remove code for WIRELESS_EXT < 18
Subsystems (3)
PATCH 1/1 remove code for WIRELESS_EXT < 18
WIRELESS_EXT < 18 will never be true in the kernel.
Signed-off-by Adrian Bunk <[email protected]>
---
drivers/net/wireless/ipw2100.c | 434 ---------------------- drivers/net/wireless/tiacx/acx_struct.h | 5 drivers/net/wireless/tiacx/common.c | 4 drivers/net/wireless/tiacx/conv.c | 2 drivers/net/wireless/tiacx/ioctl.c | 441 ----------------------- drivers/net/wireless/tiacx/pci.c | 8 drivers/net/wireless/tiacx/usb.c | 6 drivers/net/wireless/tiacx/wlan.c | 2 drivers/net/wireless/tiacx/wlan_compat.h | 9 9 files changed, 1 insertion(+), 910 deletions(-)
drivers/net/wireless/ipw2100.c renamed from drivers/net/wireless/ipw2100.c.old +0 -434
@@ -5735,70 +5735,6 @@return &priv->ieee->stats; } -#if WIRELESS_EXT <18 -/* Support for wpa_supplicant before WE-18, deprecated. */ - -/* following definitions must match definitions in driver_ipw.c */ - -#define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30 - -#define IPW2100_CMD_SET_WPA_PARAM 1 -#define IPW2100_CMD_SET_WPA_IE 2 -#define IPW2100_CMD_SET_ENCRYPTION 3 -#define IPW2100_CMD_MLME 4 - -#define IPW2100_PARAM_WPA_ENABLED 1 -#define IPW2100_PARAM_TKIP_COUNTERMEASURES 2 -#define IPW2100_PARAM_DROP_UNENCRYPTED 3 -#define IPW2100_PARAM_PRIVACY_INVOKED 4 -#define IPW2100_PARAM_AUTH_ALGS 5 -#define IPW2100_PARAM_IEEE_802_1X 6 - -#define IPW2100_MLME_STA_DEAUTH 1 -#define IPW2100_MLME_STA_DISASSOC 2 - -#define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2 -#define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3 -#define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4 -#define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5 -#define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6 -#define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7 - -#define IPW2100_CRYPT_ALG_NAME_LEN 16 - -struct ipw2100_param { -u32 cmd; -u8 sta_addr[ETH_ALEN ]; -union { -struct { -u8 name; -u32 value; - } wpa_param; -struct { -u32 len; -u8 reserved[32 ]; -u8 data[0 ]; - } wpa_ie; -struct { -u32 command; -u32 reason_code; - } mlme; -struct { -u8 alg[IPW2100_CRYPT_ALG_NAME_LEN ]; -u8 set_tx; -u32 err; -u8 idx; -u8 seq[8 ];/* sequence counter (set: RX, get: TX) */ -u16 key_len; -u8 key[0 ]; - } crypt; - - } u; -}; - -/* end of driver_ipw.c code */ -#endif /* WIRELESS_EXT < 18 */ -static int ipw2100_wpa_enable (struct ipw2100_priv *priv,int value) {/* This is called when wpa_supplicant loads and closes the driver
@@ -5807,11 +5743,6 @@return 0 ; } -#if WIRELESS_EXT <18 -#define IW_AUTH_ALG_OPEN_SYSTEM 0x1 -#define IW_AUTH_ALG_SHARED_KEY 0x2 -#endif -static int ipw2100_wpa_set_auth_algs (struct ipw2100_priv *priv,int value) {
@@ -5855,360 +5786,6 @@ipw2100_set_wpa_ie (priv, &frame,0 ); } -#if WIRELESS_EXT <18 -static int ipw2100_wpa_set_param (struct net_device *dev,u8 name,u32 value) -{ -struct ipw2100_priv *priv =ieee80211_priv (dev); -struct ieee80211_crypt_data *crypt; -unsigned long flags; -int ret =0 ; - -switch (name) { -case IPW2100_PARAM_WPA_ENABLED : - ret =ipw2100_wpa_enable (priv, value); -break ; - -case IPW2100_PARAM_TKIP_COUNTERMEASURES : - crypt = priv->ieee->crypt[priv->ieee->tx_keyidx]; -if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags) -break ; - - flags = crypt->ops->get_flags (crypt->priv); - -if (value) - flags |=IEEE80211_CRYPTO_TKIP_COUNTERMEASURES ; -else - flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES ; - - crypt->ops->set_flags (flags, crypt->priv); - -break ; - -case IPW2100_PARAM_DROP_UNENCRYPTED :{ -/* See IW_AUTH_DROP_UNENCRYPTED handling for details */ -struct ieee80211_security sec = { - .flags =SEC_ENABLED , - .enabled = value, - }; - priv->ieee->drop_unencrypted = value; -/* We only change SEC_LEVEL for open mode. Others -* are set by ipw_wpa_set_encryption. -*/ -if (!value) { - sec.flags |=SEC_LEVEL ; - sec.level =SEC_LEVEL_0 ; - }else { - sec.flags |=SEC_LEVEL ; - sec.level =SEC_LEVEL_1 ; - } -if (priv->ieee->set_security) - priv->ieee->set_security (priv->ieee->dev, &sec); -break ; - } - -case IPW2100_PARAM_PRIVACY_INVOKED : - priv->ieee->privacy_invoked = value; -break ; - -case IPW2100_PARAM_AUTH_ALGS : - ret =ipw2100_wpa_set_auth_algs (priv, value); -break ; - -case IPW2100_PARAM_IEEE_802_1X : - priv->ieee->ieee802_1x = value; -break ; - -default : - printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n", - dev->name, name); - ret = -EOPNOTSUPP ; - } - -return ret; -} - -static int ipw2100_wpa_mlme (struct net_device *dev,int command,int reason) -{ - -struct ipw2100_priv *priv =ieee80211_priv (dev); -int ret =0 ; - -switch (command) { -case IPW2100_MLME_STA_DEAUTH : -// silently ignore -break ; - -case IPW2100_MLME_STA_DISASSOC : -ipw2100_disassociate_bssid (priv); -break ; - -default : - printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n", - dev->name, command); - ret = -EOPNOTSUPP ; - } - -return ret; -} - -static int ipw2100_wpa_set_wpa_ie (struct net_device *dev, -struct ipw2100_param *param,int plen) -{ - -struct ipw2100_priv *priv =ieee80211_priv (dev); -struct ieee80211_device *ieee = priv->ieee; -u8 *buf; - -if (!ieee->wpa_enabled) -return -EOPNOTSUPP ; - -if (param->u.wpa_ie.len >MAX_WPA_IE_LEN || - (param->u.wpa_ie.len && param->u.wpa_ie.data ==NULL )) -return -EINVAL ; - -if (param->u.wpa_ie.len) { - buf =kmalloc (param->u.wpa_ie.len,GFP_KERNEL ); -if (buf ==NULL ) -return -ENOMEM ; - -memcpy (buf, param->u.wpa_ie.data, param->u.wpa_ie.len); - -kfree (ieee->wpa_ie); - ieee->wpa_ie = buf; - ieee->wpa_ie_len = param->u.wpa_ie.len; - - }else { -kfree (ieee->wpa_ie); - ieee->wpa_ie =NULL ; - ieee->wpa_ie_len =0 ; - } - -ipw2100_wpa_assoc_frame (priv, ieee->wpa_ie, ieee->wpa_ie_len); - -return 0 ; -} - -/* implementation borrowed from hostap driver */ - -static int ipw2100_wpa_set_encryption (struct net_device *dev, -struct ipw2100_param *param, -int param_len) -{ -int ret =0 ; -struct ipw2100_priv *priv =ieee80211_priv (dev); -struct ieee80211_device *ieee = priv->ieee; -struct ieee80211_crypto_ops *ops; -struct ieee80211_crypt_data **crypt; - -struct ieee80211_security sec = { - .flags =0 , - }; - - param->u.crypt.err =0 ; - param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN -1 ] ='\0' ; - -if (param_len != - (int )((char *)param->u.crypt.key - (char *)param) + - param->u.crypt.key_len) { -IPW_DEBUG_INFO ("Len mismatch %d, %d\n" , param_len, - param->u.crypt.key_len); -return -EINVAL ; - } -if (param->sta_addr[0 ] ==0xff && param->sta_addr[1 ] ==0xff && - param->sta_addr[2 ] ==0xff && param->sta_addr[3 ] ==0xff && - param->sta_addr[4 ] ==0xff && param->sta_addr[5 ] ==0xff ) { -if (param->u.crypt.idx >=WEP_KEYS ) -return -EINVAL ; - crypt = &ieee->crypt[param->u.crypt.idx]; - }else { -return -EINVAL ; - } - - sec.flags |=SEC_ENABLED |SEC_ENCRYPT ; -if (strcmp (param->u.crypt.alg,"none" ) ==0 ) { -if (crypt) { - sec.enabled =0 ; - sec.encrypt =0 ; - sec.level =SEC_LEVEL_0 ; - sec.flags |=SEC_LEVEL ; -ieee80211_crypt_delayed_deinit (ieee, crypt); - } - goto done; - } - sec.enabled =1 ; - sec.encrypt =1 ; - - ops =ieee80211_get_crypto_ops (param->u.crypt.alg); -if (ops ==NULL &&strcmp (param->u.crypt.alg,"WEP" ) ==0 ) { -request_module ("ieee80211_crypt_wep" ); - ops =ieee80211_get_crypto_ops (param->u.crypt.alg); - }else if (ops ==NULL &&strcmp (param->u.crypt.alg,"TKIP" ) ==0 ) { -request_module ("ieee80211_crypt_tkip" ); - ops =ieee80211_get_crypto_ops (param->u.crypt.alg); - }else if (ops ==NULL &&strcmp (param->u.crypt.alg,"CCMP" ) ==0 ) { -request_module ("ieee80211_crypt_ccmp" ); - ops =ieee80211_get_crypto_ops (param->u.crypt.alg); - } -if (ops ==NULL ) { -IPW_DEBUG_INFO ("%s: unknown crypto alg '%s'\n" , - dev->name, param->u.crypt.alg); - param->u.crypt.err =IPW2100_CRYPT_ERR_UNKNOWN_ALG ; - ret = -EINVAL ; - goto done; - } - -if (*crypt ==NULL || (*crypt)->ops != ops) { -struct ieee80211_crypt_data *new_crypt; - -ieee80211_crypt_delayed_deinit (ieee, crypt); - - new_crypt =kzalloc (sizeof (struct ieee80211_crypt_data ),GFP_KERNEL ); -if (new_crypt ==NULL ) { - ret = -ENOMEM ; - goto done; - } - new_crypt->ops = ops; -if (new_crypt->ops &&try_module_get (new_crypt->ops->owner)) - new_crypt->priv = - new_crypt->ops->init (param->u.crypt.idx); - -if (new_crypt->priv ==NULL ) { -kfree (new_crypt); - param->u.crypt.err = -IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED ; - ret = -EINVAL ; - goto done; - } - - *crypt = new_crypt; - } - -if (param->u.crypt.key_len >0 && (*crypt)->ops->set_key && - (*crypt)->ops->set_key (param->u.crypt.key, - param->u.crypt.key_len, param->u.crypt.seq, - (*crypt)->priv) <0 ) { -IPW_DEBUG_INFO ("%s: key setting failed\n" , dev->name); - param->u.crypt.err =IPW2100_CRYPT_ERR_KEY_SET_FAILED ; - ret = -EINVAL ; - goto done; - } - -if (param->u.crypt.set_tx) { - ieee->tx_keyidx = param->u.crypt.idx; - sec.active_key = param->u.crypt.idx; - sec.flags |=SEC_ACTIVE_KEY ; - } - -if (ops->name !=NULL ) { - -if (strcmp (ops->name,"WEP" ) ==0 ) { -memcpy (sec.keys[param->u.crypt.idx], - param->u.crypt.key, param->u.crypt.key_len); - sec.key_sizes[param->u.crypt.idx] = - param->u.crypt.key_len; - sec.flags |= (1 << param->u.crypt.idx); - sec.flags |=SEC_LEVEL ; - sec.level =SEC_LEVEL_1 ; - }else if (strcmp (ops->name,"TKIP" ) ==0 ) { - sec.flags |=SEC_LEVEL ; - sec.level =SEC_LEVEL_2 ; - }else if (strcmp (ops->name,"CCMP" ) ==0 ) { - sec.flags |=SEC_LEVEL ; - sec.level =SEC_LEVEL_3 ; - } - } - done: -if (ieee->set_security) - ieee->set_security (ieee->dev, &sec); - -/* Do not reset port if card is in Managed mode since resetting will -* generate new IEEE 802.11 authentication which may end up in looping -* with IEEE 802.1X. If your hardware requires a reset after WEP -* configuration (for example... Prism2), implement the reset_port in -* the callbacks structures used to initialize the 802.11 stack. */ -if (ieee->reset_on_keychange && - ieee->iw_mode !=IW_MODE_INFRA && - ieee->reset_port && ieee->reset_port (dev)) { -IPW_DEBUG_INFO ("%s: reset_port failed\n" , dev->name); - param->u.crypt.err =IPW2100_CRYPT_ERR_CARD_CONF_FAILED ; -return -EINVAL ; - } - -return ret; -} - -static int ipw2100_wpa_supplicant (struct net_device *dev,struct iw_point *p) -{ - -struct ipw2100_param *param; -int ret =0 ; - -IPW_DEBUG_IOCTL ("wpa_supplicant: len=%d\n" , p->length); - -if (p->length <sizeof (struct ipw2100_param ) || !p->pointer) -return -EINVAL ; - - param = (struct ipw2100_param *)kmalloc (p->length,GFP_KERNEL ); -if (param ==NULL ) -return -ENOMEM ; - -if (copy_from_user (param, p->pointer, p->length)) { -kfree (param); -return -EFAULT ; - } - -switch (param->cmd) { - -case IPW2100_CMD_SET_WPA_PARAM : - ret =ipw2100_wpa_set_param (dev, param->u.wpa_param.name, - param->u.wpa_param.value); -break ; - -case IPW2100_CMD_SET_WPA_IE : - ret =ipw2100_wpa_set_wpa_ie (dev, param, p->length); -break ; - -case IPW2100_CMD_SET_ENCRYPTION : - ret =ipw2100_wpa_set_encryption (dev, param, p->length); -break ; - -case IPW2100_CMD_MLME : - ret =ipw2100_wpa_mlme (dev, param->u.mlme.command, - param->u.mlme.reason_code); -break ; - -default : - printk(KERN_ERR DRV_NAME -": %s: Unknown WPA supplicant request: %d\n" , dev->name, - param->cmd); - ret = -EOPNOTSUPP ; - - } - -if (ret ==0 &©_to_user (p->pointer, param, p->length)) - ret = -EFAULT ; - -kfree (param); -return ret; -} - -static int ipw2100_ioctl (struct net_device *dev,struct ifreq *rq,int cmd) -{ -struct iwreq *wrq = (struct iwreq *)rq; -int ret =-1 ; -switch (cmd) { -case IPW2100_IOCTL_WPA_SUPPLICANT : - ret =ipw2100_wpa_supplicant (dev, &wrq->u.data); -return ret; - -default : -return -EOPNOTSUPP ; - } - -return -EOPNOTSUPP ; -} -#endif /* WIRELESS_EXT < 18 */ -static void ipw_ethtool_get_drvinfo (struct net_device *dev,struct ethtool_drvinfo *info) {
@@ -6337,9 +5914,6 @@ dev->open = ipw2100_open; dev->stop = ipw2100_close; dev->init = ipw2100_net_init; -#if WIRELESS_EXT <18 - dev->do_ioctl = ipw2100_ioctl; -#endif dev->get_stats = ipw2100_stats; dev->ethtool_ops = &ipw2100_ethtool_ops; dev->tx_timeout = ipw2100_tx_timeout;
@@ -7852,7 +7426,6 @@return 0 ; } -#if WIRELESS_EXT >17 /* * WE-18 WPA support */
@@ -8114,7 +7687,6 @@ }return 0 ; } -#endif /* WIRELESS_EXT > 17 */ /* *
@@ -8347,11 +7919,7 @@NULL ,/* SIOCWIWTHRSPY */ ipw2100_wx_set_wap,/* SIOCSIWAP */ ipw2100_wx_get_wap,/* SIOCGIWAP */ -#if WIRELESS_EXT > 17 ipw2100_wx_set_mlme,/* SIOCSIWMLME */ -#else -NULL ,/* -- hole -- */ -#endifNULL ,/* SIOCGIWAPLIST -- deprecated */ ipw2100_wx_set_scan,/* SIOCSIWSCAN */ ipw2100_wx_get_scan, /* SIOCGIWSCAN */
@@ -8375,7 +7943,6 @@ ipw2100_wx_get_encode,/* SIOCGIWENCODE */ ipw2100_wx_set_power,/* SIOCSIWPOWER */ ipw2100_wx_get_power,/* SIOCGIWPOWER */ -#if WIRELESS_EXT > 17NULL ,/* -- hole -- */ NULL ,/* -- hole -- */ ipw2100_wx_set_genie, /* SIOCSIWGENIE */
@@ -8385,7 +7952,6 @@ ipw2100_wx_set_encodeext,/* SIOCSIWENCODEEXT */ ipw2100_wx_get_encodeext,/* SIOCGIWENCODEEXT */ NULL, /* SIOCSIWPMKSA */ -#endif };#define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
drivers/net/wireless/tiacx/acx_struct.h renamed from drivers/net/wireless/tiacx/acx_struct.h.old +1 -4
@@ -1053,9 +1053,8 @@* the struct net_device. */ /*** Device statistics ***/ struct net_device_stats stats;/* net device statistics */ -#ifdef WIRELESS_EXT struct iw_statistics wstats;/* wireless statistics */ -#endif +/*** Power managment ***/ struct pm_dev *pm;/* PM crap */
@@ -1103,9 +1102,7 @@u8 scan_rate;u16 scan_duration;u16 scan_probe_delay; -#if WIRELESS_EXT >15 struct iw_spy_data spy_data;/* FIXME: needs to be implemented! */ -#endif /*** Wireless network settings ***/ /* copy of the device address (ifconfig hw ether) that we actually use
drivers/net/wireless/tiacx/common.c renamed from drivers/net/wireless/tiacx/common.c.old +0 -4
@@ -46,9 +46,7 @@#include <linux/wireless.h> #include <linux/pm.h> #include <linux/vmalloc.h> -#if WIRELESS_EXT >=13 #include <net/iw_handler.h> -#endif /* WE >= 13 */ #include "acx.h"
@@ -2707,7 +2705,6 @@acxlog (L_ASSOC ,"%s(%d):%s\n" , __func__, new_status,acx_get_status_name (new_status)); -#if WIRELESS_EXT >13 /* wireless_send_event() and SIOCGIWSCAN */ /* wireless_send_event never sleeps */ if (ACX_STATUS_4_ASSOCIATED == new_status) {union iwreq_data wrqu;
@@ -2729,7 +2726,6 @@ wrqu.ap_addr.sa_family =ARPHRD_ETHER ;wireless_send_event (priv->netdev,SIOCGIWAP , &wrqu,NULL ); } -#endif priv->status = new_status;
drivers/net/wireless/tiacx/conv.c renamed from drivers/net/wireless/tiacx/conv.c.old +0 -2
@@ -36,9 +36,7 @@#include <linux/if_arp.h> #include <linux/etherdevice.h> #include <linux/wireless.h> -#if WIRELESS_EXT >=13 #include <net/iw_handler.h> -#endif #include "acx.h"
drivers/net/wireless/tiacx/ioctl.c renamed from drivers/net/wireless/tiacx/ioctl.c.old +0 -441
500 lines not on this page · raw message
drivers/net/wireless/tiacx/pci.c renamed from drivers/net/wireless/tiacx/pci.c.old +0 -8
@@ -45,9 +45,7 @@#include <linux/if_arp.h> #include <linux/rtnetlink.h> #include <linux/wireless.h> -#if WIRELESS_EXT >=13 #include <net/iw_handler.h> -#endif #include <linux/netdevice.h> #include <linux/ioport.h> #include <linux/pci.h>
@@ -1820,11 +1818,7 @@ dev->hard_start_xmit = &acx_i_start_xmit; dev->get_stats = &acx_e_get_stats; dev->get_wireless_stats = &acx_e_get_wireless_stats; -#if WIRELESS_EXT >=13 dev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -#else - dev->do_ioctl = &acx_e_ioctl_old; -#endif dev->set_multicast_list = &acxpci_i_set_multicast_list; dev->tx_timeout = &acxpci_i_tx_timeout; dev->change_mtu = &acx_e_change_mtu;
@@ -3842,7 +3836,6 @@ r100 = txdesc->u.r1.rate; r111 = txdesc->u.r2.rate111; -#if WIRELESS_EXT >13 /* wireless_send_event() and IWEVTXDROP are WE13 */ /* need to check for certain error conditions before we * clean the descriptor: we still need valid descr data here */ if (unlikely (0x30 & error)) {
@@ -3857,7 +3850,6 @@MAC_COPY (wrqu.addr.sa_data, hdr->a1);wireless_send_event (priv->netdev,IWEVTXDROP , &wrqu,NULL ); } -#endif /* ...and free the desc */ txdesc->error =0 ; txdesc->ack_failures =0 ;
drivers/net/wireless/tiacx/usb.c renamed from drivers/net/wireless/tiacx/usb.c.old +0 -6
@@ -61,9 +61,7 @@#include <linux/rtnetlink.h> #include <linux/etherdevice.h> #include <linux/wireless.h> -#if WIRELESS_EXT >=13 #include <net/iw_handler.h> -#endif #include <linux/vmalloc.h> #include "acx.h"
@@ -871,11 +869,7 @@ dev->hard_start_xmit = (void *)&acx_i_start_xmit; dev->get_stats = (void *)&acx_e_get_stats; dev->get_wireless_stats = (void *)&acx_e_get_wireless_stats; -#if WIRELESS_EXT >=13 dev->wireless_handlers = (struct iw_handler_def *)&acx_ioctl_handler_def; -#else - dev->do_ioctl = (void *)&acx_e_ioctl_old; -#endif dev->set_multicast_list = (void *)&acx100usb_i_set_rx_mode;#ifdef HAVE_TX_TIMEOUT dev->tx_timeout = &acx100usb_i_tx_timeout;
drivers/net/wireless/tiacx/wlan.c renamed from drivers/net/wireless/tiacx/wlan.c.old +0 -2
@@ -43,9 +43,7 @@#include <linux/types.h> #include <linux/if_arp.h> #include <linux/wireless.h> -#if WIRELESS_EXT >=13 #include <net/iw_handler.h> -#endif #include "acx.h"
drivers/net/wireless/tiacx/wlan_compat.h renamed from drivers/net/wireless/tiacx/wlan_compat.h.old +0 -9
@@ -228,15 +228,6 @@typedef struct net_device netdevice_t ;#endif -#ifdef WIRELESS_EXT -#if (WIRELESS_EXT <13 ) -struct iw_request_info { -__u16 cmd;/* Wireless Extension command */ -__u16 flags;/* More to come ;-) */ -}; -#endif -#endif -/* Interrupt handler backwards compatibility stuff */ #ifndef IRQ_NONE #define IRQ_NONE
Jeff Garzik
NAKQuoted 7 lines · Adrian Bunk
WIRELESS_EXT< 18 will never be true in the kernel.Signed-off-by Adrian Bunk <[email protected]>---
Quoted 10 lines
drivers/net/wireless/ipw2100.c | 434 ---------------------- drivers/net/wireless/tiacx/acx_struct.h | 5 drivers/net/wireless/tiacx/common.c | 4 drivers/net/wireless/tiacx/conv.c | 2 drivers/net/wireless/tiacx/ioctl.c | 441 ----------------------- drivers/net/wireless/tiacx/pci.c | 8 drivers/net/wireless/tiacx/usb.c | 6 drivers/net/wireless/tiacx/wlan.c | 2 drivers/net/wireless/tiacx/wlan_compat.h | 9 9 files changed, 1 insertion(+), 910 deletions(-)
NAK, patches non-existent files.
[jgarzik@pretzel linux-2.6]$ ls drivers/net/wireless/tiacx
ls: drivers/net/wireless/tiacx: No such file or directory
Quoted 19 lines · Jeff Garzik
Quoted 7 lines · Adrian Bunk
WIRELESS_EXT< 18 will never be true in the kernel.Signed-off-by Adrian Bunk <[email protected]>---
Quoted 10 lines
drivers/net/wireless/ipw2100.c | 434 ---------------------- drivers/net/wireless/tiacx/acx_struct.h | 5 drivers/net/wireless/tiacx/common.c | 4 drivers/net/wireless/tiacx/conv.c | 2 drivers/net/wireless/tiacx/ioctl.c | 441 ----------------------- drivers/net/wireless/tiacx/pci.c | 8 drivers/net/wireless/tiacx/usb.c | 6 drivers/net/wireless/tiacx/wlan.c | 2 drivers/net/wireless/tiacx/wlan_compat.h | 9 9 files changed, 1 insertion(+), 910 deletions(-)
Quoted 4 lines
NAK, patches non-existent files.
[jgarzik@pretzel linux-2.6]$ ls
drivers/net/wireless/tiacx
ls:drivers/net/wireless/tiacx: No such file or directory
As the subject says, it's against -mm.
How should I resend it?
One patch against ipw2100.c and one patch for the tiacx stuff?
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed