Skip to contentSkip to conversation

slow boot

DISCUSSION Marco Correia 2 participants 4 messages Dec 7, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

I've been experiencing very VERY slow boots after I've upgraded from kernel 2.6.10 to 2.6.14.2. The boot process is fast until the start of the init script, after this 2.6.14.2 spends 10 seconds or so for each init task.

I was searching for answers to my problem and found this thread
http://www.ussg.iu.edu/hypermail/linux/kernel/0508.3/1741.html but I really have no clue what they are talking about.

uname -a:
Linux ravel 2.6.10 #13 SMP Thu Jul 14 00:24:03 WEST 2005 i686 Intel(R) Pentium(R) 4 CPU 3.40GHz GenuineIntel GNU/Linux

Please excuse if there is a better place to ask this than here. I'm not subscribed so please answer me directly.

thanks
Marco

Signature · 1 line
Marco Correia <[email protected]>
#1 lore raw

Hi Marco,

Quoted 3 lines · Marco Correia

I've been experiencing very VERY slow boots after I've upgraded from kernel 2.6.10 to 2.6.14.2. The boot process is fast until the start of the init script, after this 2.6.14.2 spends 10 seconds or so for each init task.

It would be helpful if you could identify the exact version where this regression happened. If you're comfortable with git, please refer to
the following document on how to isolate the changeset that causes the
problem: http://www.kernel.org/pub/software/scm/git/docs/howto/isolate-bugs-with-bisect.txt

Pekka

#2 lore raw
Quoted 8 lines · Pekka Enberg

Hi Marco,

Quoted 4 lines · Marco Correia

I've been experiencing very VERY slow boots after I've upgraded from kernel 2.6.10 to 2.6.14.2. The boot process is fast until the start of the init script, after this 2.6.14.2 spends 10 seconds or so for each init task.

Quoted 8 lines

It would be helpful if you could identify the exact version where this regression happened. If you're comfortable with git, please refer to the following document on how to isolate the changeset that causes the problem:
http://www.kernel.org/pub/software/scm/git/docs/howto/isolate-bugs-with-bis
ect.txt

Pekka

Hi,

Thanks for the reply. I think my problem has something to do with this
http://bugzilla.kernel.org/show_bug.cgi?id=5165, however I just installed kernel 2.6.15_rc5 and the problem is still there, but now it seems that it slows down even before the init begins.

As soon as I have the time I'll look into git, since I never used it before.

Thanks again
Marco

Signature · 1 line
Marco Correia <[email protected]>
#3 lore raw

Hi,

Quoted 6 lines · Marco Correia

Thanks for the reply. I think my problem has something to do with this
http://bugzilla.kernel.org/show_bug.cgi?id=5165, however I just installed kernel 2.6.15_rc5 and the problem is still there, but now it seems that it slows down even before the init begins.

As soon as I have the time I'll look into git, since I never used it before.

Here's a good tutorial: http://linux.yyz.us/git-howto.html. You probably should first see if 2.6.11 and 2.6.12 have the problem. Pre-2.6.11-rc2 changesets are in old-2.6-bkcvs git tree (which used to be Bitkeeper) and rest are in linux-2.6.git as seen here:
http://www.kernel.org/git/.

Pekka