usb/input: Add missing keys to hid-debug.h
PATCH 1/1 usb/input: Add missing keys to hid-debug.h
This patch adds the missing keys from input.h to hid-debug.h.
---
Dmitry: This patch replaces the one I submitted on December 11, 2005. The old one had only KEY_FN while this one has all keys. If wanted, I can submit a patch that applies over the old patch.
drivers/usb/input/hid-debug.h +15 -0
@@ -681,6 +681,21 @@ static char *keys[KEY_MAX + 1] = { [KEY_SEND] = "Send", [KEY_REPLY] = "Reply", [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save", [KEY_DOCUMENTS] = "Documents", + [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC", + [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2", + [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D", + [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F", + [KEY_FN_S] = "Fn+S", + [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2", + [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4", + [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6", + [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8", + [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10", + [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12", + [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle", + [KEY_KBDILLUMDOWN] = "KbdIlluminationDown", + [KEY_KBDILLUMUP] = "KbdIlluminationUp", + [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode", };static char *relatives[REL_MAX +1 ] = {
Quoted 3 lines · Michael Hanselmann
This patch adds the missing keys from
input.htohid-debug.h.Signed-off-by Michael Hanselmann <[email protected]>
Thank you Michael, I will add it to my tree. I still ponder your other patch and whether we should employ something like hooks for HID.
Signature · 1 line
Dmitry
Quoted 7 lines · Dmitry Torokhov
Quoted 3 lines · Michael Hanselmann
This patch adds the missing keys from
input.htohid-debug.h.Signed-off-by Michael Hanselmann <[email protected]>Thank you Michael, I will add it to my tree. I still ponder your other patch and whether we should employ something like hooks for HID.
We should split HID in two parts - transport and decoding. This would help in many places:
Bluetooth would be happy, because it uses the same HID protocol on top of a different transport layer (completely non-USB).
Wacom and many other blacklisted devices would be happy, because they could use the USB HID transport - no blacklist would be needed.
Would allow for /dev/usb/rawhid0 style devices, which would give access to raw HID reports without any parsing done.
Would allow userspace drivers for broken UPS devices (like APC) without the need for special handling of their bugs in the kernel.
It seems to me it could be almost its own layer, like serio or gameport. Windows has an API like that.
I don't have the time to do the split myself, but it shouldn't be too hard.
It would not be the perfect solution for Apple keyboards, because the patch is simplifies by doing the processing after parsing the reports, but still, since it would allow for device-specific parsers, it'd be a reasonable solution for devices that need more special handling than just a simple quirk.
Signature · 2 lines
Vojtech Pavlik SuSE Labs, SuSE CR
usb/input: Split into separate layers (was: Re: [PATCH 1/1] usb/input: Add missing keys to hid-debug.h)
Hello Vojtech
Quoted 6 lines · Vojtech Pavlik
We should split HID in two parts - transport and decoding. This would help in many places:
[...]I don't have the time to do the split myself, but it shouldn't be too hard.
And for myself, I think I'm not enough into kernel development already. Beside of that, USB isn't my very interest but those patches had to be done to get the new PowerBook models running smooth. Hopefully there's someone else interested in doing the split because it would be a good thing.
Quoted 1 line
It would not be the perfect solution for Apple keyboards, [...]
Does that mean the patch doesn't get into the kernel until the split happened?
Thanks,
Michael
Re: usb/input: Split into separate layers (was: Re: [PATCH 1/1] usb/input: Add missing keys to hid-debug.h)
Quoted 16 lines · Michael Hanselmann
Hello Vojtech
Quoted 6 lines · Vojtech Pavlik
We should split HID in two parts - transport and decoding. This would help in many places:
[...]I don't have the time to do the split myself, but it shouldn't be too hard.
And for myself, I think I'm not enough into kernel development already. Beside of that, USB isn't my very interest but those patches had to be done to get the new PowerBook models running smooth. Hopefully there's someone else interested in doing the split because it would be a good thing.
Quoted 5 lines
Quoted 1 line
It would not be the perfect solution for Apple keyboards, [...]
Does that mean the patch doesn't get into the kernel until the split happened?
No, it does not mean that.
Signature · 1 line
Dmitry
Re: usb/input: Split into separate layers (was: Re: [PATCH 1/1] usb/input: Add missing keys to hid-debug.h)
In reply to Michael HanselmannQuoted 16 lines · Michael Hanselmann
Hello Vojtech
Quoted 6 lines · Vojtech Pavlik
We should split HID in two parts - transport and decoding. This would help in many places:
[...]I don't have the time to do the split myself, but it shouldn't be too hard.
And for myself, I think I'm not enough into kernel development already. Beside of that, USB isn't my very interest but those patches had to be done to get the new PowerBook models running smooth. Hopefully there's someone else interested in doing the split because it would be a good thing.
Quoted 4 lines
Quoted 1 line
It would not be the perfect solution for Apple keyboards, [...]
Does that mean the patch doesn't get into the kernel until the split happened?
No, I'm fine with the patch going in, but it can be removed and redone as a separate HID parser if the split happens.
Signature · 2 lines
Vojtech Pavlik SuSE Labs, SuSE CR
Hi guys,
Quoted 13 lines
We should split HID in two parts - transport and decoding. This would help in many places:
Bluetooth would be happy, because it uses the same HID protocol on top of a different transport layer (completely non-USB).
Wacom and many other blacklisted devices would be happy, because they could use the USB HID transport - no blacklist would be needed.
Would allow for
/dev/usb/rawhid0style devices, which would give access to raw HID reports without any parsing done.
Quoted 8 lines
Would allow userspace drivers for broken UPS devices (like APC) without the need for special handling of their bugs in the kernel.
It seems to me it could be almost its own layer, like serio or gameport. Windows has an API like that.
I don't have the time to do the split myself, but it shouldn't be too hard.
I actually started this work when I presented the Bluetooth HID at the Linux-Kongress 2004. However getting this fully done is not as easy as it sounds. There are still parts inside the HID driver that I still have no clue why they exists and what they actually do. A good revision history inside the SCM seems really important for this driver.
The biggest problem that I see is that we can't break the current USB HID driver, because this will render a lot of desktop system totally useless and one 2.6 release is not enough to sort the problems out. Even breaking the -mm kernel doesn't sound very helpful.
My idea actually was to create a HID subsystem under drivers/hid/ which will be a fully copy of the current usbhid.ko driver, but without any USB related code. This means that hiddev needs its own major number. After that I am happy to offer the Bluetooth subsystem as testing base for the new HID subsystem. The number of devices are still limited, but it should be enough to sort out the basic problems.
The rawhidX devices should not be USB specific, because we might even need them with Bluetooth as transport. There exists a Wacom tablet that might make use of it.
I also need raw access to the reports (sending and receiving) for some special features. The LCD displays of some Logitech keyboards are using two report IDs for this job. It would be great to handle them via a special rawhidX (with a ID filter) or via an extra driver while the basic input processing is still done by the HID driver.
Regards
Marcel