Book recommendations
Hello,
I am looking to get involved in kernel development, maybe start first with looking at very minor bugs effecting my local system etc.
First I would like some advice on choosing reading material, has anyone any good advice? I have previously read Unix Internals - Pate, but this is not deep enough and closer to SCO than linux.
Signature · 2 lines
Regards, Ed http://www.usenix.org.uk :%s/Open Source/Free Software/g
Hi,
Quoted 8 lines · ed
Hello,
I am looking to get involved in kernel development, maybe start first with looking at very minor bugs effecting my local system etc.
First I would like some advice on choosing reading material, has anyone any good advice? I have previously read Unix Internals - Pate, but this is not deep enough and closer to SCO than linux.
Linux Kernel Development, 2ed
http://rlove.org/kernel_book/
Linux Device Drivers 3
http://lwn.net/Kernel/LDD3/
Regards,
Michal Piotrowski
Quoted 8 lines · ed
Hello,
I am looking to get involved in kernel development, maybe start first with looking at very minor bugs effecting my local system etc.
First I would like some advice on choosing reading material, has anyone any good advice? I have previously read Unix Internals - Pate, but this is not deep enough and closer to SCO than linux.
Previously, I recommended three books:
http://www.kerneltraffic.org/kernel-traffic/kt20050605_312.html#8
and Greg KH wrote up a nice howto:
http://www.kernel.org/git/?p=linux/kernel/git/gregkh/patches.git;a=blob;f=HOWTO
-- Steve
Quoted 3 lines · Steven Rostedt
Previously, I recommended three books:
http://www.kerneltraffic.org/kernel-traffic/kt20050605_312.html#8
FWIW, I would recommend all three as well.
Pekka
Quoted 6 lines · On Sat, 24 Dec 2005 12:33:32 +0200 Pekka Enberg <[email protected]> wrote:
Quoted 3 lines · Steven Rostedt
Previously, I recommended three books:
http://www.kerneltraffic.org/kernel-traffic/kt20050605_312.html#8
FWIW, I would recommend all three as well.
Thanks for the advice people, they're on my amazon wish list, I'll see if the local library can get them in too, might save some money!
Do most people read the books before starting out? Is it something I can grasp through reading the kernel sources, I'm not shy to reading, just wondering.
Signature · 2 lines
Regards, Ed http://www.usenix.org.uk :%s/Open Source/Free Software/g
Quoted 8 lines · ed
Quoted 5 lines · On Sat, 24 Dec 2005 12:33:32 +0200 Pekka Enberg <[email protected]> wrote:
Quoted 3 lines · Steven Rostedt
Previously, I recommended three books:
http://www.kerneltraffic.org/kernel-traffic/kt20050605_312.html#8
Quoted 8 lines
Quoted 1 line
FWIW, I would recommend all three as well.
Thanks for the advice people, they're on my amazon wish list, I'll see if the local library can get them in too, might save some money!
Do most people read the books before starting out? Is it something I can grasp through reading the kernel sources, I'm not shy to reading, just wondering.
The best way is to have the books as you walk through the code. The books themselves are not very useful if you are not looking at the code while you read them. Let me rephrase that, the books are much more helpful when the code is in front of you, and you can experiment with modules and such, and do the examples in the books.
Warning, the books are much more static than the kernel. So some of the examples in the books will not work with the latest kernels, but if you find one, it's OK to pop a quick question here, and you might get an answer for a current example. But check out the websites listed in the book first, I believe they have updates.
-- Steve