Skip to contentSkip to conversation

kbuild updates

PATCH In review Sam Ravnborg 7 participants 25 messages Jan 9, 2006 – Feb 1, 2006

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kbuild updates

Hi Linus.

Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild.git

Important changes:
o do not build vmlinux as part of make install. Error out if file is missing
o no longer use git as part of make install

The changes has not been in -mm, But most are trivial and it works for me.
The lxdialog change is a preparation for linking in lxdialog with menuconfig.

Sam

 Documentation/kbuild/makefiles.txt         |    4 -
 Kbuild                                     |    6 -
 Makefile                                   |   99 +++++++++++++++--------------
 arch/frv/boot/Makefile                     |    5 -
 arch/i386/Makefile                         |    9 +-
 arch/i386/boot/Makefile                    |    2 
 arch/i386/boot/install.sh                  |   14 ++++
 arch/ia64/Makefile                         |    7 --
 arch/powerpc/Makefile                      |    6 -
 arch/ppc/Makefile                          |    4 -
 arch/x86_64/Makefile                       |    5 +
 arch/x86_64/boot/Makefile                  |    2 
 arch/x86_64/boot/install.sh                |   41 ------------
 fs/xfs/Kbuild                              |    7 +-
 scripts/kconfig/lxdialog/Makefile          |   48 +++-----------
 scripts/kconfig/lxdialog/check-lxdialog.sh |   68 +++++++++++++++++++
 scripts/mod/file2alias.c                   |    3 
 scripts/reference_discarded.pl             |    7 +-
 scripts/setlocalversion                    |    3 
 19 files changed, 182 insertions(+), 158 deletions(-)

Brian Gerst:
kbuild: clean up asm-offsets.h creation
modpost/file2alias: Fix typo

Dave Jones:
kbuild: reference_discarded addition

H. Peter Anvin:
kbuild: drop vmlinux dependency from "make install"

Ryan Anderson:
kbuild: In setlocalversion change -git_dirty to just -dirty

Sam Ravnborg:
kconfig: factor out ncurses check in a shell script
kbuild: remove GCC_VERSION
frv: Use KERNELRELEASE
kbuild/xfs: introduce fs/xfs/Kbuild
kbuild: KERNELRELEASE is only re-defined when buiding the kernel

Tore Anderson:
kbuild: ensure mrproper removes .old_version

#1 lore raw

PATCH 1/11 kconfig: factor out ncurses check in a shell script

Cleaning up the lxdialog Makefile by factoring out the ncurses compatibility checks.
This made the checks much more obvious and easier to extend.

---

 scripts/kconfig/lxdialog/Makefile          |   48 +++++---------------
 scripts/kconfig/lxdialog/check-lxdialog.sh |   67 ++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 36 deletions(-)
 create mode 100644 scripts/kconfig/lxdialog/check-lxdialog.sh

ae215b14bdbd459afe5f371175765fae817062a8

scripts/kconfig/lxdialog/Makefile +12 -36
index a45a13f..8f41d9a 100644
@@ -1,42 +1,18 @@
-HOST_EXTRACFLAGS := -DLOCALE 
-ifeq ($(shell uname),SunOS)
-HOST_LOADLIBES   := -lcurses
-else
-HOST_LOADLIBES   := -lncurses
-endif
+# Makefile to build lxdialog package
+#
 
-ifeq (/usr/include/ncurses/ncurses.h, $(wildcard /usr/include/ncurses/ncurses.h))
-        HOST_EXTRACFLAGS += -I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"
-else
-ifeq (/usr/include/ncurses/curses.h, $(wildcard /usr/include/ncurses/curses.h))
-        HOST_EXTRACFLAGS += -I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"
-else
-ifeq (/usr/include/ncurses.h, $(wildcard /usr/include/ncurses.h))
-        HOST_EXTRACFLAGS += -DCURSES_LOC="<ncurses.h>"
-else
-	HOST_EXTRACFLAGS += -DCURSES_LOC="<curses.h>"
-endif
-endif
-endif
+check-lxdialog   := $(srctree)/$(src)/check-lxdialog.sh
+HOST_EXTRACFLAGS := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+HOST_LOADLIBES   := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags)
+ 
+HOST_EXTRACFLAGS += -DLOCALE 
+
+.PHONY: dochecklxdialog
+$(obj)/dochecklxdialog:
+	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_LOADLIBES)
 
 hostprogs-y	:= lxdialog
-always		:= ncurses $(hostprogs-y)
+always		:= $(hostprogs-y) dochecklxdialog
 
 lxdialog-objs := checklist.o menubox.o textbox.o yesno.o inputbox.o \
 		 util.o lxdialog.o msgbox.o
-
-.PHONY: $(obj)/ncurses
-$(obj)/ncurses:
-	@echo "main() {}" > lxtemp.c
-	@if $(HOSTCC) lxtemp.c  $(HOST_LOADLIBES); then \
-		rm -f lxtemp.c a.out; \
-	else \
-		rm -f lxtemp.c; \
-		echo -e "\007" ;\
-		echo ">> Unable to find the Ncurses libraries." ;\
-		echo ">>" ;\
-		echo ">> You must install ncurses-devel in order" ;\
-		echo ">> to use 'make menuconfig'" ;\
-		echo ;\
-		exit 1 ;\
-	fi
scripts/kconfig/lxdialog/check-lxdialog.sh new file +67 -0

67 lines not on this page · raw message

Signature · 1 line
1.0.GIT
#2 lore raw

Re: [PATCH 01/11] kconfig: factor out ncurses check in a shell script

Quoted 4 lines

Cleaning up the lxdialog Makefile by factoring out the ncurses compatibility checks.
This made the checks much more obvious and easier to extend.

BTW, do you know a nice way to detect ncursesw?

Jan Engelhardt

#3 lore raw

Re: [PATCH 01/11] kconfig: factor out ncurses check in a shell script

Quoted 6 lines · Jan Engelhardt
Quoted 4 lines

Cleaning up the lxdialog Makefile by factoring out the ncurses compatibility checks.
This made the checks much more obvious and easier to extend.

BTW, do you know a nice way to detect ncursesw?

Hi Jan.

I had ncursesw in my mind too when I did this.
If you look at the test implemented to check for ncurses it should be simple to use same principle to check if one can use ncursesw. If gcc does not fail then ncursesw is present.

Care to give it a spin?
Otherwise I will try later this week.

Sam

#4 lore raw

Re: [PATCH 01/11] kconfig: factor out ncurses check in a shell script

Quoted 6 lines

I had ncursesw in my mind too when I did this.
If you look at the test implemented to check for ncurses it should be simple to use same principle to check if one can use ncursesw. If gcc does not fail then ncursesw is present.

Care to give it a spin?

Ah yes, keeping the gray cells in shape; let me give it a twist.

Jan Engelhardt

#5 lore raw

Re: [PATCH 01/11] kconfig: factor out ncurses check in a shell script

In reply to Jan Engelhardt
Quoted 6 lines · Jan Engelhardt
Quoted 4 lines

Cleaning up the lxdialog Makefile by factoring out the ncurses compatibility checks.
This made the checks much more obvious and easier to extend.

BTW, do you know a nice way to detect ncursesw?

Something like this?

scripts/kconfig/lxdialog/Makefile +3 -3
index 8f41d9a..fae3e29 100644
@@ -1,9 +1,9 @@
 # Makefile to build lxdialog package
 #
 
-check-lxdialog   := $(srctree)/$(src)/check-lxdialog.sh
-HOST_EXTRACFLAGS := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
-HOST_LOADLIBES   := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags)
+check-lxdialog  := $(srctree)/$(src)/check-lxdialog.sh
+HOST_EXTRACFLAGS:= $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+HOST_LOADLIBES  := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
  
 HOST_EXTRACFLAGS += -DLOCALE 
 
scripts/kconfig/lxdialog/check-lxdialog.sh +16 -3
index a3c141b..3f172f1 100644
@@ -4,11 +4,22 @@
 # What library to link
 ldflags()
 {
-	if [ `uname` == SunOS ]; then
-		echo '-lcurses'
-	else
+	echo "main() {}" | $compiler -lncursesw -xc - 2> /dev/null
+	if [ $? -eq 0 ]; then
+		echo '-lncursesw'
+		exit
+	fi
+	echo "main() {}" | $compiler -lncurses -xc - 2> /dev/null
+	if [ $? -eq 0 ]; then
 		echo '-lncurses'
+		exit
+	fi
+	echo "main() {}" | $compiler -lcurses -xc - 2> /dev/null
+	if [ $? -eq 0 ]; then
+		echo '-lcurses'
+		exit
 	fi
+	exit 1
 }
 
 # Where is ncurses.h?
@@ -58,6 +69,8 @@ case "$1" in
 		ccflags
 		;;
 	"-ldflags")
+		shift
+		compiler="$@"
 		ldflags
 		;;
 	"*")
#6 lore raw

Re: [PATCH 01/11] kconfig: factor out ncurses check in a shell script

Quoted 15 lines
scripts/kconfig/lxdialog/check-lxdialog.sh +7 -0
+	echo "main() {}" | $compiler -lncursesw -xc - 2> /dev/null
+	if [ $? -eq 0 ]; then
+		echo '-lncursesw'
+		exit
+	fi
+	echo "main() {}" | $compiler -lncurses -xc - 2> /dev/null
+	if [ $? -eq 0 ]; then

echo '-lncurses'

scripts/kconfig/lxdialog/check-lxdialog.sh +6 -0
+		exit
+	fi
+	echo "main() {}" | $compiler -lcurses -xc - 2> /dev/null
+	if [ $? -eq 0 ]; then
+		echo '-lcurses'
+		exit

fi

scripts/kconfig/lxdialog/check-lxdialog.sh line 22

Quoted 1 line
scripts/kconfig/lxdialog/check-lxdialog.sh +1 -0
+	exit 1

You forget to remove a.out, or whatever the compiler produces. I suggest
$compiler -o /dev/null

Jan Engelhardt

#7 lore raw

PATCH 2/11 kbuild: clean up asm-offsets.h creation

In reply to Sam Ravnborg

From: Brian Gerst <[email protected]>
Date: 1136590125 -0500

- Move mkdir out of cmd_offsets
- Add input file to sed command instead of using cat

---

 Kbuild |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

ac448afbcdcc218fd8d177960466ecc4a523722f

Kbuild +2 -3
index 7900391..95d6a00 100644
@@ -22,8 +22,6 @@ sed-$(CONFIG_MIPS) := "/^@@@/s///p"
 
 quiet_cmd_offsets = GEN     $@
 define cmd_offsets
-	mkdir -p $(dir $@); \
-	cat $< | \
 	(set -e; \
 	 echo "#ifndef __ASM_OFFSETS_H__"; \
 	 echo "#define __ASM_OFFSETS_H__"; \
@@ -34,7 +32,7 @@ define cmd_offsets
 	 echo " *"; \
 	 echo " */"; \
 	 echo ""; \
-	 sed -ne $(sed-y); \
+	 sed -ne $(sed-y) $<; \
 	 echo ""; \
 	 echo "#endif" ) > $@
 endef
@@ -45,5 +43,6 @@ arch/$(ARCH)/kernel/asm-offsets.s: arch/
 	$(call if_changed_dep,cc_s_c)
 
 $(obj)/$(offsets-file): arch/$(ARCH)/kernel/asm-offsets.s Kbuild
+	$(Q)mkdir -p $(dir $@)
 	$(call cmd,offsets)
 
Signature · 1 line
1.0.GIT
#8 lore raw

PATCH 3/11 modpost/file2alias: Fix typo

In reply to Sam Ravnborg

From: Brian Gerst <[email protected]>
Date: 1136735635 -0500

SND_MAX should be FF_MAX

---

 scripts/mod/file2alias.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

cc6fa432f5eec26c43fd06c0314cb1c2cae6d9a1

scripts/mod/file2alias.c +1 -1
index e0eedff..be97caf 100644
@@ -417,7 +417,7 @@ static int do_input_entry(const char *fi
 		do_input(alias, id->sndbit, 0, SND_MAX);
 	sprintf(alias + strlen(alias), "f*");
 	if (id->flags&INPUT_DEVICE_ID_MATCH_FFBIT)
-		do_input(alias, id->ffbit, 0, SND_MAX);
+		do_input(alias, id->ffbit, 0, FF_MAX);
 	sprintf(alias + strlen(alias), "w*");
 	if (id->flags&INPUT_DEVICE_ID_MATCH_SWBIT)
 		do_input(alias, id->swbit, 0, SW_MAX);
Signature · 1 line
1.0.GIT
#9 lore raw

PATCH 4/11 kbuild: In setlocalversion change -git_dirty to just -dirty

In reply to Sam Ravnborg

From: Ryan Anderson <[email protected]>
Date: 1136712936 -0500

When building Debian packages directly from the git tree, the appended "git_dirty" is a problem due to the underscore. In order to cause the least problems, change that just to "dirty".

---

 scripts/setlocalversion |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

24d49756aa67322c2def5dc97344615572ac454e

scripts/setlocalversion +1 -1
index f54dac8..9a23825 100644
@@ -17,6 +17,6 @@ if head=`git rev-parse --verify HEAD 2>/
 
 	# Are there uncommitted changes?
 	if git diff-files | read dummy; then
-		printf '%s' -git_dirty
+		printf '%s' -dirty
 	fi
 fi
Signature · 1 line
1.0.GIT
#10 lore raw

PATCH 5/11 kbuild: ensure mrproper removes .old_version

In reply to Sam Ravnborg

From: Tore Anderson <[email protected]>
Date: 1136644480 +0100

If the final linking of vmlinux fails, the file .old_version are left behind. This patch ensures the mrproper target will remove it if present.

---

 Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

50aa88e2877f1375ba79d1be7a0ff4aa563741c7

Makefile +1 -1
index 599e744..50b07fa 100644
@@ -984,7 +984,7 @@ CLEAN_FILES +=	vmlinux System.map \
 
 # Directories & files removed with 'make mrproper'
 MRPROPER_DIRS  += include/config include2
-MRPROPER_FILES += .config .config.old include/asm .version \
+MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h \
                   Module.symvers tags TAGS cscope*
 
Signature · 1 line
1.0.GIT
#11 lore raw

PATCH 6/11 kbuild: reference_discarded addition

In reply to Sam Ravnborg

From: Dave Jones <[email protected]>
Date: 1136533219 -0500

Error: ./fs/quota_v2.o .opd refers to 0000000000000020 R_PPC64_ADDR64 .exit.text

Been carrying this for some time in Red Hat trees.

Keith Ownes <[email protected]> commented:
For our future {in}sanity, add a comment that this is the ppc .opd section, not the ia64 .opd section. ia64 .opd should not point to discarded sections.

Any idea why ppc .opd points to discarded sections when ia64 does not? AFAICT no ia64 object has a useful .opd section, they are all empty or (sometimes) a dummy entry which is 1 byte long. ia64 .opd data is built at link time, not compile time.

---

 scripts/reference_discarded.pl |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

442ce844e139c1e3c23e8b4df13468041ae35721

scripts/reference_discarded.pl +6 -0
index c2d5414..4ee6ab2 100644
@@ -71,6 +71,11 @@ foreach $object (keys(%object)) {
 # printf("ignoring %d conglomerate(s)\n", $ignore);
 
 # printf("Scanning objects\n");
+
+# Keith Ownes <[email protected]> commented:
+# For our future {in}sanity, add a comment that this is the ppc .opd
+# section, not the ia64 .opd section.
+# ia64 .opd should not point to discarded sections.
 $errorcount = 0;
 foreach $object (keys(%object)) {
 	my $from;
@@ -88,6 +93,7 @@ foreach $object (keys(%object)) {
 		    ($from !~ /\.text\.exit$/ &&
 		     $from !~ /\.exit\.text$/ &&
 		     $from !~ /\.data\.exit$/ &&
+		     $from !~ /\.opd$/ &&
 		     $from !~ /\.exit\.data$/ &&
 		     $from !~ /\.altinstructions$/ &&
 		     $from !~ /\.pdr$/ &&
Signature · 1 line
1.0.GIT
#12 lore raw

PATCH 7/11 kbuild: remove GCC_VERSION

In reply to Sam Ravnborg

This was causing some ordering problems. Remove the up-front evaluation and just revaluate the compiler version each time we need it.

(The up-front evaluation was problematic because some architectures modify the value of $(CC)).

---

 Documentation/kbuild/makefiles.txt |    4 ++--
 arch/i386/Makefile                 |    4 ++--
 arch/ia64/Makefile                 |    7 +------
 arch/powerpc/Makefile              |    6 ++----
 arch/ppc/Makefile                  |    3 +--
 5 files changed, 8 insertions(+), 16 deletions(-)

ad14336de8e9cddae9ed29d45bd2e97abb72eaf9

Documentation/kbuild/makefiles.txt +2 -2
index d802ce8..443230b 100644
@@ -1033,9 +1033,9 @@ When kbuild executes the following steps
 
 	Example:
 		#arch/i386/Makefile
-		GCC_VERSION := $(call cc-version)
 		cflags-y += $(shell \
-		if [ $(GCC_VERSION) -ge 0300 ] ; then echo "-mregparm=3"; fi ;)
+		if [ $(call cc-version) -ge 0300 ] ; then \
+			echo "-mregparm=3"; fi ;)
 
 	In the above example -mregparm=3 is only used for gcc version greater
 	than or equal to gcc 3.0.
arch/i386/Makefile +2 -2
index d121ea1..8f6b90e 100644
@@ -39,8 +39,8 @@ include $(srctree)/arch/i386/Makefile.cp
 
 # -mregparm=3 works ok on gcc-3.0 and later
 #
-GCC_VERSION			:= $(call cc-version)
-cflags-$(CONFIG_REGPARM) 	+= $(shell if [ $(GCC_VERSION) -ge 0300 ] ; then echo "-mregparm=3"; fi ;)
+cflags-$(CONFIG_REGPARM) += $(shell if [ $(call cc-version) -ge 0300 ] ; then \
+                            echo "-mregparm=3"; fi ;)
 
 # Disable unit-at-a-time mode, it makes gcc use a lot more stack
 # due to the lack of sharing of stacklots.
arch/ia64/Makefile +1 -6
index 67932ad..f722e1a 100644
@@ -25,7 +25,6 @@ cflags-y	:= -pipe $(EXTRA) -ffixed-r13 -
 		   -falign-functions=32 -frename-registers -fno-optimize-sibling-calls
 CFLAGS_KERNEL	:= -mconstant-gp
 
-GCC_VERSION     := $(call cc-version)
 GAS_STATUS	= $(shell $(srctree)/arch/ia64/scripts/check-gas "$(CC)" "$(OBJDUMP)")
 CPPFLAGS += $(shell $(srctree)/arch/ia64/scripts/toolchain-flags "$(CC)" "$(OBJDUMP)" "$(READELF)")
 
@@ -37,11 +36,7 @@ $(error Sorry, you need a newer version 
 		ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
 endif
 
-ifneq ($(shell if [ $(GCC_VERSION) -lt 0300 ] ; then echo "bad"; fi ;),)
-$(error Sorry, your compiler is too old.  GCC v2.96 is known to generate bad code.)
-endif
-
-ifeq ($(GCC_VERSION),0304)
+ifeq ($(call cc-version),0304)
 	cflags-$(CONFIG_ITANIUM)	+= -mtune=merced
 	cflags-$(CONFIG_MCKINLEY)	+= -mtune=mckinley
 endif
arch/powerpc/Makefile +2 -4
index a13eb57..b98f11b 100644
@@ -76,8 +76,7 @@ LINUXINCLUDE    += $(LINUXINCLUDE-y)
 CHECKFLAGS	+= -m$(SZ) -D__powerpc__ -D__powerpc$(SZ)__
 
 ifeq ($(CONFIG_PPC64),y)
-GCC_VERSION     := $(call cc-version)
-GCC_BROKEN_VEC	:= $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi)
+GCC_BROKEN_VEC	:= $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi)
 
 ifeq ($(CONFIG_POWER4_ONLY),y)
 ifeq ($(CONFIG_ALTIVEC),y)
@@ -189,10 +188,9 @@ TOUT	:= .tmp_gas_check
 # Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
 # instructions.
 # gcc-3.4 and binutils-2.14 are a fatal combination.
-GCC_VERSION	:= $(call cc-version)
 
 checkbin:
-	@if test "$(GCC_VERSION)" = "0304" ; then \
+	@if test "$(call cc-version)" = "0304" ; then \
 		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
 			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
 			echo 'correctly with gcc-3.4 and your version of binutils.'; \
arch/ppc/Makefile +1 -2
index e719a49..98e940b 100644
@@ -128,10 +128,9 @@ TOUT	:= .tmp_gas_check
 # Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
 # instructions.
 # gcc-3.4 and binutils-2.14 are a fatal combination.
-GCC_VERSION	:= $(call cc-version)
 
 checkbin:
-	@if test "$(GCC_VERSION)" = "0304" ; then \
+	@if test "$(call cc-version)" = "0304" ; then \
 		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
 			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
 			echo 'correctly with gcc-3.4 and your version of binutils.'; \
Signature · 1 line
1.0.GIT
#13 lore raw

PATCH 8/11 frv: Use KERNELRELEASE

In reply to Sam Ravnborg

---

 arch/frv/boot/Makefile |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

63b794bfd898899cc8b6d4679d4fdc486606194b

arch/frv/boot/Makefile +2 -2
index d75e0d7..5dfc93f 100644
@@ -57,10 +57,10 @@ initrd:
 # installation
 #
 install: $(CONFIGURE) Image
-	sh ./install.sh $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) Image $(TOPDIR)/System.map "$(INSTALL_PATH)"
+	sh ./install.sh $(KERNELRELEASE) Image $(TOPDIR)/System.map "$(INSTALL_PATH)"
 
 zinstall: $(CONFIGURE) zImage
-	sh ./install.sh $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) zImage $(TOPDIR)/System.map "$(INSTALL_PATH)"
+	sh ./install.sh $(KERNELRELEASE) zImage $(TOPDIR)/System.map "$(INSTALL_PATH)"
 
 #
 # miscellany
Signature · 1 line
1.0.GIT
#14 lore raw

PATCH 9/11 kbuild: drop vmlinux dependency from "make install"

In reply to Sam Ravnborg

From: H. Peter Anvin <[email protected]>
Date: 1136684319 -0800

This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory.

It also updates x86-64 to be in sync with i386.

---

 arch/i386/Makefile          |    5 ++---
 arch/i386/boot/Makefile     |    2 +-
 arch/i386/boot/install.sh   |   14 ++++++++++++++
 arch/x86_64/Makefile        |    5 ++++-
 arch/x86_64/boot/Makefile   |    2 +-
 arch/x86_64/boot/install.sh |   40 +---------------------------------------
 6 files changed, 23 insertions(+), 45 deletions(-)

0d20babd86b40fa5ac55d9ebf31d05f6f7082161

arch/i386/Makefile +2 -3
index 8f6b90e..d3c0409 100644
@@ -103,7 +103,7 @@ AFLAGS += $(mflags-y)
 boot := arch/i386/boot
 
 .PHONY: zImage bzImage compressed zlilo bzlilo \
-	zdisk bzdisk fdimage fdimage144 fdimage288 install kernel_install
+	zdisk bzdisk fdimage fdimage144 fdimage288 install
 
 all: bzImage
 
@@ -125,8 +125,7 @@ zdisk bzdisk: vmlinux
 fdimage fdimage144 fdimage288: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
 
-install: vmlinux
-install kernel_install:
+install:
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
 
 archclean:
arch/i386/boot/Makefile +1 -1
index 1e71382..0fea75d 100644
@@ -100,5 +100,5 @@ zlilo: $(BOOTIMAGE)
 	cp System.map $(INSTALL_PATH)/
 	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
 
-install: $(BOOTIMAGE)
+install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
arch/i386/boot/install.sh +14 -0
index f17b40d..5e44c73 100644
@@ -19,6 +19,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+ 	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 
 if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
arch/x86_64/Makefile +4 -1
index a9cd42e..51d8328 100644
@@ -80,9 +80,12 @@ bzlilo: vmlinux
 bzdisk: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk
 
-install fdimage fdimage144 fdimage288: vmlinux
+fdimage fdimage144 fdimage288: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
 
+install:
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ 
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
arch/x86_64/boot/Makefile +1 -1
index 18c6e91..29f8396 100644
@@ -98,5 +98,5 @@ zlilo: $(BOOTIMAGE)
 	cp System.map $(INSTALL_PATH)/
 	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
 
-install: $(BOOTIMAGE)
+install:
 	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
arch/x86_64/boot/install.sh +1 -39
index 198af15..baaa236 100644
@@ -1,40 +1,2 @@
 #!/bin/sh
-#
-# arch/x86_64/boot/install.sh
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995 by Linus Torvalds
-#
-# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
-#
-# "make install" script for i386 architecture
-#
-# Arguments:
-#   $1 - kernel version
-#   $2 - kernel image file
-#   $3 - kernel map file
-#   $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
-
-# Default install - same as make zlilo
-
-if [ -f $4/vmlinuz ]; then
-	mv $4/vmlinuz $4/vmlinuz.old
-fi
-
-if [ -f $4/System.map ]; then
-	mv $4/System.map $4/System.old
-fi
-
-cat $2 > $4/vmlinuz
-cp $3 $4/System.map
-
-if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+. $srctree/arch/i386/boot/install.sh
Signature · 1 line
1.0.GIT
#15 lore raw

Re: [PATCH 09/11] kbuild: drop vmlinux dependency from "make install"

Quoted 3 lines · Sam Ravnborg

This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory.

Is removing the kernel_install' target considered a userspace interface breakage? ;) Or am I just gonna have to get used to typing make install' again?

Signature · 1 line
"Silly rabbit, kicks are for ribs!" -- Homer Simpson
#16 lore raw

Re: [PATCH 09/11] kbuild: drop vmlinux dependency from "make install"

Quoted 9 lines · Cal Peake
Quoted 3 lines · Sam Ravnborg

This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory.

Is removing the kernel_install' target considered a userspace interface breakage? ;) Or am I just gonna have to get used to typing make install' again?

make install is there to stay. And now where install and kernel_install do the same thing the latter will disappear.
So yes, soon yo have to type less.

Sam

#17 lore raw

Re: [PATCH 09/11] kbuild: drop vmlinux dependency from "make install"

In reply to Sam Ravnborg
Quoted 3 lines · Sam Ravnborg

This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory.

One minor issue I've noticed with this is that I have script that do:

make -j8 vmlinux install

Without the dependency, I think the install is done in parallel, and doesn't get the result of that build. Is there a way I can accomplish the same thing with one make command with the new dependency?

-- Dave

#18 lore raw

Re: [PATCH 09/11] kbuild: drop vmlinux dependency from 'make install'

Quoted 11 lines · Sam Ravnborg
Quoted 3 lines

This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory.

One minor issue I've noticed with this is that I have script that do:

make -j8 vmlinux install

Without the dependency, I think the install is done in parallel, and doesn't get the result of that build.

Correct. All targets on the commandline are evaluated in parallel.

Quoted 2 lines

Is there a way I can accomplish
the same thing with one make command with the new dependency?

No - unfortunately not.

Oh, you may restrict yourself to UP and use make -j1 but that would be a workaround ;-)

Sam

#19 lore raw

Re: [PATCH 09/11] kbuild: drop vmlinux dependency from 'make install'

Quoted 11 lines · "Sam Ravnborg" (on Tue, 31 Jan 2006 22:04:19 +0100 (CET)) wrote:
Quoted 11 lines · Sam Ravnborg
Quoted 3 lines

This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory.

One minor issue I've noticed with this is that I have script that do:

make -j8 vmlinux install

Without the dependency, I think the install is done in parallel, and doesn't get the result of that build.

Quoted 8 lines

Correct. All targets on the commandline are evaluated in parallel.

Quoted 2 lines

Is there a way I can accomplish
the same thing with one make command with the new dependency?

No - unfortunately not.

Oh, you may restrict yourself to UP and use make -j1 but that would be a workaround ;-)

Pseudo code: make install, modules-install etc. depend on other targets if and only if there are multiple targets on the command line. A bare make install will have no dependencies on vmlinux, make install plus other targets will wait for the other targets. Mind you, I still think that removing the dependency to avoid root turds is the wrong approach.

goal := $(sort $(MAKECMDGOALS))
goal_install := $(filter %install,$(goal))
goal_other := $(filter-out %install,$(goal))
ifneq ($(goal_install),)
ifneq ($(goal_other),)

    $(goal_install): $(goal_other)

endif
endif

#20 lore raw

PATCH 10/11 kbuild/xfs: introduce fs/xfs/Kbuild

In reply to Sam Ravnborg

In kbuild the file named 'Kbuild' has precedence over the file named Makefile. Utilise a file named Kbuild to include the 2.6 Makefile for xfs
- since the xfs people likes to keep their arch specific Makefiles separate.

With this patch xfs does no longer rely on the KERNELRELEASE components to be global.

---

 fs/xfs/Kbuild |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
 create mode 100644 fs/xfs/Kbuild

a9aa1ffaac7c8d6f093bb8f7cdeea761a5e25f53

fs/xfs/Kbuild new file +6 -0
new file mode 100644
index 0000000..2566e96
@@ -0,0 +1,6 @@
+#
+# The xfs people like to share Makefile with 2.6 and 2.4.
+# Utilise file named Kbuild file which has precedence over Makefile.
+#
+
+include $(srctree)/$(obj)/Makefile-linux-2.6
Signature · 1 line
1.0.GIT
#21 lore raw

PATCH 11/11 kbuild: KERNELRELEASE is only re-defined when buiding the kernel

In reply to Sam Ravnborg

To avoid running setlocalversion as root no longer (re-)define KERNELRELEASE for each run. With this patch KERNELRELEASE is only re-read when we do an actual kernel build. Rationale behind this is "do as little as possible" when executing make install - as root!

A new file named .kernelrelease is strored in the root of the kernel tree containing the actual version string.
So when we use do a kernel build the .kernelrelease file will be updated. But in all other situations it is left as-is.

To make it more visible the kernel now prints out the version being build. Sample:
Building kernel 2.6.15-g63b794bf-dirty
...
...

The patch also un-exports VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION since all users of these are anyway broken - and none is left in the tree.

---

 Makefile |   95 +++++++++++++++++++++++++++++++++++---------------------------
 1 files changed, 53 insertions(+), 42 deletions(-)

cb58455c48dc43536e5548bdba4e916b2f0cf13d

Makefile +53 -42
index 50b07fa..df60aa1 100644
@@ -141,24 +141,6 @@ VPATH		:= $(srctree)
 
 export srctree objtree VPATH TOPDIR
 
-nullstring :=
-space      := $(nullstring) # end of line
-
-# Take the contents of any files called localversion* and the config
-# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be
-# careful not to include files twice if building in the source
-# directory. LOCALVERSION from the command line override all of this
-
-localver := $(objtree)/localversion* $(srctree)/localversion*
-localver := $(sort $(wildcard $(localver)))
-# skip backup files (containing '~')
-localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f)))
-
-LOCALVERSION = $(subst $(space),, \
-	       $(shell cat /dev/null $(localver)) \
-	       $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 # first, and if a usermode build is happening, the "ARCH=um" on the command
@@ -353,7 +335,10 @@ CFLAGS 		:= -Wall -Wundef -Wstrict-proto
 		   -ffreestanding
 AFLAGS		:= -D__ASSEMBLY__
 
-export	VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \
+# Read KERNELRELEASE from .kernelrelease (if it exists)
+KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
+
+export	KERNELRELEASE \
 	ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
 	CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
 	HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
@@ -551,26 +536,6 @@ export KBUILD_IMAGE ?= vmlinux
 # images. Default is /boot, but you can set it to other values
 export	INSTALL_PATH ?= /boot
 
-# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
-# and try to determine if the current source tree is a release tree, of any sort,
-# or if is a pure development tree.
-#
-# A 'release tree' is any tree with a git TAG associated
-# with it.  The primary goal of this is to make it safe for a native
-# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
-# continue developing against the current Linus tree, without having the Linus
-# tree overwrite the 2.6.9 tree when installed.
-#
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
-
-
-ifdef CONFIG_LOCALVERSION_AUTO
-	localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
-	LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
-endif
-
 #
 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 # relocations required by build roots.  This is not defined in the
@@ -782,6 +747,50 @@ $(sort $(vmlinux-init) $(vmlinux-main)) 
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
+# Build the kernel release string
+# The KERNELRELEASE is stored in a file named .kernelrelease
+# to be used when executing for example make install or make modules_install
+#
+# Take the contents of any files called localversion* and the config
+# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE.
+# LOCALVERSION from the command line override all of this
+
+nullstring :=
+space      := $(nullstring) # end of line
+
+___localver = $(objtree)/localversion* $(srctree)/localversion*
+__localver  = $(sort $(wildcard $(___localver)))
+# skip backup files (containing '~')
+_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
+
+localver = $(subst $(space),, \
+	   $(shell cat /dev/null $(_localver)) \
+	   $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
+	       
+# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
+# and if the SCM is know a tag from the SCM is appended.
+# The appended tag is determinded by the SCM used.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+ifdef CONFIG_LOCALVERSION_AUTO
+	_localver-auto = $(shell $(CONFIG_SHELL) \
+	                  $(srctree)/scripts/setlocalversion $(srctree))
+	localver-auto  = $(LOCALVERSION)$(_localver-auto)
+endif
+
+localver-full = $(localver)$(localver-auto)
+
+# Store (new) KERNELRELASE string in .kernelrelease
+kernelrelease = \
+       $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(localver-full)
+.kernelrelease: FORCE
+	$(Q)rm -f .kernelrelease
+	$(Q)echo $(kernelrelease) > .kernelrelease
+	$(Q)echo "  Building kernel $(kernelrelease)"
+
+
 # Things we need to do before we recursively start building the kernel
 # or the modules are listed in "prepare".
 # A multi level approach is used. prepareN is processed before prepareN-1.
@@ -798,8 +807,7 @@ $(vmlinux-dirs): prepare scripts
 # and if so do:
 # 1) Check that make has not been executed in the kernel src $(srctree)
 # 2) Create the include2 directory, used for the second asm symlink
-
-prepare3:
+prepare3: .kernelrelease
 ifneq ($(KBUILD_SRC),)
 	@echo '  Using $(srctree) as source for kernel'
 	$(Q)if [ -f $(srctree)/.config ]; then \
@@ -986,7 +994,7 @@ CLEAN_FILES +=	vmlinux System.map \
 MRPROPER_DIRS  += include/config include2
 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h \
-                  Module.symvers tags TAGS cscope*
+		  .kernelrelease Module.symvers tags TAGS cscope*
 
 # clean - Delete most, but leave enough to build external modules
 #
@@ -1072,6 +1080,7 @@ help:
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  kernelrelease	  - Output the release version string'
+	@echo  '  kernelversion	  - Output the version stored in Makefile'
 	@echo  ''
 	@echo  'Static analysers'
 	@echo  '  buildcheck      - List dangling references to vmlinux discarded sections'
@@ -1293,6 +1302,8 @@ checkstack:
 
 kernelrelease:
 	@echo $(KERNELRELEASE)
+kernelversion:
+	@echo $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
 # FIXME Should go into a make.lib or something 
 # ===========================================================================
Signature · 1 line
1.0.GIT
#22 lore raw

[PATCH 12/11] kbuild: re-export VERSION, PATCHLEVEL, SUBLEVEL

In reply to Sam Ravnborg

One last minute patch added to the tree:

kbuild: re-export VERSION, PATCHLEVEL, SUBLEVEL

Eric Sandeen <[email protected]> pointed out that it is usefull to have access to VERSION, PATCHLEVEL, SUBLEVEL in external modules, and gooling a litte confirmed this.
So re-export them.
Usage within the kernel is still discouraged but possible.

---
commit 4f0210b9c4889eede9f8f379f93570c01998ccb9
tree 0883096acb3bc46e65a6873b777f01214d6a7852
parent cb58455c48dc43536e5548bdba4e916b2f0cf13d
author Sam Ravnborg <[email protected]> Mon, 09 Jan 2006 22:48:34 +0100 committer Sam Ravnborg <[email protected]> Mon, 09 Jan 2006 22:48:34 +0100

 Makefile |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Makefile +1 -1
index df60aa1..1d1afa5 100644
@@ -338,7 +338,7 @@ AFLAGS		:= -D__ASSEMBLY__
 # Read KERNELRELEASE from .kernelrelease (if it exists)
 KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
 
-export	KERNELRELEASE \
+export	VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE \
 	ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
 	CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
 	HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
#23 lore raw
In reply to Sam Ravnborg
Quoted 3 lines · Sam Ravnborg

Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild.git

Ok, pulled.

However, fixing up a trivial conflict in i386/Makefile, I noticed this:

	cflags-$(CONFIG_REGPARM) += $(shell if [ $(call cc-version) -ge 0300 ] ; then \
				    echo "-mregparm=3"; fi ;)

and it strikes me that this is WRONG.

It's wrong for some subtle reasons: it means that CONFIG_REGPARM is set whether or not it is actually _used_, which means that anybody who depends on CONFIG_REGPARM in the sources is just screwed.

Now, for this particular usage, the only breakage is in the i386 <asm/module.h>, which will report "REGPARM" in MODULE_REGPARM regardless of whether the kernel was compiled with -mregparm=3 or not. So it's mainly cosmetic.

But it strikes me that we'd be a _lot_ better off if the Kconfig phase would check the compiler version, instead of us checking it dynamically a hundred times in the Makefiles. It would be more efficient, and we could make things like this more _correct_.

Comments?

Linus

#24 lore raw

PATCH 1/1 i386: remove gcc version check for CONFIG_REGPARM

Quoted 14 lines · Linus Torvalds
Quoted 3 lines · Sam Ravnborg

Please pull from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuild.git

Ok, pulled.

However, fixing up a trivial conflict in i386/Makefile, I noticed this:

	cflags-$(CONFIG_REGPARM) += $(shell if [ $(call cc-version) -ge 0300 ] ; then \
				    echo "-mregparm=3"; fi ;)
Quoted 6 lines

and it strikes me that this is WRONG.

It's wrong for some subtle reasons: it means that CONFIG_REGPARM is set whether or not it is actually _used_, which means that anybody who depends on CONFIG_REGPARM in the sources is just screwed.
...

The change from Sam's tree conflicted with my patch to completely remove the version check since we do no longer support any gcc < 3.0.

Patch below.

Quoted 1 line

Linus

cu
Adrian

<-- snip -->

Since we do no longer support any gcc < 3.0, there's no need to check for it..

arch/i386/Makefile renamed from arch/i386/Makefile.old +1 -4
@@ -37,10 +37,7 @@
 # CPU-specific tuning. Anything which can be shared with UML should go here.
 include $(srctree)/arch/i386/Makefile.cpu
 
-# -mregparm=3 works ok on gcc-3.0 and later
-#
-cflags-$(CONFIG_REGPARM) += $(shell if [ $(call cc-version) -ge 0300 ] ; then \
-                            echo "-mregparm=3"; fi ;)
+cflags-$(CONFIG_REGPARM) += -mregparm=3
 
 # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
 # a lot more stack due to the lack of sharing of stacklots: