Skip to contentSkip to conversation

s390: re-activated path detection.

PATCH In review Martin Schwidefsky 1 participant 1 message Dec 9, 2005

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 2/17 s390: re-activated path detection.

From: Cornelia Huck <[email protected]>

[patch 2/17] s390: re-activated path detection.

If we receive path not operational indications (pnom in pmcw nonzero), we switch off those paths. To catch them becoming available again, we have to recalculate the lpm from the pmcw each time we start path verification.

---

 drivers/s390/cio/device_pgid.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+)
drivers/s390/cio/device_pgid.c +15 -0
diff -urpN linux-2.6/drivers/s390/cio/device_pgid.c linux-2.6-patched/drivers/s390/cio/device_pgid.c
@@ -22,6 +22,7 @@
 #include "cio_debug.h"
 #include "css.h"
 #include "device.h"
+#include "ioasm.h"
 
 /*
  * Start Sense Path Group ID helper function. Used in ccw_device_recog
@@ -364,8 +365,22 @@ ccw_device_verify_irq(struct ccw_device 
 void
 ccw_device_verify_start(struct ccw_device *cdev)
 {
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
 	cdev->private->flags.pgid_single = 0;
 	cdev->private->iretry = 5;
+	/*
+	 * Update sch->lpm with current values to catch paths becoming
+	 * available again.
+	 */
+	if (stsch(sch->irq, &sch->schib)) {
+		ccw_device_verify_done(cdev, -ENODEV);
+		return;
+	}
+	sch->lpm = sch->schib.pmcw.pim &
+		sch->schib.pmcw.pam &
+		sch->schib.pmcw.pom &
+		sch->opm;
 	__ccw_device_verify_start(cdev);
 }