THE LINUX/I386 BOOT PROTOCOL - Breaking the 256 limit - Resubmit
PATCH 1/1 THE LINUX/I386 BOOT PROTOCOL - Breaking the 256 limit - Resubmit
Extending the kernel parameters to a size of 1024 on boot protocol >=2.02 for i386 and x86_64 architectures.
---
Hello,
This patch was submitted a long ago, but did not find its way into the kernel, but was not rejected as well.
Current implementation allows the kernel to receive up to 255 characters from the bootloader.
In current environment, the command-line is used in order to specify many values, including suspend/resume, module arguments, splash, initramfs and more.
255 characters are not enough anymore.
Please consider to merge.
If any of you think that this should be applied for other architectures, please reply.
Current architectures that have 256 limit are:
alpha, cris, i386, m64k, mips, sh, sh64, sparc, sparc64, x86_64, xtensa
Current architectures that have 512 values are:
frv(512), h8300(512), ia64(512), m32r(512), m68knommu(512), mips(512), powerpc(512), v850(512)
Current architectures that are OK:
arm(1024), arm26(1024), parisc(1024)
Current strange ones:
s390(896) - I guess IBM has a good reason for this constant...
Best Regards,
Alon Bar-Lev
Documentation/i386/boot.txt +5 -5
@@ -235,11 +235,8 @@ loader to communicate with the kernel. relevant to the boot loader itself, see "special command line options" below. -The kernel command line is a null-terminated string currently up to -255 characters long, plus the final null. A string that is too long -will be automatically truncated by the kernel, a boot loader may allow -a longer command line to be passed to permit future kernels to extend -this limit. +The kernel command line is a null-terminated string. A string that is too +long will be automatically truncated by the kernel. If the boot protocol version is 2.02 or later, the address of the kernel command line is given by the header field cmd_line_ptr (see
@@ -260,6 +257,9 @@ command line is entered using the follow covered by setup_move_size, so you may need to adjust this field. + The kernel command line *must* be 256 bytes including the + final null. + **** SAMPLE BOOT CONFIGURATION
include/asm-i386/param.h +1 -1
@@ -19,6 +19,6 @@#endif #define MAXHOSTNAMELEN 64/* max length of hostname */ -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 1024#endif
include/asm-i386/setup.h +1 -1
@@ -17,7 +17,7 @@#define MAX_NONPAE_PFN (1 << 20)#define PARAM_SIZE 4096 -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 1024#define OLD_CL_MAGIC_ADDR 0x90020#define OLD_CL_MAGIC 0xA33F
include/asm-x86_64/setup.h +1 -1
@@ -1,6 +1,6 @@#ifndef _x8664_SETUP_H#define _x8664_SETUP_H -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 1024#endif
Quoted 16 lines · On Fri, 03 Feb 2006 22:32:29 +0200 Alon Bar-Lev wrote:
Extending the kernel parameters to a size of 1024 on boot protocol >=2.02 for i386 and
x86_64architectures.Signed-off-by Alon Bar-Lev <[email protected]>---
Hello,
This patch was submitted a long ago, but did not find its way into the kernel, but was not rejected as well.
Current implementation allows the kernel to receive up to 255 characters from the bootloader.
Quoted 7 lines
In current environment, the command-line is used in order to specify many values, including suspend/resume, module arguments, splash, initramfs and more.
255 characters are not enough anymore.
Please consider to merge.
Please explain this comment and why it is being added:
+ The kernel command line *must* be 256 bytes including the
+ final null.
+
thanks,
---
~Randy
Hello,
Since I removed this from the main text:
Documentation/i386/boot.txt loader to communicate with the kernel. · line 239
Quoted 7 lines
Documentation/i386/boot.txt +2
-5-The kernel command line is a null-terminated string currently up to -255 characters long, plus the final null. A string that is too long -will be automatically truncated by the kernel, a boot loader may allow -a longer command line to be passed to permit future kernels to extend -this limit. +The kernel command line is a null-terminated string. A string that is too +long will be automatically truncated by the kernel.
I thought it would be appropriate to add it to the older (<2.02) boot protocols specific notes.
Documentation/i386/boot.txt command line is entered using the follow · line 261
Quoted 2 lines
Documentation/i386/boot.txt +2
-0+ The kernel command line *must* be 256 bytes including the + final null.
I've removed the 256 limit from the 2.02 boot protocol since grub and lilo guys did not understand the comment: "a boot loader may allow a longer command line to be passed to permit future kernels to extend this limit.", they both truncate the command-line to 256 (hard coded). I thought that it best to make clear that the limit on the command-line length is determined by the kernel and not by the boot loader.
I can remove the addition.
Best Regards,
Alon Bar-Lev
Quoted 36 lines · Randy.Dunlap
Quoted 16 lines · On Fri, 03 Feb 2006 22:32:29 +0200 Alon Bar-Lev wrote:
Extending the kernel parameters to a size of 1024 on boot protocol >=2.02 for i386 and
x86_64architectures.Signed-off-by Alon Bar-Lev <[email protected]>---
Hello,
This patch was submitted a long ago, but did not find its way into the kernel, but was not rejected as well.
Current implementation allows the kernel to receive up to 255 characters from the bootloader.
Quoted 7 lines
In current environment, the command-line is used in order to specify many values, including suspend/resume, module arguments, splash, initramfs and more.
255 characters are not enough anymore.
Please consider to merge.
Please explain this comment and why it is being added:
Documentation/i386/boot.txt +3
-0+ The kernel command line *must* be 256 bytes including the + final null. +thanks,
---
~Randy
Quoted 27 lines · Alon Bar-Lev
diff -urNp
linux-2.6.16-rc2/include/asm-i386/param.hlinux-2.6.16-rc2.new/include/asm-i386/param.hinclude/asm-i386/param.h 2006-02-03 21:23:21.000000000 +0200 renamed from include/asm-i386/param.h 2006-01-03 05:21:10.000000000 +0200 +1
-1@@ -19,6 +19,6 @@ #endif #define MAXHOSTNAMELEN 64 /* max length of hostname */ -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 1024 #endifdiff -urNp
linux-2.6.16-rc2/include/asm-i386/setup.hlinux-2.6.16-rc2.new/include/asm-i386/setup.hinclude/asm-i386/setup.h 2006-02-03 21:19:44.000000000 +0200 renamed from include/asm-i386/setup.h 2006-01-03 05:21:10.000000000 +0200 +1
-1@@ -17,7 +17,7 @@ #define MAX_NONPAE_PFN (1 << 20) #define PARAM_SIZE 4096 -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 1024 #define OLD_CL_MAGIC_ADDR 0x90020 #define OLD_CL_MAGIC 0xA33Fdiff -urNp
linux-2.6.16-rc2/include/asm-x86_64/setup.hlinux-2.6.16-rc2.new/include/asm-x86_64/setup.h
include/asm-x86_64/setup.h 2006-02-03 21:20:40.000000000 +0200 line 6
Quoted 7 lines
include/asm-x86_64/setup.h 2006-02-03 21:20:40.000000000 +0200 renamed from include/asm-x86_64/setup.h 2006-01-03 05:21:10.000000000 +0200 +1
-1@@ -1,6 +1,6 @@ #ifndef _x8664_SETUP_H #define _x8664_SETUP_H -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 1024 #endif
(Sorry, I didn't notice your patch when you posted it in the past, or I would have responded back then.)
FWIW, this was tried between 2.6.11-rc1 and 2.6.11-rc2 (except it was 256->2048 instead of 256->1024), and it was reverted before 2.6.11-rc2 because it broke booting with lilo -- for many people, the change caused their system to freeze early during boot.
This is what the 2.6.11-rc2 changelog has to say about the matter:
Quoted 6 lines
Revert "x86_64/i386: increase command line size" patch
It's a bootup dependancy, you can't just increase it randomly, and it breaks booting with LILO.
Pointed out by Janos Farkas and Adrian Bunk.
Has this issue been addressed yet? (i.e. does 1024 avoid the problem that 2048 had, or did anything else change in the kernel between 2.6.11-rc1 and today to prevent the problem from happening again?) --
-Barry K. Nathan <[email protected]>