Skip to contentSkip to conversation

Problems with 2.6.15-mm1 and mm2.

DISCUSSION Martin Bligh 3 participants 6 messages Jan 9, 2006 – Jan 10, 2006

lore
Share & tools
lore
#0 lore raw

OK, so on -mm1 we get:

Unable to handle kernel NULL pointer dereference at virtual address 00000004
 printing eip:
c01fccd2
*pde = 0042d001
*pte = 00000000
Oops: 0000 [#1]
SMP
last sysfs file:
Modules linked in:
CPU:    0
EIP:    0060:[<c01fccd2>]    Not tainted VLI
EFLAGS: 00010286   (2.6.15-mm1-autokern1)

EIP is at pci_call_probe+0x1a/0xa1
eax: 00000000 ebx: ffffffed ecx: e748a030 edx: c03a4680
esi: e7767800 edi: c03a4680 ebp: ffffffff esp: e749fef0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=e749e000 task=e748a030)

Stack: <0>ffffffed e7767800 c03a4680 c03a46ac c01fcd8c c03a4680 e7767800 c03a441c
       <0>c03a4680 e7767800 c03a46ac c01fcdbf c03a4680 e7767800 
e7767800 00000000
       <0>e7767848 c021c265 e7767848 e7767848 00000000 c021c311 
c021c34a c03a46ac
Call Trace:
 [<c01fcd8c>] __pci_device_probe+0x33/0x47
 [<c01fcdbf>] pci_device_probe+0x1f/0x34
 [<c021c265>] driver_probe_device+0x3a/0x84
 [<c021c311>] __driver_attach+0x0/0x60
 [<c021c34a>] __driver_attach+0x39/0x60
 [<c021ba18>] bus_for_each_dev+0x47/0x6d
 [<c01f4d5a>] kobject_add+0x76/0x95
 [<c021c385>] driver_attach+0x14/0x18
 [<c021c311>] __driver_attach+0x0/0x60
 [<c021be30>] bus_add_driver+0x54/0x87
 [<c021c72c>] driver_register+0x3b/0x3e
 [<c01fcfa6>] __pci_register_driver+0x7e/0x8c
 [<c03f646d>] qla1280_init+0xc/0xf
 [<c03e4789>] do_initcalls+0x4b/0x99
 [<c0100393>] init+0x98/0x195
 [<c01002fb>] init+0x0/0x195
 [<c0100ea9>] kernel_thread_helper+0x5/0xb

from the NUMA-Q. http://test.kernel.org/19793/debug/console.log

------------------------------------------------------------------

on -mm2 I get the x86_64 seems to lock up (NFI why ... looking at it), the NUMA-Q and x440 panic (very similar to the above).

I think Andy figured out what was causing those panics. Can we drop those patches until they're fixed?

Thanks,

M.

#1 lore raw
Quoted 45 lines · Martin Bligh

OK, so on -mm1 we get:

Unable to handle kernel NULL pointer dereference at virtual address 00000004
  printing eip:
c01fccd2
*pde = 0042d001
*pte = 00000000
Oops: 0000 [#1]
SMP
last sysfs file:
Modules linked in:
CPU:    0
EIP:    0060:[<c01fccd2>]    Not tainted VLI
EFLAGS: 00010286   (2.6.15-mm1-autokern1)

EIP is at pci_call_probe+0x1a/0xa1
eax: 00000000 ebx: ffffffed ecx: e748a030 edx: c03a4680
esi: e7767800 edi: c03a4680 ebp: ffffffff esp: e749fef0
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=e749e000 task=e748a030)

Stack: <0>ffffffed e7767800 c03a4680 c03a46ac c01fcd8c c03a4680 e7767800 
c03a441c
        <0>c03a4680 e7767800 c03a46ac c01fcdbf c03a4680 e7767800 
e7767800 00000000
        <0>e7767848 c021c265 e7767848 e7767848 00000000 c021c311 
c021c34a c03a46ac
Call Trace:
  [<c01fcd8c>] __pci_device_probe+0x33/0x47
  [<c01fcdbf>] pci_device_probe+0x1f/0x34
  [<c021c265>] driver_probe_device+0x3a/0x84
  [<c021c311>] __driver_attach+0x0/0x60
  [<c021c34a>] __driver_attach+0x39/0x60
  [<c021ba18>] bus_for_each_dev+0x47/0x6d
  [<c01f4d5a>] kobject_add+0x76/0x95
  [<c021c385>] driver_attach+0x14/0x18
  [<c021c311>] __driver_attach+0x0/0x60
  [<c021be30>] bus_add_driver+0x54/0x87
  [<c021c72c>] driver_register+0x3b/0x3e
  [<c01fcfa6>] __pci_register_driver+0x7e/0x8c
  [<c03f646d>] qla1280_init+0xc/0xf
  [<c03e4789>] do_initcalls+0x4b/0x99
  [<c0100393>] init+0x98/0x195
  [<c01002fb>] init+0x0/0x195
  [<c0100ea9>] kernel_thread_helper+0x5/0xb
Quoted 2 lines

from the NUMA-Q. http://test.kernel.org/19793/debug/console.log

Yes, I asked Greg about that - we don't know what's causing it yet. I have a bad feeling that this bug will go into Linus's tree if we don't fix it quick.

I had problems with gregkh-pci-x86-pci-domain-support-the-meat.patch. It might be worth reverting that.

Quoted 7 lines

on -mm2 I get the x86_64 seems to lock up (NFI why ... looking at it), the NUMA-Q and x440 panic (very similar to the above).

I think Andy figured out what was causing those panics. Can we drop those patches until they're fixed?

I'm not aware of any buggy x86_64 patches in -mm2 :(

I guess you don't have the time to sit down and do a bisection search. It'd take a solid few hours...

#2 lore raw
Quoted 11 lines
Quoted 3 lines

from the NUMA-Q. http://test.kernel.org/19793/debug/console.log

Yes, I asked Greg about that - we don't know what's causing it yet. I have a bad feeling that this bug will go into Linus's tree if we don't fix it quick.

I had problems with gregkh-pci-x86-pci-domain-support-the-meat.patch. It might be worth reverting that.

Andy figured out what caused it.

Quoted 9 lines
Quoted 4 lines

on -mm2 I get the x86_64 seems to lock up (NFI why ... looking at it), the NUMA-Q and x440 panic (very similar to the above).

I think Andy figured out what was causing those panics. Can we drop those patches until they're fixed?

I'm not aware of any buggy x86_64 patches in -mm2 :(

I guess you don't have the time to sit down and do a bisection search. It'd take a solid few hours...

It's more that I don't have direct access to the machines in question
any more. The x86_64 one might just be a machine issue ... trying to confirm that still ... but the PCI one was real.

M.

Below is cut & pasted, so not applyable, and maybe it shouldn't be applied. But ... it worked before whatever is in -mm ... so my personal feeling is that if we don't have a fix for whatever is currently in -mm, it should get dropped until we do ? Going backwards = bad.

Perhaps I'm in a time loop, and just confused. but I don't think so ?

----------------------------------------------

From apw:

pci device ensure sysdata initialised

[Ok, here is a patch to ensure sysdata is valid for all busses.]

We have been seeing panic's on NUMA systems in pci_call_probe() in 2.6.15-rc5-mm2 and -mm3. It seems that some changes have occured to the meaning of the 'sysdata' for a device such that it is no longer just an integer containing the node, it is now a structure containing the node and other data. However, it seems that we do not always initialise this sysdata before we probe the device.

Below are three examples from a boot with this checked for. The attached patch ensures that we supply a valid sysdata for system busses. Currently we take no account of the node for this bus for no ACPI configured systems. This is unchanged from the -mm1 code.

	Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
	Copyright (c) 1999-2005 Intel Corporation.
	pci_call_probe: starting drv<c03d4be0> dev<dfd16800> id<c03d4734>
	pci_call_probe: dev->bus<dfce6800>
	pci_call_probe: dev->bus->sysdata<00000000>
	pci_call_probe: node<-1>
	e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection

	pci_call_probe: starting drv<c03ef220> dev<dfd17400> id<c03eed00>
	pci_call_probe: dev->bus<dfce6800>
	pci_call_probe: dev->bus->sysdata<00000000>
	pci_call_probe: node<-1>
	Linux Tulip driver version 1.1.13 (December 15, 2004)
	input: AT Translated Set 2 keyboard as /class/input/input0
	tulip0:  EEPROM default media type Autosense.
	tulip0:  Index #0 - Media 10baseT (#0) described by a
		21140 non-MII (0) block.
	tulip0:  Index #1 - Media 100baseTx (#3) described by a
		21140 non-MII (0) block.
	tulip0:  Index #2 - Media 10baseT-FDX (#4) described by a
		21140 non-MII (0) block.
	tulip0:  Index #3 - Media 100baseTx-FDX (#5) described by a
		21140 non-MII (0) block.
	eth1: Digital DS21140 Tulip rev 33 at 0001fc00,
		00:00:BC:0F:08:96, IRQ 28.

	pci_call_probe: starting drv<c040a360> dev<dfd14400> id<c040a0fc>
	pci_call_probe: dev->bus<dfce6600>
	pci_call_probe: dev->bus->sysdata<dfffafa0>
	pci_call_probe: node<0>
	qla1280: QLA1040 found on PCI bus 0, dev 11
---
 arch/i386/pci/common.c |    2 ++
 arch/i386/pci/fixup.c  |    8 +++++---
 arch/i386/pci/legacy.c |    3 ++-
 arch/i386/pci/numa.c   |    8 +++++---
 arch/i386/pci/visws.c  |    4 ++--
 include/asm-i386/pci.h |    1 +
 6 files changed, 17 insertions(+), 9 deletions(-)
arch/i386/pci/common.c +2 -0
diff -upN reference/arch/i386/pci/common.c current/arch/i386/pci/common.c
@@ -29,6 +29,8 @@ unsigned long pirq_table_addr;
 struct pci_bus *pci_root_bus;
 struct pci_raw_ops *raw_pci_ops;
 
+struct pci_sysdata pci_default_sysdata = { .node = -1 };
+
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int 

where, int size, u32 *value)
{
return raw_pci_ops->read(pci_domain_nr(bus), bus->number,

arch/i386/pci/fixup.c +4 -2
diff -upN reference/arch/i386/pci/fixup.c current/arch/i386/pci/fixup.c
@@ -25,9 +25,11 @@ static void __devinit pci_fixup_i450nx(s
 		pci_read_config_byte(d, reg++, &subb);
 		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
 		if (busno)
-			pci_scan_bus(busno, &pci_root_ops, NULL);	/* Bus A */
+			pci_scan_bus(busno, &pci_root_ops,
+					&pci_default_sysdata);	/* Bus A */
 		if (suba < subb)
-			pci_scan_bus(suba+1, &pci_root_ops, NULL);	/* Bus B */
+			pci_scan_bus(suba+1, &pci_root_ops,
+					&pci_default_sysdata);	/* Bus B */
 	}
 	pcibios_last_bus = -1;
 }
@@ -42,7 +44,7 @@ static void __devinit pci_fixup_i450gx(s
 	u8 busno;
 	pci_read_config_byte(d, 0x4a, &busno);
 	printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus 

%02x\n", pci_name(d), busno);
- pci_scan_bus(busno, &pci_root_ops, NULL);
+ pci_scan_bus(busno, &pci_root_ops, &pci_default_sysdata);
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);

arch/i386/pci/legacy.c +2 -1
diff -upN reference/arch/i386/pci/legacy.c current/arch/i386/pci/legacy.c
@@ -26,7 +26,8 @@ static void __devinit pcibios_fixup_peer
 			    l != 0x0000 && l != 0xffff) {
 				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
 				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus(n, &pci_root_ops, NULL);
+				pci_scan_bus(n, &pci_root_ops,
+						&pci_default_sysdata);
 				break;
 			}
 		}
arch/i386/pci/numa.c +5 -3
diff -upN reference/arch/i386/pci/numa.c current/arch/i386/pci/numa.c
@@ -97,9 +97,11 @@ static void __devinit pci_fixup_i450nx(s
 		pci_read_config_byte(d, reg++, &subb);
 		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
 		if (busno)
-			pci_scan_bus(QUADLOCAL2BUS(quad,busno), &pci_root_ops, NULL);	/* Bus A */
+			pci_scan_bus(QUADLOCAL2BUS(quad,busno), &pci_root_ops,
+					&pci_default_sysdata);	/* Bus A */
 		if (suba < subb)
-			pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), &pci_root_ops, NULL);	/* Bus B */
+			pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), &pci_root_ops,
+					&pci_default_sysdata);	/* Bus B */
 	}
 	pcibios_last_bus = -1;
 }
@@ -124,7 +126,7 @@ static int __init pci_numa_init(void)
 			printk("Scanning PCI bus %d for quad %d\n",
 				QUADLOCAL2BUS(quad,0), quad);
 			pci_scan_bus(QUADLOCAL2BUS(quad,0),
-				&pci_root_ops, NULL);
+				&pci_root_ops, &pci_default_sysdata);
 		}
 	return 0;
 }
arch/i386/pci/visws.c +2 -2
diff -upN reference/arch/i386/pci/visws.c current/arch/i386/pci/visws.c
@@ -102,8 +102,8 @@ static int __init pcibios_init(void)
 		"bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
 
 	raw_pci_ops = &pci_direct_conf1;
-	pci_scan_bus(pci_bus0, &pci_root_ops, NULL);
-	pci_scan_bus(pci_bus1, &pci_root_ops, NULL);
+	pci_scan_bus(pci_bus0, &pci_root_ops, &pci_default_sysdata);
+	pci_scan_bus(pci_bus1, &pci_root_ops, &pci_default_sysdata);
 	pci_fixup_irqs(visws_swizzle, visws_map_irq);
 	pcibios_resource_survey();
 	return 0;
include/asm-i386/pci.h +1 -0
diff -upN reference/include/asm-i386/pci.h current/include/asm-i386/pci.h
@@ -9,6 +9,7 @@ struct pci_sysdata {
 	int		domain;		/* PCI domain */
 	int		node;		/* NUMA node */
 };
+extern struct pci_sysdata pci_default_sysdata;
 
 #ifdef CONFIG_PCI_DOMAINS
 static inline int pci_domain_nr(struct pci_bus *bus)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
Quoted 31 lines · Martin Bligh
Quoted 11 lines
Quoted 3 lines

from the NUMA-Q. http://test.kernel.org/19793/debug/console.log

Yes, I asked Greg about that - we don't know what's causing it yet. I have a bad feeling that this bug will go into Linus's tree if we don't fix it quick.

I had problems with gregkh-pci-x86-pci-domain-support-the-meat.patch. It might be worth reverting that.

Andy figured out what caused it.

Quoted 8 lines
Quoted 6 lines

on -mm2 I get the x86_64 seems to lock up (NFI why ... looking at it), the NUMA-Q and x440 panic (very similar to the above).

I think Andy figured out what was causing those panics. Can we drop those patches until they're fixed?

Quoted 4 lines

I'm not aware of any buggy x86_64 patches in -mm2 :(

I guess you don't have the time to sit down and do a bisection search. It'd take a solid few hours...

It's more that I don't have direct access to the machines in question any more. The x86_64 one might just be a machine issue ... trying to confirm that still ... but the PCI one was real.

Quoted 8 lines

M.

Below is cut & pasted, so not applyable, and maybe it shouldn't be applied. But ... it worked before whatever is in -mm ... so my personal feeling is that if we don't have a fix for whatever is currently in -mm, it should get dropped until we do ? Going backwards = bad.

Perhaps I'm in a time loop, and just confused. but I don't think so ?

This isn't at all clear, sorry.

Does the patch you sent fix things in 2.6.15-mm2? On NUMAQ and on x86_64? Does it fix a bug which was introduced in a patch which in in 2.6.15-mm2? If so, which one?

etc ;)

#4 lore raw
Quoted 8 lines
Quoted 3 lines

Below is cut & pasted, so not applyable, and maybe it shouldn't be applied. But ... it worked before whatever is in -mm ... so my personal feeling is that if we don't have a fix for whatever is currently in -mm, it should get dropped until we do ? Going backwards = bad.

Perhaps I'm in a time loop, and just confused. but I don't think so ?

This isn't at all clear, sorry.

Does the patch you sent fix things in 2.6.15-mm2? On NUMAQ and on x86_64? Does it fix a bug which was introduced in a patch which in in 2.6.15-mm2? If so, which one?

It fixes the symptom, yes. Greg complained it's papering over the problem and not a real fix, which is fair enough, but ...

yes, it did seem to be a newly introduced problem in -mm1 or -mm2. To my mind, if we don't have a proper fix, we ought to drop the patch that caused the problem in the first place? Andy .. can you finger which patch that was, I forget ...

M.

#5 lore raw
Quoted 7 lines

It fixes the symptom, yes. Greg complained it's papering over the problem and not a real fix, which is fair enough, but ...

yes, it did seem to be a newly introduced problem in -mm1 or -mm2. To my mind, if we don't have a proper fix, we ought to drop the patch that caused the problem in the first place? Andy .. can you finger which patch that was, I forget ...

The fix I proposed (also attached to this email) fixes a bug introduced in the pci domain patches in greg's tree, specifically this patch:

gregkh-pci-x86-pci-domain-support-struct-pci_sysdata.patch

I believe that my fix is complete in the context of those changes, in that it returns the original semantics. As greg points out this exposes a couple of places where we do have proper domain and node information where it is not supplied. I have a patch or two waiting to be tested which tries to fill in some of the gaps exposed, but the boxes I was testing on have dropped off the network and am waiting for that to be fixed before sending them in. That said I think that if the pci domain patches are accepted then this minimal fix should be applied with them.

-apw

pci device ensure sysdata initialised

[Ok, here is a patch to ensure sysdata is valid for all busses.]

We have been seeing panic's on NUMA systems in pci_call_probe() in 2.6.15-rc5-mm2 and -mm3. It seems that some changes have occured to the meaning of the 'sysdata' for a device such that it is no longer just an integer containing the node, it is now a structure containing the node and other data. However, it seems that we do not always initialise this sysdata before we probe the device.

Below are three examples from a boot with this checked for. The attached patch ensures that we supply a valid sysdata for system busses. Currently we take no account of the node for this bus for no ACPI configured systems. This is unchanged from the -mm1 code.

	Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
	Copyright (c) 1999-2005 Intel Corporation.
	pci_call_probe: starting drv<c03d4be0> dev<dfd16800> id<c03d4734>
	pci_call_probe: dev->bus<dfce6800>
	pci_call_probe: dev->bus->sysdata<00000000>
	pci_call_probe: node<-1>
	e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection

	pci_call_probe: starting drv<c03ef220> dev<dfd17400> id<c03eed00>
	pci_call_probe: dev->bus<dfce6800>
	pci_call_probe: dev->bus->sysdata<00000000>
	pci_call_probe: node<-1>
	Linux Tulip driver version 1.1.13 (December 15, 2004)
	input: AT Translated Set 2 keyboard as /class/input/input0
	tulip0:  EEPROM default media type Autosense.
	tulip0:  Index #0 - Media 10baseT (#0) described by a
		21140 non-MII (0) block.
	tulip0:  Index #1 - Media 100baseTx (#3) described by a
		21140 non-MII (0) block.
	tulip0:  Index #2 - Media 10baseT-FDX (#4) described by a
		21140 non-MII (0) block.
	tulip0:  Index #3 - Media 100baseTx-FDX (#5) described by a
		21140 non-MII (0) block.
	eth1: Digital DS21140 Tulip rev 33 at 0001fc00,
		00:00:BC:0F:08:96, IRQ 28.

	pci_call_probe: starting drv<c040a360> dev<dfd14400> id<c040a0fc>
	pci_call_probe: dev->bus<dfce6600>
	pci_call_probe: dev->bus->sysdata<dfffafa0>
	pci_call_probe: node<0>
	qla1280: QLA1040 found on PCI bus 0, dev 11
---
 arch/i386/pci/common.c |    2 ++
 arch/i386/pci/fixup.c  |    8 +++++---
 arch/i386/pci/legacy.c |    3 ++-
 arch/i386/pci/numa.c   |    8 +++++---
 arch/i386/pci/visws.c  |    4 ++--
 include/asm-i386/pci.h |    1 +
 6 files changed, 17 insertions(+), 9 deletions(-)
arch/i386/pci/common.c +2 -0
diff -upN reference/arch/i386/pci/common.c current/arch/i386/pci/common.c
@@ -29,6 +29,8 @@ unsigned long pirq_table_addr;
 struct pci_bus *pci_root_bus;
 struct pci_raw_ops *raw_pci_ops;
 
+struct pci_sysdata pci_default_sysdata = { .node = -1 };
+
 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
 {
 	return raw_pci_ops->read(pci_domain_nr(bus), bus->number,
arch/i386/pci/fixup.c +5 -3
diff -upN reference/arch/i386/pci/fixup.c current/arch/i386/pci/fixup.c
@@ -25,9 +25,11 @@ static void __devinit pci_fixup_i450nx(s
 		pci_read_config_byte(d, reg++, &subb);
 		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
 		if (busno)
-			pci_scan_bus(busno, &pci_root_ops, NULL);	/* Bus A */
+			pci_scan_bus(busno, &pci_root_ops,
+					&pci_default_sysdata);	/* Bus A */
 		if (suba < subb)
-			pci_scan_bus(suba+1, &pci_root_ops, NULL);	/* Bus B */
+			pci_scan_bus(suba+1, &pci_root_ops,
+					&pci_default_sysdata);	/* Bus B */
 	}
 	pcibios_last_bus = -1;
 }
@@ -42,7 +44,7 @@ static void __devinit pci_fixup_i450gx(s
 	u8 busno;
 	pci_read_config_byte(d, 0x4a, &busno);
 	printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
-	pci_scan_bus(busno, &pci_root_ops, NULL);
+	pci_scan_bus(busno, &pci_root_ops, &pci_default_sysdata);
 	pcibios_last_bus = -1;
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
arch/i386/pci/legacy.c +2 -1
diff -upN reference/arch/i386/pci/legacy.c current/arch/i386/pci/legacy.c
@@ -26,7 +26,8 @@ static void __devinit pcibios_fixup_peer
 			    l != 0x0000 && l != 0xffff) {
 				DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
 				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus(n, &pci_root_ops, NULL);
+				pci_scan_bus(n, &pci_root_ops, 
+						&pci_default_sysdata);
 				break;
 			}
 		}
arch/i386/pci/numa.c +5 -3
diff -upN reference/arch/i386/pci/numa.c current/arch/i386/pci/numa.c
@@ -97,9 +97,11 @@ static void __devinit pci_fixup_i450nx(s
 		pci_read_config_byte(d, reg++, &subb);
 		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
 		if (busno)
-			pci_scan_bus(QUADLOCAL2BUS(quad,busno), &pci_root_ops, NULL);	/* Bus A */
+			pci_scan_bus(QUADLOCAL2BUS(quad,busno), &pci_root_ops,
+					&pci_default_sysdata);	/* Bus A */
 		if (suba < subb)
-			pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), &pci_root_ops, NULL);	/* Bus B */
+			pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), &pci_root_ops,
+					&pci_default_sysdata);	/* Bus B */
 	}
 	pcibios_last_bus = -1;
 }
@@ -124,7 +126,7 @@ static int __init pci_numa_init(void)
 			printk("Scanning PCI bus %d for quad %d\n", 
 				QUADLOCAL2BUS(quad,0), quad);
 			pci_scan_bus(QUADLOCAL2BUS(quad,0), 
-				&pci_root_ops, NULL);
+				&pci_root_ops, &pci_default_sysdata);
 		}
 	return 0;
 }
arch/i386/pci/visws.c +2 -2
diff -upN reference/arch/i386/pci/visws.c current/arch/i386/pci/visws.c
@@ -102,8 +102,8 @@ static int __init pcibios_init(void)
 		"bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
 
 	raw_pci_ops = &pci_direct_conf1;
-	pci_scan_bus(pci_bus0, &pci_root_ops, NULL);
-	pci_scan_bus(pci_bus1, &pci_root_ops, NULL);
+	pci_scan_bus(pci_bus0, &pci_root_ops, &pci_default_sysdata);
+	pci_scan_bus(pci_bus1, &pci_root_ops, &pci_default_sysdata);
 	pci_fixup_irqs(visws_swizzle, visws_map_irq);
 	pcibios_resource_survey();
 	return 0;
include/asm-i386/pci.h +1 -0
diff -upN reference/include/asm-i386/pci.h current/include/asm-i386/pci.h
@@ -9,6 +9,7 @@ struct pci_sysdata {
 	int		domain;		/* PCI domain */
 	int		node;		/* NUMA node */
 };
+extern struct pci_sysdata pci_default_sysdata;
 
 #ifdef CONFIG_PCI_DOMAINS
 static inline int pci_domain_nr(struct pci_bus *bus)