Skip to contentSkip to conversation

i2c: scx200_acb - documentation update

PATCH New Ben Gardner 2 participants 4 messages Dec 19, 2005 – Dec 28, 2005

Subsystems (2)
I2C subsystem host drivers I2C
lore
Share & tools
lore

Ben Gardner

author
#0 lore raw

PATCH 7/7 i2c: scx200_acb - documentation update

Added mention of the CS5535 and CS5536 and noted that the 'base' module parameter is only used for the scx200 and sc1100.

Signed-off-by: Ben Gardner <bgardner at wabtec.com> -------------- next part --------------

 Documentation/i2c/busses/scx200_acb |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
Documentation/i2c/busses/scx200_acb +3 -2
@@ -6,9 +6,10 @@ Module Parameters
 -----------------
 
 * base: int
-  Base addresses for the ACCESS.bus controllers
+  Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
 
 Description
 -----------
 
-Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+Enable the use of the ACCESS.bus controllers of SCx200, SC1100, CS5535, and
+CS5536 Geode CPU companion devices.
author
#1 lore raw

PATCH 7/7 i2c: scx200_acb - documentation update

scx200_acb: Minimal documentation update

Signed-off-by Ben Gardner <bgardner at wabtec.com>

---
This is the second version of the series.
-------------- next part --------------

 Documentation/i2c/busses/scx200_acb |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)
Documentation/i2c/busses/scx200_acb +3 -2
@@ -6,9 +6,10 @@ Module Parameters
 -----------------
 
 * base: int
-  Base addresses for the ACCESS.bus controllers
+  Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
 
 Description
 -----------
 
-Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+Enable the use of the ACCESS.bus controllers of SCx200, SC1100, CS5535, and
+CS5536 Geode CPU companion devices.
author
#2 lore raw

PATCH 7/7 i2c: scx200_acb - documentation update

In reply to Ben Gardner

scx200_acb: Minimal documentation update

Signed-off-by Ben Gardner <bgardner at wabtec.com>

---
New and improved - now includes Kconfig updates!
-------------- next part --------------

 Documentation/i2c/busses/scx200_acb |    5 +++--
 drivers/i2c/busses/Kconfig          |    5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/i2c/busses/scx200_acb +3 -2
@@ -6,9 +6,10 @@ Module Parameters
 -----------------
 
 * base: int
-  Base addresses for the ACCESS.bus controllers
+  Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
 
 Description
 -----------
 
-Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+Enable the use of the ACCESS.bus controller on the Geode SCx200 and
+SC1100 processors and the CS5535 and CS5536 Geode companion devices.
drivers/i2c/busses/Kconfig +3 -2
@@ -398,10 +398,11 @@ config SCx200_I2C_SDA
 	  also be specified with a module parameter.
 
 config SCx200_ACB
-	tristate "NatSemi SCx200 ACCESS.bus"
+	tristate "Geode ACCESS.bus support"
 	depends on I2C && PCI
 	help
-	  Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.
 
 	  If you don't know what to do here, say N.
#3 lore raw

PATCH 7/7 i2c: scx200_acb - documentation update

In reply to Ben Gardner

Hi Ben,

Quoted 5 lines

scx200_acb: Minimal documentation update

Signed-off-by Ben Gardner <bgardner at wabtec.com>

---
New and improved - now includes Kconfig updates!

Great, applied, thanks.

Signature · 1 line
Jean Delvare