alpha/pci: set cache line size for cards ignored by SRM
PATCH 1/1 alpha/pci: set cache line size for cards ignored by SRM
From: Gabriele Gorla <[email protected]>
Set the cache line size in the PCI configuration space to a reasonable value. SRM does not seem to set this register for the PCI cards that it does not recognize. This makes drivers that expect cache line size to be set by the card bios work on alpha.
---
arch/alpha/kernel/pci.c 2006-02-07 14:19:59 -0800 renamed from arch/alpha/kernel/pci.c.orig 2006-02-07 14:24:59 -0800 +1 -0
@@ -108,11 +108,24 @@ static void __init pcibios_fixup_final(struct pci_dev *dev) { unsigned int class = dev->class >> 8; + u8 cache_line_size; if (class == PCI_CLASS_BRIDGE_ISA || class ==
PCI_CLASS_BRIDGE_EISA) {
dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
isa_bridge = dev;
}
+
+ /* if the cache line is not set by SRM attempt to fix it */
+ pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cache_line_size);
+ if(cache_line_size == 0) {+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ L1_CACHE_BYTES >> 2);
+ pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE,
+ &cache_line_size);
+ if(cache_line_size == (L1_CACHE_BYTES >> 2) )
+ printk("PCI: Setting cache line size of device %s"
+ " to %d\n", pci_name(dev), L1_CACHE_BYTES );
+ }
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
Quoted 4 lines · Gabriele Gorla
Set the cache line size in the PCI configuration space to a reasonable value. SRM does not seem to set this register for the PCI cards that it does not recognize. This makes drivers that expect cache line size to be set by the card bios work on alpha.
I don't see such drivers in the mainline.
Anyhow, the PCI_CACHE_LINE_SIZE setting is critical only for devices that do memory-write-invalidate. In this case a driver must call pci_set_mwi() which takes care of PCI_CACHE_LINE_SIZE.
The patch is NAKed.
Ivan.
Quoted 7 lines · Gabriele Gorla
Quoted 4 lines
Set the cache line size in the PCI configuration space to a reasonable value. SRM does not seem to set this register for the PCI cards that it does not recognize. This makes drivers that expect cache line size to be set by the card bios work on alpha.
I don't see such drivers in the mainline.
that sata_sil driver uses the cache line register to tune some FIFO registers.
Quoted 3 lines
Anyhow, the
PCI_CACHE_LINE_SIZEsetting is critical only for devices that do memory-write-invalidate. In this case a driver must callpci_set_mwi()which takes care ofPCI_CACHE_LINE_SIZE.
sata_sil is not capable of MWI so it does not call pci_set_mwi()
I looked at the config space on a PC and alpha before the sata_sil driver is loaded and it is different.
I suspect on the PC the system bios or the card bios set up this register during post.
The sata_sil driver may not be doing the correct thing, however it seems reasonable to assume that the device is configured properly (by system bios or kernel fixup) before the driver init code executes. This seems the same behavior of ppc and sparc64 pci code as well.
thanks,
GG