lpfc 8.1.2 driver update

This patch set updates the lpfc driver to revision 8.1.2, which includes the following changes:

- Remove several unused prototypes
- Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba
- Remove unused SLI_IOCB_HIGH_PRIORITY
- Handling of ELS commands RRQ, RPS, RPL and LIRR correctly
- Fixed a race condition in the PLOGI retry logic.
- Explicitly initialize the skip_post argument to lpfc_sli_send_reset on a ERATT interrupt.
- Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K
- Fixed a double insertion of mail box object to the SLI mailbox list.
- Add module parameter to limit number of outstanding commands per lpfc HBA
- Misc FC Discovery changes
- Correct use of the hostdata field in scsi_host
- Remove hba_list from struct lpfc_hba
- Add ERROR and WARM_START modes for diagnostic purposes.
- Added support for FAN
- Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static
- Code style changes for Discovery code
- Allow turning on internal loop-back mode
- Code cleanup of lpfc_mbx_cmpl_config_link
- Fixed module parameter descriptions.
- Fix panic caused by HBA resets and target side cable pulls
- Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately
- Change version number to 8.1.2

-- james s

James, we have this driver now.
Today I got this crash during bootup on a p620 (4 RS64 cpus), it ran -git9 before, now -git11. A quick look at the changes did not show anything related.
both cpu1 and cpu3 had a invalid data access at the same time, no idea which one came first.

It came up on after a second try.
Maybe there is an obvious error in the new code,
maybe 303 patches on top of Linus tree are bad.

...
Linux version 2.6.16-rc2-git11-20060212084234-ppc64 (geeko@buildhost) (gcc version 4.1.0 20060210 (prerelease) (SUSE Linux)) #1 SMP Sun Feb 12 08:42:34 UTC 2006
...
Kernel command line: root=/dev/md0 xmon=on kdb=on sysrq=1 selinux=0 elevator=cfq splash=silent desktop
...
Loading scsi_mod
SCSI subsystem initialized
Loading sd_mod
Loading scsi_transport_spi
Loading sym53c8xx
sym0: <896> rev 0x7 at pci 0000:01:01.0 irq 35
sym0: No NVRAM, ID 7, Fast-40, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.2
Vendor: IBM Model: CDRM00203 !K Rev: 1_05
Type: CD-ROM ANSI SCSI revision: 02
target0:0:1: Beginning Domain Validation
target0:0:1: asynchronous
target0:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
target0:0:1: Domain Validation skipping write tests
target0:0:1: Ending Domain Validation
target0:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31)
Vendor: IBM Model: ST318305LC Rev: C505
Type: Direct-Access ANSI SCSI revision: 03
target0:0:2: tagged command queuing enabled, command queue depth 16.
target0:0:2: Beginning Domain Validation
target0:0:2: asynchronous
target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 31)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
sr0: scsi-1 drive
SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through w/ FUA
sda: sda1 sda2
sd 0:0:2:0: Attached scsi disk sda
Uniform CD-ROM driver Revision: 3.20
scsi_id[1068]: ssr 0:0:1:0: Attached scsi generic sg0 type 5
csi_id: unable tsd 0:0:2:0: Attached scsi generic sg1 type 0
o access parent device of '/block/sda'
sym1: <896> rev 0x7 at pci 0000:01:01.1 irq 34
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi1 : sym-2.2.2
Loading scsi_transport_fc
Loading lpfc
Emulex LightPulse Fibre Channel SCSI driver 8.1.2
Copyright(c) 2004-2006 Emulex. All rights reserved.
scsi2 : on PCI bus 21 device 08 irq 55
lpfc 0001:21:01.0: 0:1303 Link Up Event x1 received Data: x1 x1 x4 xa9
Vendor: IBM Model: 2105F20 Rev: 1.94
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdb: 12500032 512-byte hdwr sectors (6400 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
SCSI device sdb: 12500032 512-byte hdwr sectors (6400 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
md: raid0 personality registered for level 0
scsi_sid[1186]: d 2:0:0:0: Attached scsi disk sdb
csi_id: unable tsd 2:0:0:0: Attached scsi generic sg2 type 0
o access parent Vendor: device of '/blocIk/sdb'
WaitingBM for udev to set tle: scsi_id[112]: scsi_id: una ble to access pa rent device of Model: /block/sdb'
2105F20 Rev: 1.94
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdc: 12500032 512-byte hdwr sectors (6400 MB)
Decbpuug: 0x3 :s Velecteorpi: 30n0 (gD afutanc Atcicesos)n acat l[cl0e00d 00fr00o3fm bib2envba0]
id c o pnct: ecx0t0 a00t0 i00n00c052lu22dce/: l.inreusxc/hpaedg_etmaaps.k+0hx:314/06xc08 l

    lr: c000000000053adc: .try_to_wake_up+0x4a8/0x51c
    sp: c00000003fbb3130
   msr: a000000000001032
   dar: c00001800048acb0
 dsisr: 40000000
  current = 0xc0000000034d07f0
  paca    = 0xc00000000048b280
    pid   = 1167, comm = lpfc_worker_0

enter ? for help
[c00000003fbb31b0] c000000000053adc .try_to_wake_up+0x4a8/0x51c [c00000003fbb3290] c000000000051c4c .__wake_up_common+0x68/0xe0 [c00000003fbb3340] c000000000055214 .__wake_up+0x54/0x88
[c00000003fbb33f0] c0000000002daafc .sock_def_readable+0x54/0xa8 [c00000003fbb3480] c00000000030115c .netlink_broadcast+0x344/0x50c [c00000003fbb3560] c0000000001c6378 .kobject_uevent+0x41c/0x4dc [c00000003fbb3650] c000000000251c94 .class_device_add+0x240/0x398 [c00000003fbb3700] c000000000254f74 .attribute_container_add_class_device+0x18/0x50 [c00000003fbb3780] c0000000002556c8 .transport_add_class_device+0x24/0x68 [c00000003fbb3810] c000000000254e3c .attribute_container_device_trigger+0x124/0x1c8 [c00000003fbb38d0] c0000000002555e0 .transport_add_device+0x1c/0x34 [c00000003fbb3950] d000000000052bb0 .fc_rport_create+0x270/0x36c [scsi_transport_fc] [c00000003fbb3a10] d0000000001504c4 .lpfc_nlp_list+0x988/0xaf8 [lpfc] [c00000003fbb3af0] d000000000158f68 .lpfc_cmpl_reglogin_reglogin_issue+0x150/0x174 [lpfc] [c00000003fbb3b80] d000000000157a58 .lpfc_disc_state_machine+0xd4/0x1c8 [lpfc] [c00000003fbb3c20] d000000000151510 .lpfc_mbx_cmpl_reg_login+0x44/0x94 [lpfc] [c00000003fbb3cc0] d000000000144b40 .lpfc_sli_handle_mb_event+0x418/0x5c8 [lpfc] [c00000003fbb3da0] d000000000152550 .lpfc_do_work+0x1c0/0xbf8 [lpfc] [c00000003fbb3ee0] c000000000079250 .kthread+0x128/0x178
[c00000003fbb3f90] c000000000024adc .kernel_thread+0x4c/0x68
3:mon> cpu 0x1: Vector: 300 (Data Access) at [c00000002f806d30]

    pc: c00000000000ecdc: .validate_sp+0x30/0x88
    lr: c00000000000ee14: .show_stack+0xe0/0x1b0
    sp: c00000002f806fb0
   msr: a000000000001032
   dar: c000000600627b20
 dsisr: 40000000
  current = 0xc0000000fe9587f0
  paca    = 0xc00000000048ae80
    pid   = 1205, comm = vol_id

...
3:mon> e
cpu 0x3: Vector: 300 (Data Access) at [c00000003fbb2eb0]

    pc: c00000000005222c: .resched_task+0x34/0xc0
    lr: c000000000053adc: .try_to_wake_up+0x4a8/0x51c
    sp: c00000003fbb3130
   msr: a000000000001032
   dar: c00001800048acb0
 dsisr: 40000000
  current = 0xc0000000034d07f0
  paca    = 0xc00000000048b280
    pid   = 1167, comm = lpfc_worker_0

3:mon> t
[c00000003fbb31b0] c000000000053adc .try_to_wake_up+0x4a8/0x51c [c00000003fbb3290] c000000000051c4c .__wake_up_common+0x68/0xe0 [c00000003fbb3340] c000000000055214 .__wake_up+0x54/0x88
[c00000003fbb33f0] c0000000002daafc .sock_def_readable+0x54/0xa8 [c00000003fbb3480] c00000000030115c .netlink_broadcast+0x344/0x50c [c00000003fbb3560] c0000000001c6378 .kobject_uevent+0x41c/0x4dc [c00000003fbb3650] c000000000251c94 .class_device_add+0x240/0x398 [c00000003fbb3700] c000000000254f74 .attribute_container_add_class_device+0x18/0x50 [c00000003fbb3780] c0000000002556c8 .transport_add_class_device+0x24/0x68 [c00000003fbb3810] c000000000254e3c .attribute_container_device_trigger+0x124/0x1c8 [c00000003fbb38d0] c0000000002555e0 .transport_add_device+0x1c/0x34 [c00000003fbb3950] d000000000052bb0 .fc_rport_create+0x270/0x36c [scsi_transport_fc] [c00000003fbb3a10] d0000000001504c4 .lpfc_nlp_list+0x988/0xaf8 [lpfc] [c00000003fbb3af0] d000000000158f68 .lpfc_cmpl_reglogin_reglogin_issue+0x150/0x174 [lpfc] [c00000003fbb3b80] d000000000157a58 .lpfc_disc_state_machine+0xd4/0x1c8 [lpfc] [c00000003fbb3c20] d000000000151510 .lpfc_mbx_cmpl_reg_login+0x44/0x94 [lpfc] [c00000003fbb3cc0] d000000000144b40 .lpfc_sli_handle_mb_event+0x418/0x5c8 [lpfc] [c00000003fbb3da0] d000000000152550 .lpfc_do_work+0x1c0/0xbf8 [lpfc] [c00000003fbb3ee0] c000000000079250 .kthread+0x128/0x178
[c00000003fbb3f90] c000000000024adc .kernel_thread+0x4c/0x68
3:mon> r

R00 = c00000000048ac80   R16 = 0000000000000000
R01 = c00000003fbb3130   R17 = 0000000000000000
R02 = c000000000625be0   R18 = 0000000000000000
R03 = c0000000fe9587f0   R19 = c00000000fdbca08
R04 = c000000004a55140   R20 = 0000000000000000
R05 = 0000000000000000   R21 = 0000000000000001
R06 = c000000004a6cf70   R22 = 0000000000000001
R07 = c000000003393870   R23 = a000000000001032
R08 = c0000000fe9587f0   R24 = 0000000000000003
R09 = c00001800048ac80   R25 = c0000000035a87f0
R10 = c000000004a55850   R26 = 0000000000000001
R11 = c0000000004341c0   R27 = 0000000000000001
R12 = 0000000000000000   R28 = c000000004a54f70
R13 = c00000000048b280   R29 = 0000000000000001
R14 = 0000000000000000   R30 = c0000000004c7e78
R15 = 0000000000000000   R31 = c000000004a550c0
pc  = c00000000005222c .resched_task+0x34/0xc0
lr  = c000000000053adc .try_to_wake_up+0x4a8/0x51c
msr = a000000000001032   cr  = 24000088
ctr = c000000000053b50   xer = 0000000020000000   trap =  300
dar = c00001800048acb0   dsisr = 40000000

cpu2 idle.

1:mon> e
cpu 0x1: Vector: 300 (Data Access) at [c00000002f806d30]

    pc: c00000000000ecdc: .validate_sp+0x30/0x88
    lr: c00000000000ee14: .show_stack+0xe0/0x1b0
    sp: c00000002f806fb0
   msr: a000000000001032
   dar: c000000600627b20
 dsisr: 40000000
  current = 0xc0000000fe9587f0
  paca    = 0xc00000000048ae80
    pid   = 1205, comm = vol_id

1:mon> t
[link register ] c00000000000ee14 .show_stack+0xe0/0x1b0
[c00000002f806fb0] c00000000000ee00 .show_stack+0xcc/0x1b0 (unreliable) [c00000002f807050] c0000000001cb214 ._raw_spin_lock+0x120/0x164 [c00000002f8070e0] c00000000036bf44 ._spin_lock+0x10/0x24 [c00000002f807160] c00000000005440c .scheduler_tick+0xf4/0x3ec [c00000002f807210] c00000000006aa44 .update_process_times+0x7c/0xa8 [c00000002f8072a0] c000000000021100 .timer_interrupt+0x94/0x404 [c00000002f807380] c0000000000034b4 decrementer_common+0xb4/0x100
--- Exception: 901 (Decrementer) at c00000000005cd64 .release_console_sem+0x1c4/0x284 [c00000002f807720] c00000000005d7dc .vprintk+0x330/0x388 [c00000002f807840] c00000000005d86c .printk+0x38/0x48 [c00000002f8078d0] c0000000000524e4 .__might_sleep+0x98/0xf4 [c00000002f807950] c000000000092468 .do_generic_mapping_read+0x1fc/0x4dc [c00000002f807aa0] c00000000009307c .__generic_file_aio_read+0x184/0x22c [c00000002f807b70] c00000000009487c .generic_file_read+0x94/0xcc [c00000002f807cf0] c0000000000c42f0 .vfs_read+0x118/0x1fc [c00000002f807d90] c0000000000c47d0 .sys_read+0x4c/0x8c [c00000002f807e30] c0000000000086f8 syscall_exit+0x0/0x40
--- Exception: c01 (System Call) at 000000000ff5cc68
SP (ffd46a00) is in userspace
1:mon> r

R00 = 0000000600000000   R16 = c00000002f807e08
R01 = c00000002f806fb0   R17 = 00000000000200e3
R02 = c000000000625be0   R18 = c0000000005eaa90
R03 = c00000002f807d90   R19 = c0000000fed52c50
R04 = c0000000fe9587f0   R20 = 0000000000000000
R05 = 00000000000002f0   R21 = c00000002f807b10
R06 = c00000002f806fe8   R22 = 00000000000200e4
R07 = 0000000000080000   R23 = 0000000000000800
R08 = 0000000000002b02   R24 = c000000000629f50
R09 = c000000000627b20   R25 = 0000000000000001
R10 = 0000000000000000   R26 = c00000002f807e30
R11 = c00000002f804000   R27 = 000000000000000f
R12 = 0000000000000020   R28 = c00000000005cd60
R13 = c00000000048ae80   R29 = c00000002f807d90
R14 = 00000000000200e3   R30 = c0000000fe9587f0
R15 = c00000003fa1c508   R31 = c0000000000c47d0
pc  = c00000000000ecdc .validate_sp+0x30/0x88
lr  = c00000000000ee14 .show_stack+0xe0/0x1b0
msr = a000000000001032   cr  = 88022444
ctr = 0000000000000000   xer = 0000000000000000   trap =  300
dar = c000000600627b20   dsisr = 40000000

cpu0 idle

looking into dmesg, its not clear anymore if lpfc is at fault:

<6>md: raid0 personality registered for level 0
<5>sd 2:0:0:0: Attached scsi disk sdb
<5>sd 2:0:0:0: Attached scsi generic sg2 type 0

<5>  Vendor: IBM       Model: 2105F20           Rev: 1.94
<5>  Type:   Direct-Access                      ANSI SCSI revision: 03

<5>SCSI device sdc: 12500032 512-byte hdwr sectors (6400 MB)
<3>Debug: sleeping function called from invalid context at include/linux/pagemap.h:168 <1>Unable to handle kernel paging request for data at address 0xc00001800048acb0 <1>Faulting instruction address: 0xc00000000005222c
<0>BUG: spinlock lockup on CPU#1, vol_id/1205, c000000004a550c0
<4>Call Trace:
<4>[C00000002F806FB0] [C00000000000ED9C] .show_stack+0x68/0x1b0 (unreliable) <4>[C00000002F807050] [C0000000001CB214] ._raw_spin_lock+0x120/0x164 <4>[C00000002F8070E0] [C00000000036BF44] ._spin_lock+0x10/0x24 <4>[C00000002F807160] [C00000000005440C] .scheduler_tick+0xf4/0x3ec <4>[C00000002F807210] [C00000000006AA44] .update_process_times+0x7c/0xa8 <4>[C00000002F8072A0] [C000000000021100] .timer_interrupt+0x94/0x404 <4>[C00000002F807380] [C0000000000034B4] decrementer_common+0xb4/0x100 <4>--- Exception: 901 at .release_console_sem+0x1c4/0x284
<4> LR = .release_console_sem+0x1c0/0x284
<4>[C00000002F807720] [C00000000005D7DC] .vprintk+0x330/0x388 <4>[C00000002F807840] [C00000000005D86C] .printk+0x38/0x48 <4>[C00000002F8078D0] [C0000000000524E4] .__might_sleep+0x98/0xf4 <4>[C00000002F807950] [C000000000092468] .do_generic_mapping_read+0x1fc/0x4dc <4>[C00000002F807AA0] [C00000000009307C] .__generic_file_aio_read+0x184/0x22c <4>[C00000002F807B70] [C00000000009487C] .generic_file_read+0x94/0xcc <4>[C00000002F807CF0] [C0000000000C42F0] .vfs_read+0x118/0x1fc <4>[C00000002F807D90] [C0000000000C47D0] .sys_read+0x4c/0x8c
<1>Unable to handle kernel paging request for data at address 0xc000000600627b20 <1>Faulting instruction address: 0xc00000000000ecdc
0:mon>

short story of a lazy sysadmin:
 alias appserv=wotan

This is IBM pSeries, isn't it? That crash is very characteristic of one we at SteelEye have been trying to track down with the help of IBM ... my suspicion is that there's a bug in the pSeries process handling code which manifests around wake up under stress.

Could you try to produce this on a non-ppc machine?

Thanks,

James

Yes, its an older pSeries, pre-POWER4. So far it did not reproduce on this system after 3 reboots.

short story of a lazy sysadmin:
 alias appserv=wotan

I'm afraid none of these patches will apply.

The problem looks to be a really weird mailer issue. Apparently every line that began with a space had two extra spaces added.

James

James,

Sorry for the whitespace confusion. James Smart is away this week, but I'll repost the lpfc 8.1.2 patches momentarily.

Thanks,
Jamie Wellnitz