Skip to contentSkip to conversation

PAT status?

DISCUSSION Jeff Garzik 2 participants 2 messages Nov 29, 2005 – Dec 1, 2005

lore
Share & tools
lore
#0 lore raw

What's the status of PAT support?

I'm interested in that sort of stuff, for use with on-board GPUs such as Intel/VIA/SiS, where system memory is used rather than offboard ram.

Jeff

#1 lore raw

Hi Jeff,

I unfortunately haven't had much time to look at the status of the PAT code I had been working on. there are really 2 steps to the code:

the first is enabling and configuring the PAT registers. this then allows a page table entry define that can be passed to traditional interfaces, such as remap_page_range or change_page_attr. this is pretty simple and we've been using a similar interface in our driver for some time now.

the second part was to make sure we didn't create any cache aliasing via duplicate mappings. this part is a bit more involved and what was holding everything back. I've been meaning to get back to looking at this, but really haven't had the time.

I don't know if you still want to limit the additional of the first step, based on completion of the second step. I can try to set time aside over the next month to try and sync up and take a look at where we stand w/ the cachemap portion of the code. I think there where still issues with gathering/passing in the correct attributes.

Thanks,
Terence

Quoted 10 lines · On Tue, Nov 29, 2005 at 05:22:37PM -0500, [email protected] wrote:

What's the status of PAT support?

I'm interested in that sort of stuff, for use with on-board GPUs such as Intel/VIA/SiS, where system memory is used rather than offboard ram.

Jeff