Skip to contentSkip to conversation

tftp can not load file!

U-Boot-Users junping feng 2 participants 2 messages Feb 20, 2006

lore
Share & tools
lore
#0 lore raw

Dear,
My uboot1.1.4 has working on my board,but tftp has not working normally.
During using tftp,that following:

=>tftp 0x100000 pImage
using FCC1 Ethernet device
TFTP from server 192.168.1.10,Our IP address is 192.168.1.6 Filename 'pImage'
loading address : 0x100000
loading : fec: tx error
T fec :tx buffer not ready
fec:tx buffer not ready
T fec :tx buffer not ready
_

Tftp can not load file to sdram or flash, please help me.Why is it?

---------------------------------
??1G???????????
????-?????????
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060220/68642be1/attachment.htm

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

Tftp can not load file to sdram or flash, please help me.Why is it?

Seems you have a problem in yyour port of U-Boot. Debug and fix it.

Quoted 3 lines

--0-1831942332-1140403764=:26274
Content-Type: text/html; charset=gb2312
Content-Transfer-Encoding: 8bit

And don't post HTML on this list.

Thanks.

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Never underestimate the bandwidth of a station wagon full of tapes.
                                -- Dr. Warren Jackson, Director, UTCS