Skip to contentSkip to conversation

'serial' cannot be built as module

PATCH New [email protected] 2 participants 3 messages Jan 14, 2006 – Jan 19, 2006 2 messages not in the archive

lore
Share & tools
lore
#0 lore raw

I've already tried reporting this to the maintainer in the MAINTAINERS file, but received no response (mail originally sent 15'th of november)

Essentially, the 'serial' module is not, apparently, being built when set as modular. I definitely know it's not being installed when I do make modules_install.

However, if I include it in the kernel, it works. The 'symbol' is SERIAL_8250 according to the help in menuconfig.

I'd really like to have this fixed, as I try to reduce the size of the kernel that I boot, as I have to load the kernel off a floppy disk.

Timothy C. McGrath

#1 lore raw
Quoted 2 lines · On Sat, Jan 14, 2006 at 04:21:42AM -0500, [email protected] wrote:

I've already tried reporting this to the maintainer in the MAINTAINERS file, but received no response (mail originally sent 15'th of november)

My mail server has no record of this for the 15th - it never reached me. Maybe you mis-copied the address?

Quoted 9 lines

Essentially, the 'serial' module is not, apparently, being built when set as modular. I definitely know it's not being installed when I do make modules_install.

However, if I include it in the kernel, it works. The 'symbol' is SERIAL_8250 according to the help in menuconfig.

I'd really like to have this fixed, as I try to reduce the size of the kernel that I boot, as I have to load the kernel off a floppy disk.

There's nothing which requires fixing.

If you read the help for that option, you will find that it's called "8250" not "serial". It also depends on serial_core.

Signature · 3 lines
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core

A message that is not in the archive (sent off-list or not yet received): 20060118112121.GA10343@roll

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw

PATCH 1/1 serial: 8250 Documentation fix

From: Timothy Charles McGrath <[email protected]>

This fixes the documentation error for 'SERIAL_8250' in drivers/serial/Kconfig

This applies vs 2.6.15.1

---

drivers/serial/Kconfig renamed from drivers/serial/Kconfig.orig +1 -1
@@ -23,7 +23,7 @@ config SERIAL_8250
 	  work.)
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called serial.
+	  module will be called 8250.
 	  [WARNING: Do not compile this driver as a module if you are using
 	  non-standard serial ports, since the configuration information will
 	  be lost when the driver is unloaded.  This limitation may be lifted