EST8260 has bogus bd_info
PATCH 1/1 EST8260 has bogus bd_info
I managed to rescue an old EST8260 board from a life as a doorstop, and after sticking u-boot on it, I was getting nothing but a silent death. I eventually discovered it wouldn't boot because est8260.h had its own personal copy of an ancient bd_info struct that doesn't match any U-boot from this century.
Signed-off-by Paul Gortmaker <[email protected]>
arch/ppc/platforms/est8260.h +5 -20
@@ -6,30 +6,15 @@#ifndef __EST8260_PLATFORM#define __EST8260_PLATFORM +#include <linux/config.h> +#include <asm/ppcboot.h> +#define CPM_MAP_ADDR ((uint)0xf0000000)#define BOOTROM_RESTART_ADDR ((uint)0xff000104)/* For our show_cpuinfo hooks. */ -#define CPUINFO_VENDOR "EST Corporation" -#define CPUINFO_MACHINE "SBC8260 PowerPC" - -/* A Board Information structure that is given to a program when -* prom starts it up. -*/ -typedef struct bd_info { -unsigned int bi_memstart;/* Memory start address */ -unsigned int bi_memsize;/* Memory (end) size in bytes */ -unsigned int bi_intfreq;/* Internal Freq, in Hz */ -unsigned int bi_busfreq;/* Bus Freq, in MHz */ -unsigned int bi_cpmfreq;/* CPM Freq, in MHz */ -unsigned int bi_brgfreq;/* BRG Freq, in MHz */ -unsigned int bi_vco;/* VCO Out from PLL */ -unsigned int bi_baudrate;/* Default console baud rate */ -unsigned int bi_immr;/* IMMR when called from boot rom */ -unsigned char bi_enetaddr[6 ]; -}bd_t ; - -extern bd_t m8xx_board_info; +#define CPUINFO_VENDOR "Wind River" +#define CPUINFO_MACHINE "EST SBC8260 PowerPC"#endif /* __EST8260_PLATFORM */