Skip to contentSkip to conversation

UML - Simplify console opening/closing and irq registration

PATCH New Jeff Dike 1 participant 1 message Jan 3, 2006 User-mode Linux (UML)

lore
Share & tools
lore

Jeff Dike

author
#0 lore raw

PATCH 10/12 UML - Simplify console opening/closing and irq registration

This patch simplifies the opening and closing of host console devices and the registration and deregistration of IRQs. The intent is to make it obvious that an IRQ can't exist without an open file descriptor.
chan_enable will now open the channel, and when both opening and IRQ registration are desired, this should be used. Opening only is done for the initial console, so that interface still needs to exist. The free_irqs_later interface is now gone. It was intended to avoid freeing an IRQ while it was being processed. It did this, but it didn't eliminate the possiblity of free_irq being called from an interrupt, which is bad. In its place is a list of irqs to be freed, which is processed by the signal handler just before exiting. close_one_chan now disables irqs.
When a host device disappears, it is just closed, and that disables IRQs.
The device id registered with the IRQ is now the chan structure, not the tty. This is because the interrupt arrives on a descriptor associated with the channel. This caused equivalent changes in the arguments to line_timer_cb.
line_disable is gone since it is not used any more.
The count field in the line structure is gone. tty->count is used instead.
The complicated logic in sigio_handler with freeing IRQs when necessary and making sure its idea of the next irq is correct is now much simpler. The irq list can't be rearranged underneath it, so it is now a simple list walk.

arch/um/drivers/chan_kern.c +73 -38
Index: linux-2.6.15/arch/um/drivers/chan_kern.c
===================================================================
@@ -1,4 +1,4 @@
-/* 
+/*
  * Copyright (C) 2000, 2001, 2002 Jeff Dike ([email protected])
  * Licensed under the GPL
  */
@@ -240,20 +240,65 @@ void chan_enable_winch(struct list_head 
 	}
 }
 
-void enable_chan(struct list_head *chans, struct tty_struct *tty)
+void enable_chan(struct line *line)
 {
 	struct list_head *ele;
 	struct chan *chan;
 
-	list_for_each(ele, chans){
+	list_for_each(ele, &line->chan_list){
 		chan = list_entry(ele, struct chan, list);
-		if(!chan->opened) continue;
+		if(open_one_chan(chan))
+			continue;
+
+		if(chan->enabled)
+			continue;
+		line_setup_irq(chan->fd, chan->input, chan->output, line,
+			       chan);
+		chan->enabled = 1;
+	}
+}
+
+static LIST_HEAD(irqs_to_free);
+
+void free_irqs(void)
+{
+	struct chan *chan;
+
+	while(!list_empty(&irqs_to_free)){
+		chan = list_entry(irqs_to_free.next, struct chan, free_list);
+		list_del(&chan->free_list);
+
+		if(chan->input)
+			free_irq(chan->line->driver->read_irq, chan);
+		if(chan->output)
+			free_irq(chan->line->driver->write_irq, chan);
+		chan->enabled = 0;
+	}
+}
+
+static void close_one_chan(struct chan *chan, int delay_free_irq)
+{
+	if(!chan->opened)
+		return;
 
-		line_setup_irq(chan->fd, chan->input, chan->output, tty);
+	if(delay_free_irq){
+		list_add(&chan->free_list, &irqs_to_free);
+	}
+	else {
+		if(chan->input)
+			free_irq(chan->line->driver->read_irq, chan);
+		if(chan->output)
+			free_irq(chan->line->driver->write_irq, chan);
+		chan->enabled = 0;
 	}
+	if(chan->ops->close != NULL)
+		(*chan->ops->close)(chan->fd, chan->data);
+
+	chan->opened = 0;
+	chan->fd = -1;
 }
 
-void close_chan(struct list_head *chans)
+void close_chan(struct list_head *chans, int delay_free_irq)
 {
 	struct chan *chan;
 
@@ -263,11 +308,7 @@ void close_chan(struct list_head *chans)
 	 * so it must be the last closed.
 	 */
 	list_for_each_entry_reverse(chan, chans, list) {
-		if(!chan->opened) continue;
-		if(chan->ops->close != NULL)
-			(*chan->ops->close)(chan->fd, chan->data);
-		chan->opened = 0;
-		chan->fd = -1;
+		close_one_chan(chan, delay_free_irq);
 	}
 }
 
@@ -339,24 +380,27 @@ int chan_window_size(struct list_head *c
 	return 0;
 }
 
-void free_one_chan(struct chan *chan)
+void free_one_chan(struct chan *chan, int delay_free_irq)
 {
 	list_del(&chan->list);
+
+	close_one_chan(chan, delay_free_irq);
+
 	if(chan->ops->free != NULL)
 		(*chan->ops->free)(chan->data);
-	free_irq_by_fd(chan->fd);
+
 	if(chan->primary && chan->output) ignore_sigio_fd(chan->fd);
 	kfree(chan);
 }
 
-void free_chan(struct list_head *chans)
+void free_chan(struct list_head *chans, int delay_free_irq)
 {
 	struct list_head *ele, *next;
 	struct chan *chan;
 
 	list_for_each_safe(ele, next, chans){
 		chan = list_entry(ele, struct chan, list);
-		free_one_chan(chan);
+		free_one_chan(chan, delay_free_irq);
 	}
 }
 
@@ -466,7 +510,8 @@ struct chan_type chan_table[] = {
 #endif
 };
 
-static struct chan *parse_chan(char *str, int device, struct chan_opts *opts)
+static struct chan *parse_chan(struct line *line, char *str, int device,
+			       struct chan_opts *opts)
 {
 	struct chan_type *entry;
 	struct chan_ops *ops;
@@ -499,25 +544,30 @@ static struct chan *parse_chan(char *str
 	if(chan == NULL)
 		return NULL;
 	*chan = ((struct chan) { .list	 	= LIST_HEAD_INIT(chan->list),
+				 .free_list 	=
+				 	LIST_HEAD_INIT(chan->free_list),
+				 .line		= line,
 				 .primary	= 1,
 				 .input		= 0,
 				 .output 	= 0,
 				 .opened  	= 0,
+				 .enabled  	= 0,
 				 .fd 		= -1,
 				 .ops 		= ops,
 				 .data 		= data });
 	return chan;
 }
 
-int parse_chan_pair(char *str, struct list_head *chans, int device,
+int parse_chan_pair(char *str, struct line *line, int device,
 		    struct chan_opts *opts)
 {
+	struct list_head *chans = &line->chan_list;
 	struct chan *new, *chan;
 	char *in, *out;
 
 	if(!list_empty(chans)){
 		chan = list_entry(chans->next, struct chan, list);
-		free_chan(chans);
+		free_chan(chans, 0);
 		INIT_LIST_HEAD(chans);
 	}
 
@@ -526,14 +576,14 @@ int parse_chan_pair(char *str, struct li
 		in = str;
 		*out = '\0';
 		out++;
-		new = parse_chan(in, device, opts);
+		new = parse_chan(line, in, device, opts);
 		if(new == NULL)
 			return -1;
 
 		new->input = 1;
 		list_add(&new->list, chans);
 
-		new = parse_chan(out, device, opts);
+		new = parse_chan(line, out, device, opts);
 		if(new == NULL)
 			return -1;
 
@@ -541,7 +591,7 @@ int parse_chan_pair(char *str, struct li
 		new->output = 1;
 	}
 	else {
-		new = parse_chan(str, device, opts);
+		new = parse_chan(line, str, device, opts);
 		if(new == NULL)
 			return -1;
 
@@ -592,27 +642,12 @@ void chan_interrupt(struct list_head *ch
 			if(chan->primary){
 				if(tty != NULL)
 					tty_hangup(tty);
-				line_disable(tty, irq);
-				close_chan(chans);
+				close_chan(chans, 1);
 				return;
 			}
-			else {
-				if(chan->ops->close != NULL)
-					chan->ops->close(chan->fd, chan->data);
-			}
+			else close_one_chan(chan, 1);
 		}
 	}
  out:
 	if(tty) tty_flip_buffer_push(tty);
 }
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
arch/um/drivers/line.c +47 -69

229 lines not on this page · raw message

arch/um/include/irq_user.h +1 -12
Index: linux-2.6.15/arch/um/include/irq_user.h
===================================================================
@@ -18,19 +18,8 @@ extern int deactivate_all_fds(void);
 extern void forward_interrupts(int pid);
 extern void init_irq_signals(int on_sigstack);
 extern void forward_ipi(int fd, int pid);
-extern void free_irq_later(int irq, void *dev_id);
 extern int activate_ipi(int fd, int pid);
 extern unsigned long irq_lock(void);
 extern void irq_unlock(unsigned long flags);
-#endif
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
arch/um/include/line.h +3 -3
Index: linux-2.6.15/arch/um/include/line.h
===================================================================
@@ -32,6 +32,7 @@ struct line_driver {
 };
 
 struct line {
+	struct tty_struct *tty;
 	char *init_str;
 	int init_pri;
 	struct list_head chan_list;
@@ -89,10 +90,9 @@ extern int line_ioctl(struct tty_struct 
 		      unsigned int cmd, unsigned long arg);
 
 extern char *add_xterm_umid(char *base);
-extern int line_setup_irq(int fd, int input, int output,
-			  struct tty_struct *tty);
+extern int line_setup_irq(int fd, int input, int output, struct line *line,
+			  void *data);
 extern void line_close_chan(struct line *line);
-extern void line_disable(struct tty_struct *tty, int current_irq);
 extern struct tty_driver * line_register_devfs(struct lines *set,
 				struct line_driver *line_driver,
 				struct tty_operations *driver,
arch/um/kernel/irq_user.c +7 -41

86 lines not on this page · raw message

arch/um/include/chan_kern.h +6 -3
Index: linux-2.6.15/arch/um/include/chan_kern.h
===================================================================
@@ -14,11 +14,14 @@
 
 struct chan {
 	struct list_head list;
+	struct list_head free_list;
+	struct line *line;
 	char *dev;
 	unsigned int primary:1;
 	unsigned int input:1;
 	unsigned int output:1;
 	unsigned int opened:1;
+	unsigned int enabled:1;
 	int fd;
 	struct chan_ops *ops;
 	void *data;
@@ -26,7 +29,7 @@ struct chan {
 
 extern void chan_interrupt(struct list_head *chans, struct work_struct *task,
 			   struct tty_struct *tty, int irq);
-extern int parse_chan_pair(char *str, struct list_head *chans, int device,
+extern int parse_chan_pair(char *str, struct line *line, int device,
 			   struct chan_opts *opts);
 extern int open_chan(struct list_head *chans);
 extern int write_chan(struct list_head *chans, const char *buf, int len,
@@ -35,9 +38,9 @@ extern int console_write_chan(struct lis
 			      int len);
 extern int console_open_chan(struct line *line, struct console *co,
 			     struct chan_opts *opts);
-extern void close_chan(struct list_head *chans);
 extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty);
-extern void enable_chan(struct list_head *chans, struct tty_struct *tty);
+extern void enable_chan(struct line *line);
+extern void close_chan(struct list_head *chans, int delay_free_irq);
 extern int chan_window_size(struct list_head *chans, 
 			     unsigned short *rows_out, 
 			     unsigned short *cols_out);

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
User-mode-linux-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel