tcpdump causes kernel panic
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · [email protected] wrote:
http://bugzilla.kernel.org/show_bug.cgi?id=6009
------- Additional Comments From [email protected] 2006-02-04 18:42 ------- James,
Quoted 8 lines
Initially, the kernel panic when we run our multicast C++ application for about 20 minutes before the panic occured. What I accidentally descovered was that if I run tcpdump the panic occures much faster, about 2 minutes from start to the panic.
I upgraded the firmware on the 3ware SATA array controller and the device driver, 3w-xxx.ko, per instruction of 3ware developers.
Even with this new firmware I get same results.
No, there's no kernel panic here.
What we have is two things:
a) A kernel _warning_, telling us that we're doing illegal things from softirq context in the scsi stack.
This is a known bug. It's possible that the _probability_ of this happening is increased when there's a lot of network traffic happening, because that causes more softirq activity.
b) The 3ware driver is shitting itself:
messages.4:Jan 6 12:15:41 chilsp010 kernel: 3w-9xxx: scsi0: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:. messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi0 : 3ware 9000 Storage Controller messages.4:Jan 6 12:15:41 chilsp010 kernel: 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfeaffc00, IRQ: 217. messages.4:Jan 6 12:15:41 chilsp010 kernel: 3w-9xxx: scsi0: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8. messages.4:Jan 6 12:15:41 chilsp010 kernel: Vendor: AMCC Model: 9500S-8 DISK Rev: 2.06 messages.4:Jan 6 12:15:41 chilsp010 kernel: Type: Direct-Access ANSI SCSI revision: 03 messages.4:Jan 6 12:15:41 chilsp010 kernel: SCSI device sda: 390602752 512-byte hdwr sectors (199989 MB) messages.4:Jan 6 12:15:41 chilsp010 kernel: SCSI device sda: drive cache: write back, no read (daft) messages.4:Jan 6 12:15:41 chilsp010 kernel: sda: sda1 sda2 messages.4:Jan 6 12:15:41 chilsp010 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi: On host 0 channel 0 id 0 only 511 (max_scsi_report_luns) of 493425154 luns reported, try increasing max_scsi_report_luns. messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi: host 0 channel 0 id 0 lun 0xb0b800008ed88ec0 has a LUN larger than currently supported. messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi: host 0 channel 0 id 0 lun 0xfbbe007cbf0006b9 has a LUN larger than currently supported. messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi: host 0 channel 0 id 0 lun 0x0002f3a4ea210600 has a LUN larger than currently supported. messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi: host 0 channel 0 id 0 lun 0x00bebe073804750b has a LUN larger than currently supported. messages.4:Jan 6 12:15:41 chilsp010 kernel: scsi: host 0 channel 0 id 0 lun 0x83c61081fefe0775 has a LUN larger than currently supported.
I don't know why b) is happening.
Can you please confirm that the occurrence of b) is increased if there's a tcpdump happening? I don't believe that's the case, because b) happened at boot.
In other words, we have two coompletely unrelated bugs. Do you agree?