Skip to contentSkip to conversation

Problems building

DISCUSSION Gain Paolo Mureddu 2 participants 3 messages Jan 18, 2006

lore
Share & tools
lore
#0 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

For some reason I am getting a strange message when I try to build
either -ck1 or 2, another message I tried to send to the list seems to not have gotten where I intended to, I'm quoting that message here also:

Quoted 19 lines · Gain Paolo Mureddu

So I have been struggling to get this kernel built, and apparently I've narrowed this down to the sched_iso3.2 and/or isobatch_ionice patches, however I can't be fully certain. Here is what is dumped to the console, I've gotten two dumps, this and one concerning sched.o, which I am still investigating. So here goes the dump:

<build_dump> .... [snip] CC init/do_mounts_md.o In file included from include/linux/bio.h:25, from include/linux/blkdev.h:14, from include/linux/raid/md.h:21, from init/do_mounts_md.c:2:
include/linux/ioprio.h: En la función ?task_nice_ioprio?:
include/linux/ioprio.h:58: error: ?SCHED_BATCH? not declared here (first use in this function) include/linux/ioprio.h:58: error:
(Each undeclared identifier is only reported once include/linux/ioprio.h:58: error: for each function it appears in.) include/linux/ioprio.h:60: error: ?SCHED_ISO? not declared here (first use in this function) make[1]: *** [init/do_mounts_md.o] Error 1 make: *** [init] Error 2 </build_dump> Anyone else with troubles in x86_64 systems?

Quoted 2 lines

TIA!

I get the same error, thus far I know that the file in question (iprio.h) inclues sched.h and that in sched.h SCHED_BATCH and SCHED_ISO are defined, so why am I getting this error in the said function, is beyond me.

Any pointers?

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org

iD8DBQFDzY+aXM+XOp70dwoRArWhAJ0QLlLrb5yGH+qOr0ByJVdAQDskCwCfTy8K MXHVznEopuMqiaK/xh1PLmw=
=5WjR
-----END PGP SIGNATURE-----

#1 lore raw
Quoted 3 lines · Gain Paolo Mureddu

For some reason I am getting a strange message when I try to build
either -ck1 or 2, another message I tried to send to the list seems to not have gotten where I intended to, I'm quoting that message here also:

The list is filtered due to my minimal resources and inability to have any formal spam filtering so only members or approved emails get through and everything else silently dropped. Sorry about any inconvenience. I've added your email to accept and cc'ed the mailing list now.

Quoted 20 lines
Quoted 19 lines · Gain Paolo Mureddu

So I have been struggling to get this kernel built, and apparently I've narrowed this down to the sched_iso3.2 and/or isobatch_ionice patches, however I can't be fully certain. Here is what is dumped to the console, I've gotten two dumps, this and one concerning sched.o, which I am still investigating. So here goes the dump:

<build_dump> .... [snip] CC init/do_mounts_md.o In file included from include/linux/bio.h:25, from include/linux/blkdev.h:14, from include/linux/raid/md.h:21, from init/do_mounts_md.c:2:
include/linux/ioprio.h: En la función ?task_nice_ioprio?:
include/linux/ioprio.h:58: error: ?SCHED_BATCH? not declared here (first use in this function) include/linux/ioprio.h:58: error:
(Each undeclared identifier is only reported once include/linux/ioprio.h:58: error: for each function it appears in.) include/linux/ioprio.h:60: error: ?SCHED_ISO? not declared here (first use in this function) make[1]: *** [init/do_mounts_md.o] Error 1 make: *** [init] Error 2 </build_dump> Anyone else with troubles in x86_64 systems?

Quoted 8 lines
Quoted 1 line

TIA!

I get the same error, thus far I know that the file in question (iprio.h) inclues sched.h and that in sched.h SCHED_BATCH and SCHED_ISO are defined, so why am I getting this error in the said function, is beyond me.

Any pointers?

These errors do not occur with the full patch. Are you using any split patches or just the full patch? Separating out patches is not a trivial thing to do.

Cheers,
Con

#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 44 lines · Con Kolivas
Quoted 4 lines · Gain Paolo Mureddu

For some reason I am getting a strange message when I try to build either -ck1 or 2, another message I tried to send to the list seems to not have gotten where I intended to, I'm quoting that message here also:

The list is filtered due to my minimal resources and inability to have any formal spam filtering so only members or approved emails get through and everything else silently dropped. Sorry about any inconvenience. I've added your email to accept and cc'ed the mailing list now.

Quoted 30 lines
Quoted 21 lines · Gain Paolo Mureddu

So I have been struggling to get this kernel built, and apparently I've narrowed this down to the sched_iso3.2 and/or isobatch_ionice patches, however I can't be fully certain. Here is what is dumped to the console, I've gotten two dumps, this and one concerning sched.o, which I am still investigating. So here goes the dump:

<build_dump> .... [snip] CC init/do_mounts_md.o In file included from include/linux/bio.h:25, from include/linux/blkdev.h:14, from include/linux/raid/md.h:21, from init/do_mounts_md.c:2: include/linux/ioprio.h: En la función ?task_nice_ioprio?: include/linux/ioprio.h:58: error:
?SCHED_BATCH? not declared here (first use in this function) include/linux/ioprio.h:58: error: (Each undeclared identifier is only reported once include/linux/ioprio.h:58: error: for each function it appears in.) include/linux/ioprio.h:60: error:
?SCHED_ISO? not declared here (first use in this function) make[1]: *** [init/do_mounts_md.o] Error 1 make: *** [init] Error 2 </build_dump> Anyone else with troubles in x86_64 systems?

Quoted 1 line

TIA!

I get the same error, thus far I know that the file in question (iprio.h) inclues sched.h and that in sched.h SCHED_BATCH and SCHED_ISO are defined, so why am I getting this error in the said function, is beyond me.

Quoted 8 lines
Quoted 1 line

Any pointers?

These errors do not occur with the full patch. Are you using any split patches or just the full patch? Separating out patches is not a trivial thing to do.

Cheers, Con

I'm using the broken-out tree as I am trying to integrate the patches into a custom Fedora Kernel (basically Fedora's kernel patches, with CK added), and given the nature of RPM build (well not that, but the way the .speck is put together for Fedora) I chose to go with the broken out tree and apply most patches (those which are not repeted) one by one. I apparently found out what the problem was: for some reason schedbatch and schediso were failing at placing the #define's in place for SCHED_BATCH and SCHED_ISO in sched.h, an easy fix when done by hand, directly to the file in question. I am trying to see how to merge these two into one, but you're right, I may be off better going with the "full" version rather than the broken-out (it's given me more head-aches than it is apparently worth having! hehe)

Thanks for your reply and for adding my e-mail, Con. I thought this e-mail address was already allowed to send e-mail to the list...

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org

iD8DBQFDzZWwXM+XOp70dwoRAtvQAJ4lJu6AORDSxdqtJnL0ZCYIZLZJwgCeL/FK bCzB0TqywrBPSReH175ZtMQ=
=xklM
-----END PGP SIGNATURE-----