Skip to contentSkip to conversation

neofb: enable LCD properly on unblank

PATCH New [email protected] 1 participant 1 message Feb 15, 2006 1 message not in the archive Framebuffer layer

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 neofb: enable LCD properly on unblank

Hi Andrew,

Quoted 4 lines · On Tue, Feb 14, 2006 at 08:16:29PM -0800, [email protected] wrote:

The patch titled

neofb: avoid resetting display config on unblank

Quoted 8 lines

has been removed from the -mm tree. Its filename is

neofb-avoid-resetting-display-config-on-unblank.patch

This patch was probably dropped from -mm because it has now been merged into a subsystem tree or into Linus's tree, or because it was folded into its parent patch in the -mm tree.

seems like I was running late with my patch to handle the LCD properly after blanking the screen.

We definitely need the patch below to get the LCD's backlight to a sane state after unblanking. Otherwise, it is disabled unconditionally, because the LCD is turned of literally in the registers during blank. Reading those again on unblank will simply not reactivate the LCD, yet DPMS was handled properly, leading me to wrong conclusions.

This adds a new variable to struct neo_par for storing a boolean whether to read the register values next time we (un)blank. For some reason it was not sufficient to check against !blank_mode while reading registers in the beginning of neofb_blank().

Reworked patch against neofb.c having neofb-avoid-resetting-display-config-on-unblank.patch applied.

include/video/neomagic.h +1 -0
@@ -159,6 +159,7 @@
 	unsigned char PanelDispCntlReg1;
 	unsigned char PanelDispCntlReg2;
 	unsigned char PanelDispCntlReg3;
+	unsigned char PanelDispCntlRegRead;
 	unsigned char PanelVertCenterReg1;
 	unsigned char PanelVertCenterReg2;
 	unsigned char PanelVertCenterReg3;
drivers/video/neofb.c +10 -6
@@ -843,6 +843,9 @@
 
 	par->SysIfaceCntl2 = 0xc0;	/* VESA Bios sets this to 0x80! */
 
+	/* Initialize: by default, we want display config register to be read */
+	par->PanelDispCntlRegRead = 1;
+
 	/* Enable any user specified display devices. */
 	par->PanelDispCntlReg1 = 0x00;
 	if (par->internal_display)
@@ -1334,12 +1337,13 @@
 	struct neofb_par *par = (struct neofb_par *)info->par;
 	int seqflags, lcdflags, dpmsflags, reg;
 
-	/*
-	 * Reload the value stored in the register, might have been changed via
-	 * FN keystroke
-	 */
-	par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03;
-
+	/* Reload the value stored in the register, if sensible. It might have been
+	 * changed via FN keystroke. */
+	if (par->PanelDispCntlRegRead && !blank_mode) {
+		par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03;
+	}
+	par->PanelDispCntlRegRead = !blank_mode;
+	
 	switch (blank_mode) {
 	case FB_BLANK_POWERDOWN:	/* powerdown - both sync lines down */
 		seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */