl+0xa6/0xd0 Nov 29 21:25:47 debian kernel: [sock_ioctl+248/592] sock_ioctl+0xf8/0x250 Nov 29 21:25:47 debian kernel: [do_ioctl+40/144] do_ioctl+0x28/0x90 Nov 29 21:25:47 debian kernel: [vfs_ioctl+87/496] vfs_ioctl+0x57/0x1f0 Nov 29 21:25:47 debian kernel: [sys_ioctl+57/96] sys_ioctl+0x39/0x60 Nov 29 21:25:47 debian kernel: [syscall_call+7/11] syscall_call+0x7/0xb Nov 29 21:25:47 debian kernel: handlers: Nov 29 21:25:47 debian kernel: [usb_hcd_irq+0/80] (usb_hcd_irq+0x0/0x50) Nov 29 21:25:47 debian last message repeated 3 times Nov 29 21:25:47 debian kernel: [yenta_interrupt+0/192] (yenta_interrupt+0x0/0xc0) Nov 29 21:25:47 debian kernel: [pg0+260075488/1065075712] (ath_intr+0x0/0x150 [atheros]) Nov 29 21:25:47 debian kernel: Disabling IRQ #11 Nov 29 21:25:47 debian kernel: atheros: interrupts enabled Nov 29 21:25:47 debian kernel: atheros: device up and running
Signature · 2 lines
kind regards, Mateusz Berezecki
Hi,
Quoted 7 lines
This time the questions are different.
Given the following output could anyone please tell me what is wrong ? In explicit what does that mysterious "nobody cared" message mean?
And another stupid question: should DMA for a network card be enabled before or maybe _after_ interrupts get enabled? And... how to convert virtual address to physical one?
The nobody cared error message is reported when a device is raising interrupts while the actual driver has not yet registered the interrupt handler.
The best way to handle this for network drivers (done in rt2x00, which works fine) would be:
1 - Allocate DMA
2 - Registers interrupt handler
3 - Enable device interrupts.
IvD