CD writing in future Linux (stirring up a hornets' nest)
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 3 lines · Joerg Schilling
People like to run cdrecord -scanbus in order to find a list of usable devices. People like to see all SCSI devices in a single name space as they are all using the same protocol for communication.
Not me. I would just like to see a list of /dev/name entries, rather than know anything about scsi. Better yet, I wouldn't want to know anything about the devices. It should just work.
Signature · 3 lines
Heikki Orsila Barbie's law: [email protected] "Math is hard, let's go shopping!" http://www.iki.fi/shd
Quoted 2 lines · Joerg Schilling
People like to run cdrecord -scanbus in order to find a list of usable devices.
People like to see all SCSI devices in a single name space as they are all using the same protocol for communication.
Except that the majority of CD writers today are NOT SCSI devices. They may use the MMC command set from SCSI for interface purposes, but they are on an ATA or USB bus. cdrecord tries to fabricate some kind of device numbering assigning SCSI-like bus and LUN numbers for the devices when such a numbering has no basis in any kind of reality.
We have all SCSI devices in a single namespace, that is what /dev is for. That is the name that the system/kernel provides for applications to use, and that is what the application should use, not some kind of bizarre invented numbering scheme built on top of that.
Signature · 3 lines
Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from [email protected] Home Page: http://www.roberthancock.com/
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 11 lines · Joerg Schilling
Quoted 4 lines · Jan Engelhardt
It's shorter than
/dev/c0t0d0s0? Well, I think it's because people think in terms of connectors (my drive is IDE therefore it must be hdc) rather than protocol (my drive does ATAPI therefore it must be/dev/scsi/c0t0d0s0).Is there any reason why the people with small PCs should dominate the people with big machines?
If you use
/dev/hd*, you loose control after you add more than ~ 6-10 disks.
So you'll create a symlink. (If you're Ingvar Kamprad, it will be named bjørn.)
Quoted 2 lines
The systematical attempt is easy to remember even with a big amount of external hardware.
If you
- add a SCSI controler
- add an USB burner
- connect to an aoe/iscsi-device(?),
it will get a random ID. If you reboot (or just plug out/plug in), it will be randomly different. The same thing may happen after a system upgrade, possibly depending on the linker.
In these cases, there is nothing you can remember, and you'll have to run -scanbus in order to find out if your burner is 0.8.15 or maybe 32.16.8 _each_ time you want to burn a CD. But you _can_ remember (or write into your config files) that it will be named /udev/cdr/LITE-ON_LTR-48246K.
Having to find out the magic number of the day is usurally worse than using the very same name you usurally use to identify an object. If you see an advantage, let the ATAPI bus be -3, translate -3,$n,0.0 to "/dev/hd".chr(96+$n) and everybody will be happy.
Signature · 2 lines
Ich danke GMX dafür, die Verwendung meiner Adressen mittels per SPF verbreiteten Lügen zu sabotieren.
Quoted 7 lines · Bodo Eggert
If you
- add a SCSI controler
- add an USB burner
- connect to an aoe/iscsi-device(?),
it will get a random ID. If you reboot (or just plug out/plug in), it will be randomly different. The same thing may happen after a system upgrade, possibly depending on the linker.
This is a limitation of the implementation used on Linux and not true for e.g. Solaris.
Jörg
Signature · 4 lines
EMail:[email protected] (home) Jörg Schilling D-13353 Berlin [email protected] (uni) [email protected] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Joerg Schilling schrieb am 2006-02-03:
Quoted 2 lines
This is a limitation of the implementation used on Linux and not true for e.g. Solaris.
Linux is not Solaris.
Do you want your application to work with Linux,
because it brings customers?
If yes, listen to kernel developers if they say "you don't need that feature". Note I do not consider myself kernel developer. I'm a bystander who's trying to help out.
Signature · 1 line
Matthias Andree
Quoted 5 lines · Matthias Andree
Joerg Schilling schrieb am 2006-02-03:
Quoted 2 lines
This is a limitation of the implementation used on Linux and not true for e.g. Solaris.
Quoted 8 lines
Linux is not Solaris.
Do you want your application to work with Linux,
because it brings customers?If yes, listen to kernel developers if they say "you don't need that feature". Note I do not consider myself kernel developer. I'm a bystander who's trying to help out.
????
Kernel developers should listen to the right application developers (in special when they may have more kernel skills) to find out what's needed.
Jörg
Signature · 4 lines
EMail:[email protected] (home) Jörg Schilling D-13353 Berlin [email protected] (uni) [email protected] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Hi,
Quoted 12 lines · Joerg Schilling
Quoted 10 lines · Matthias Andree
Joerg Schilling schrieb am 2006-02-03:
Quoted 2 lines
This is a limitation of the implementation used on Linux and not true for e.g. Solaris.
Linux is not Solaris.
Do you want your application to work with Linux,
because it brings customers?
Quoted 7 lines
Quoted 3 lines
If yes, listen to kernel developers if they say "you don't need that feature". Note I do not consider myself kernel developer. I'm a bystander who's trying to help out.
????
Kernel developers should listen to the right application developers
Yes, to the _right_ ones. You are soo right.
Quoted 2 lines
(in special when they may have more kernel skills) to find out what's needed.
...
Have a nice day,
Signature · 3 lines
René Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
http://www.exactcode.de | http://www.t2-project.org
+49 (0)30 255 897 45Quoted 15 lines · Joerg Schilling
Quoted 5 lines · Matthias Andree
Joerg Schilling schrieb am 2006-02-03:
Quoted 2 lines
This is a limitation of the implementation used on Linux and not true for e.g. Solaris.
Quoted 8 lines
Linux is not Solaris.
Do you want your application to work with Linux,
because it brings customers?If yes, listen to kernel developers if they say "you don't need that feature". Note I do not consider myself kernel developer. I'm a bystander who's trying to help out.
Quoted 7 lines
????
Kernel developers should listen to the right application developers (in special when they may have more kernel skills) to find out what's needed.
From what I read, you need a way to map a short ID (possibly formed like
\mathbb{N}^4) to a (devicename, ID')-tupel, where ID' may be ID, a dummy value or something completely different.
With the old /dev/sg-scheme, you had a hard time assigning /dev/sg_num_of_the_day to a device, and you had to enqure each for the ID in order to at least give a stable name. Obviously this was bad, therefore it was superseded by the current method, making /dev/sg obsolete. It is still supported, but nobody will enheance it to include IDE.
With the current mechanism, you can assign a user-defined name like /dev/scsi/host1/bus2/id3/lun4/cd, /dev/scsi/1.2.3.4, /dev/bjørn or /dev/cdr/vendor_model. Obviously some are hard to type, and some are designed to be typed by the user. In the later case, the user should be allowed to use these names even if it isn't portable, and in the former cases, having a nice thing.
For systems using /dev/scsi/1.2.3.4 etc., you can enumerate all devices by walking a list of paths and trying each device in turn, and you can find the device node using a regular expression.
On systems using /dev/cdr/vendor_model or /dev/bjørn, you can't list all devices yourself, but maybe you can exec a user-defined program doing this work for you. In order to find the device again, you can either make the list be (device node, ID), or define a reverse switch giving you just the device node. I'd prefer the later, since that'd let you handle device names containing spaces.
I'd use a script for both cases, and since many systems will use the numeric scheme, maybe provide a default script for them. If the user or the distribution doesn't use numeric IDs, they can create their own script. (Off cause you'll still need the sg-scanning for 2.4 kernels).
Example for my system, obviously slightly untested:
---/etc/default/cdrecord:---
#aliases
toshiba TOSHIBA_XM-6201TA -1 -1
liteon LITE-ON_LTR-48246K 40 16m
apple MATSHITA_CR-8004 -1 -1
CDR_DEVICE = LITE-ON_LTR-48246Kenumerate_devices_bin = /usr/lib/cdrecord-scandevices.sh
---
---/usr/lib/cdrecord-scandevices.sh---
#!/bin/sh
if [ "$1" == "-r" ]; then # reverse mapping
exec /usr/bin/find /dev/cd{,r} -follow -name "$2"else
exec /usr/bin/find /dev/cd{,r} -follow -type b -printf "%f\n"
fi
---
---default script---
#!/bin/sh
if [ "$1" == "-r" ]; then # reverse mapping
case "$2" in -1.* ) a="`echo "$2"|sed -e \ 's,\(.*\)\.\(.*\)\.\(.*\)\.\(.*\),.*[^0-9]\2[^0-9]+\3[^0-9]*,'`" /usr/bin/find /dev/ide/ -regex "$a" -type b ;; *) a="`echo "$2"|sed -e \ 's,\(.*\)\.\(.*\)\.\(.*\)\.\(.*\),.*[^0-9]\1[^0-9]+\2[^0-9]+\3[^0-9]+\4[^0-9]*,'`" /usr/bin/find /dev/scsi/ -regex "$a" -type b ;; esac else /usr/bin/find /dev/ide/ -type b \! -regex '.*part[0-9]+' \ | sed -e \
's/[^0-9]/./g;s/\.\.*/\./g;s/^\.*//;s/\.*$//;s/^/-1./;s/$/.0/'
/usr/bin/find /dev/scsi/ \! -regex '.*part[0-9]+' -type b \ | sed -e 's/[^0-9]/./g;s/\.\.*/\./g;s/^\.*//;s/\.*$//'
fi
---
Signature · 1 line
One enemy soldier is never enough, but two is entirely too many.
Joerg Schilling schrieb am 2006-02-06:
Quoted 3 lines
Kernel developers should listen to the right application developers (in special when they may have more kernel skills) to find out what's needed.
Your skills are misrepresenting facts, ignoring uncomfortable questions, and shifting the blame you have to take on others. These are skills that make you belong to the "wrong" application developers that a kernel developer will not listen to. You demand cooperation, but you only see it as cooperation if people do as _you_ say. You put up artificial limits in your applications to "prove" some kernel is wrong.
Is there anyone who does not see this as some kind of campaign of yours?
Signature · 1 line
Matthias Andree