EDAC: make Kconfig defaults match recommendations in help text
PATCH 1/1 EDAC: make Kconfig defaults match recommendations in help text
"config EDAC" and "config EDAC_MM_EDAC" both state clearly that if the user is unsure she should select "Y", yet the default for those options is "N".
This patch brings the default for the options into line with the recommendation stated in the help text.
Please consider for inclusion.
Signed-off-by Jesper Juhl <[email protected]>
---
drivers/edac/Kconfig | 2 ++ 1 files changed, 2 insertions(+)
drivers/edac/Kconfig +2 -0
@@ -7,14 +7,15 @@ # menu 'EDAC - error detection and reporting (RAS)' config EDAC tristate "EDAC core system error reporting" depends on X86 + default y help EDAC is designed to report errors in the core system. These are low-level errors that are reported in the CPU or supporting chipset: memory errors, cache errors, PCI errors, thermal throttling, etc.. If unsure, select 'Y'.
@@ -29,14 +30,15 @@ sub-system. You can insert module with "debug_level=x", current there're four debug levels (x=0,1,2,3 from low to high). Usually you should select 'N'. config EDAC_MM_EDAC tristate "Main Memory EDAC (Error Detection And Correction) reporting" depends on EDAC + default y help Some systems are able to detect and correct errors in main memory. EDAC can report statistics on memory error detection and correction (EDAC - or commonly referred to ECC errors). EDAC will also try to decode where these errors occurred so that a particular failing memory module can be replaced. If unsure, select 'Y'.