Skip to contentSkip to conversation

libata updates

PATCH New Jeff Garzik 1 participant 1 message Feb 1, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libata updates

Please pull from 'upstream-fixes' branch of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

to receive the following updates:

 drivers/scsi/ahci.c |   19 +++++++++++++++----
 1 files changed, 15 insertions(+), 4 deletions(-)

Jeff Garzik:
[libata ahci] Isolate Intel-ism, add JMicron JMB360 support [libata ahci] add another JMicron pci id

drivers/scsi/ahci.c +15 -4
index 19bd346..a800fb5 100644
@@ -286,6 +286,10 @@ static const struct pci_device_id ahci_p
 	  board_ahci }, /* ICH8M */
 	{ PCI_VENDOR_ID_INTEL, 0x282a, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 	  board_ahci }, /* ICH8M */
+	{ 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	  board_ahci }, /* JMicron JMB360 */
+	{ 0x197b, 0x2363, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	  board_ahci }, /* JMicron JMB363 */
 	{ }	/* terminate list */
 };
 
@@ -802,7 +806,6 @@ static int ahci_host_init(struct ata_pro
 	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
 	void __iomem *mmio = probe_ent->mmio_base;
 	u32 tmp, cap_save;
-	u16 tmp16;
 	unsigned int i, j, using_dac;
 	int rc;
 	void __iomem *port_mmio;
@@ -836,9 +839,13 @@ static int ahci_host_init(struct ata_pro
 	writel(0xf, mmio + HOST_PORTS_IMPL);
 	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
 
-	pci_read_config_word(pdev, 0x92, &tmp16);
-	tmp16 |= 0xf;
-	pci_write_config_word(pdev, 0x92, tmp16);
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		u16 tmp16;
+
+		pci_read_config_word(pdev, 0x92, &tmp16);
+		tmp16 |= 0xf;
+		pci_write_config_word(pdev, 0x92, tmp16);
+	}
 
 	hpriv->cap = readl(mmio + HOST_CAP);
 	hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
@@ -1082,6 +1089,10 @@ static int ahci_init_one (struct pci_dev
 	if (have_msi)
 		hpriv->flags |= AHCI_FLAG_MSI;
 
+	/* JMicron-specific fixup: make sure we're in AHCI mode */
+	if (pdev->vendor == 0x197b)
+		pci_write_config_byte(pdev, 0x41, 0xa1);
+
 	/* initialize adapter */
 	rc = ahci_host_init(probe_ent);
 	if (rc)